Desertcart Logo

Q: I have a 54-55 gal. corner tank. would i be able to make this work? each corner 'side' measures 27". it's also 27" from back corner to front of tank.

Hello Cinda, sorry for the delay in answering your question. A spray bar that short on the FX series will be jetting water with a good deal of force. I would certainly aim the holes at the back glass of the aquarium, proper hole alignment when aimed at the back glass still provides excellent surface and offers a great deal of extra flow reduction. If l were to try this l would purchase the 42" model and only use "2 legs" . Each of the 2 legs would need to be trimmed 3/4" on all four ends to get the entire assembly down to 27". The installation has possibilities especially with the bar ports aimed to the back glass. If you are willing to try this just remember the product is being customized to a length and configuration other than for which it was designed. Hope this helps! Thanks so much for your interest in our Product 👍! -walt

Q: Does it require glue or is it tight enough after assembling?

Good question! All Flow Tamer Spray bars made for any Fluval canister filter(both FX series and 06/07 series) do not require glue as they are "sub-surface" installations. All components "dry fit" snugly together and can be disassembled whenever cleaning is necessary. Other Flow Tamer Spray Bars that employ an "over the rim" installation are factory glued in the appropriate places to facilitate immediate installation upon receiving them, thanks for asking! -walt

Q: How big is the each hole? Thank you.

Hello Jey Sohn! Each hole is 3/16" -walt

Q: What size would i need for a 125 gallon

Good morning Jack! Good question, with a 125gal you could accommodate the largest size of 54". It depends on your stock and what you want to accomplish. If l were keeping fancy goldfish or Angels/Discus l would go for the longest 54" model in order to optimize "flow dispersement". If you are keeping larger/stronger stock the 42" will work for sure. Alot of folks with a 72" tank go right for the 54" bar and this gives them the option to remove a "leg" and increase flow intensity if they desire. The 32" model was designed with the FX4 in mind to be used in smaller tanks that are 36" in length, however folks running 2 FX6's in a 72" tank will buy 2ea 32" models and run one on each filter. Still yet another option which customers put us onto here at Flow Tamer is to stagger two 42" or 54" bars in an under/over fashion. We hope this info helps you with your decision. Thanks again for your question/inquiry!! -

Deliver to Cyprus

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

**AVAILABLE IN 32",42" AND 55" MODELS** PARTNER UP YOUR SPRAY BAR WITH THE FLOW TAMER INTAKE/PREFILTER NOW AVAILABLE FOR THE FX4/5/6! AT FLOW TAMER WE PROVIDE HIGH QUALITY AFTERMARKET FILTER ATTACHMENTS MADE FROM THE FINEST MATERIAL KNOWN TO THE AQUARIUM HOBBY. WE NEVER USE COST SAVING MEASURES SUCH AS RUBBER FITTINGS. ALONG WITH SOLID CONSTRUCTION AND SMART DESIGN OUR SPRAY BARS INCLUDE MORE HOLES PER LINEAR FOOT THAN THE OEM MODEL FOR SOFTER FLOW. UNLIKE OEM MODEL FLOW TAMER SPRAY BARS INCLUDE MULTIPLE MOUNTING OPTIONS WHICH INCLUDE "KEEPER RING CLAMPS" THAT ALLOW MOUNTING WHEN USING TEXTURED 3D BACKGROUNDS. ALL FLOW TAMER SPRAY BARS ALSO INCLUDE THE NEW "FLOW SOFTNER CAP" WHICH ALLOWS YOU TO FURTHER REDUCE FLOW PRESSURE IF DESIRED! PLEASE CHECK OUT OUR DOUBLE DRILLED 32" MODEL THAT PROVIDES THE SOFTEST FLOW OF ANY "SHORT BAR" ON THE MARKET! AT FLOW TAMER WE HAVE THOUGHT OUTSIDE THE BOX TO BRING YOU THE BEST FLOW MANAGEMENT OF ANY SPRAY BAR ON THE MARKET FOR YOUR FX SERIES FILTER! OUR PRODUCT NOT ONLY OUTPERFORMS BUT IS ALSO CONSTRUCTED OF BETTER MATERIALS THAN OUR COMPETITION, AND AT A CHEAPER PRICE! BRAND NAME IS NOT ALWAYS BETTER! PLEASE SEE VIDEO AND READ THE FABULOUS REVIEWS GENERATED BY THOUSANDS OF SALES! WE KNOW YOU ARE PASSIONATE, IT IS WHAT MOTIVATES US TO PROVIDE YOU WITH THE BEST PRODUCT AVAILABLE!

Have a Question? See What Others Asked

I have a 54-55 gal. corner tank. would i be able to make this work? each corner 'side' measures 27". it's also 27" from back corner to front of tank.

Does it require glue or is it tight enough after assembling?

How big is the each hole? Thank you.

What size would i need for a 125 gallon

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Suresh K.

Very impressed with the quality and fast delivery. Will shop here again.

4 days ago

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving millions of shoppers across more than 100 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

View all Trustpilot reviews

Flow Tamer 42" Spray Bar Kit Compatible with Fluval FX6 FX4 FX5 High Performance Canister Filter

Description

Have a Question? See What Others Asked

Common Questions