Croydex Ontario Flexi-Fix Wooden Toilet Seat with Patented V Plate Adjustable Hinges, Quick Release, Anti-Bacterial, Rust and Stain-Free Chrome Plated Hinge Covers, Toilet Seat Soft Close

Speedy delivery, toilet seat is quality, easy to install with options for top or bottom fixing. Looks good and soft close works as it should. Recommended

Fitted by my son easily. All seems great and very satisfied so far.

Fitted today and so far so good. I hope I've done it right. First time I've ever changed a toilet seat. It feels secure but not gonna start wiggling it to check. I had thought that maybe I'd hear a click when the pins click back but I didn't so just hope they have retracted. The seat isn't as heavy as I'd thought it was gonna be but very nice in appearance and just hope it holds up well. Easy to install and looks good. The buffers are quite high off the pan. Overall am happy and it was much cheaper on Amazon than other places I looked.

Top

ProcedureRemove the Screws securing the Old Seat.Clean Lavatory Pan and surround with Anti-Bac Spray and a Clean Cloth.There are 2 Systems, Open and Enclosed, or TOP BOTTOM.If the system is an Enclosed System with No Access to the Nuts, Lift off or Push through the Old existing Bungs into the inside of the Lavatory Pans, and Press Fit the supplied New Rubber Bungs.(A Tip here is to apply a small amount of Washing Up Liquid to your Little Finger and wipe around the Holes before pressing down and fitting the Rubber Bungs, this will make fitting of the Bungs easier).Taking the Stainless Steel Hinge Plates lift off the Stainless Steel and Plastic Cover Plates at the upper and lower surface, Remove the Protection Tape from the Adhesive Pads.(Note that the SS Hinge Plates have Small Legs suspending the SSHP from contacting with the surface of the Lavatory Pan, so allowing the SSHP to slide around freely in adjustment).Fit the SSHP over the Holes in the Lavatory Pan, Fit the Through Bolts and Nuts on the Open System, the Closed System requires only the Bolt, do not tighten the Nuts.(Tightening the Nuts and or Bolts at this stage will collapse the Small Supporting Legs suspending the SSHP free from the surface of the Lavatory Pan so allowing the Adhesive Pad to stick onto the Lavatory Pan).Fit the Spacer Bridge to the Pegs on the SSHP.(The Spacer Bridge ensures that the dimension between the Pegs on the Lavatory Seat is the same as the Holes in the Lavatory Pan).Fit the New Lavatory Seat to the SSHP Pegs.(Smear a little Vaseline over the Pegs, you may need to slide and wiggle the Seat around forwards and backwards)Fold the Seat down, carefully and slowly, not forcing it, and position the Seat so that you can just feel the edges of the Buffers on the underside of the Seat, pull the Seat forward and sideways to adjust.Check that you have got the Seat positioned so that each side is equal feeling against the Lavatory Pan, Distance Forwards, Distance Sideways, feeling for the Buffer on the underside of the Seat.Then tighten the Bolts a little further, make a final check.Fully Tighten the Nuts and or Bolts and remove the Spacer BridgeThe Final Tightening of the Bolts will collapse the Small Supporting legs and allow the Adhesive Contact Pads on the SSHP to attach themselves to the LP.You don’t need to overtighten the Bolts and Nuts as the main grip is now the Adhesive Contact Pads.The Adhesive Contact Pads stop the Seat from sliding with wear.The speed that the Seat Closes can be adjusted by removing the End Caps from the Cylinder and rotating the Nuts left and right, at either end, Left side Nut adjusts the Seat Cover, Right side Nut adjusts the Seat.For further views and detail see Croydex Video, and also YouTube.We chose Light Teak, Composite Material, Warm, Lightweight, we bought one, fitted it, then bought another, a very good Lavatory Seat replacement with a good range of materials and colours, operates brilliantly, we worked slowly and patiently through the instructions and had no problems fitting, good buy at a fair price, and, its British.