AVLT Dual 13"-43" Monitor Arm Desk Mount fits Two Flat/Curved Monitor Full Motion Height Swivel Tilt Rotation Adjustable Monitor Arm - White/VESA/C-Clamp/Grommet/Cable Management

I'm so impressed with these arms. They're super strong and sturdy holding up my 27" monitor and 34" ultrawide monitor. Setting up for the most part is pretty simple and easy.One of the best things I like about these arms is the cable management. I had several arms before for my setup at home and work, and the cable covers are usually pretty flimsy and just slide and lock in. I have a lot DP and HDMI cables due to my dual workstation, so these cable covers often end up popping out since its so full. These cable covers are different since they are screwed down tight with a bolt. All my cables fit pretty snug, but there is no bulging and I don't have to worry about the covers popping off ever again. I'd recommend keeping it at a maximum of 4 thicker cables though. However, fair warning that attaching the covers can be a pain so if you have to detach cables often, the screwed in covers can be a problem. If you have a set up like mine that won't really change often, it works well. If you can, I would suggest having 2 people set up the cable management. One to hold down the cover in place and the other to screw it in. I did it myself just fine though.The range of motion is great for my needs, but please note that I tried stacking my monitors and it didn't quite work. I would say it's 1 to 2 inches shy of properly stacking them.Overall, a great looking set of dual monitor arms. The extra ports on the base are a cool feature that do work, but I haven't had much use of it yet. Love that they had a white option to match my set up too. These are a little pricey, but they're really worth it!

Nearly perfect. Easy to install, strong, mostly easy to use, along with some added conveniences. I have a 24+ lb monitor from 2006. This was the first arm I've tried that was able to handle it, and it handles it as well as the newer 12 lb monitor next to it. I used a grommet install style and found the whole process painless.2 bad points:1) Tilt strength is controlled by a single bolt and sandwiched rigid and soft washers. It holds the monitor in place well. However, if you want to adjust the tilt, this bolt has to be loosened and retightened to complete the process. There is no sweet spot (for my lighter monitor, anyway) where it holds the monitor steady but allows for simple adjustments when needed. This makes rotating to portrait mode (which I do once or twice a day) a longer process than I like2) Cable management, when finally set up, is fine. However, the design is a bit thoughtless. The top section, which has plenty of clearance from the desk and the base piece, has a single screw holding it in place. Easy to remove, insert the wires and replace. The bottom section, which is much closer to the desk and the base piece, has two screws, one of which is right up against the desk and base piece. Why this one has two screws when it needs the single screw design of the top section much more is a mystery.That's it. The rest is great. Installation. Stability. Adjustments (other than tilt). Look. The extra USB and audio ports. Well worth the extra expense over the sub $100 options.The cable management and tilt issues are why the $300 options exist, I'm sure.

This is nice and sturdy. It has no problem holding my 34" 4K monitor on one arm and the other one holds my Surface Book Pro 3 (with an adapter purchased separately). With the Tension screws I can get it just right so it's doesn't move but I can easily re-arrange it.One complaint - the headphone / Mic jacks in front are nice but not useful since the other end of those jacks are RCA plugs. Most PCs, Docking Stations and all Laptops these days use a combined Mic/Headphone. This design seemed a little dates. So I don't even use those now. Love the USB - might need USB-C also these days.

I bought this dual monitor arm desk mount for my wife’s computer to mount two 32” monitors. Unpacking and installation were fairly straight forward. The only two issues I had were: 1). Instructions state that this mount can be installed using a grommet hole in a desk to secure it to the desk. However, most grommet holes in desks (at least in the United States) are 2” holes. The grommet mounting option uses two all-thread bolts screwed into the base, but the outside spacing of the bolts is about 2-1/4” which, of course, is too big for 2” grommet holes. I ended up drilling two smaller holes in the desk, one for each all-thread bolt. On the plus side, this option secures the mount to the desk very securely. 2). There is no guidance in the installation instructions for optimal placement of the arm mount on the desk. I ended up temporarily installing the lower set of arms on the mount base and then experimented moving the base around the desk while swinging the arms to make sure they would clear all computer and other equipment on the desk as well as the walls. This method worked well and final placement clears everything while still giving full articulation of both arms. The unit is very heavy-duty and quality is excellent. Other than the two items mentioned above I am very impressed with this product. After installing this unit on my wife’s desk, and playing with it for a few days, I ordered one for my desk. Because of the two issues above I would give this 4-1/2 stars if I could. But these smaller issues are not enough for me to lower my rating to 4 stars, so 5 stars it is.