eSUN PLA+ 3D Printing Filament 1KG, Enhanced Toughness, Fire Engine Red | Dimensional Accuracy +/- 0.03mm, 1.75mm 1KG Spool(2.2 LBS) 3D Printer Filament for 3D Printers

I’ve tried quite a few different PLA filaments over the years, but eSUN PLA+ has become my go-to choice. I use it regularly for 3D printing wargaming terrain as well as miniatures, and it’s consistently given me excellent results on both. The prints come out clean with good detail, and I’ve found the filament to be very reliable with hardly any failed prints.It feeds smoothly through my printer and sticks well to the build plate, which means I can just start a print and let it get on with the job. Whether I’m printing large pieces of scenery or smaller, more detailed models, the quality has always been impressive.The spool is neatly wound, so I haven’t had any tangling issues, and the finished prints are strong enough for regular gaming use. For the price, it’s excellent value, and it’s the filament I keep coming back to. I’d happily recommend it to anyone with a 3D printer.

The **eSUN PLA+ Filament 1.75mm** is a fantastic choice for 3D printing enthusiasts who need enhanced toughness and durability without compromising on print quality. This **PLA Plus filament** builds on the easy-to-print properties of standard PLA, offering increased impact resistance and tensile strength, making it ideal for more demanding applications such as functional prototypes, mechanical parts, and detailed models.The filament is manufactured with **strict diameter tolerances**, ensuring smooth and consistent extrusion, which results in high-quality prints with minimal stringing or warping. Its excellent layer adhesion further enhances the strength and durability of printed models. Compatible with most FDM 3D printers, the filament is user-friendly, making it suitable for both beginners and experienced users.Available in a variety of vibrant colors, the **eSUN PLA+ Filament** produces prints with a smooth, polished surface finish. Whether you're creating decorative items, functional components, or artistic projects, this filament delivers reliable performance with enhanced toughness, making it a go-to choice for achieving strong, professional-grade results.

I love eSun filament and find the PLA+ is absolutely fine for at least 90% of all my prints (I mainly print functional stuff).It is just as easy to print with as standard PLA, but with better properties, so it is a bit of a no brainer.There have been a few rolls that have benefited from being put through the drier for a few hours before use, but that's about it.I tend to bump the hotent temp up by about 10 C compared to the standard PLA as well.Some prople complain about badly wound rolls, but I have never come across that. I have also never had any clogs or exces stringing (aside from when I have messed up).I have used this on both an Ender 3 v2 and K1 Speedy without issue.

I've been using eSun PLA+ since I began 3D printing in May. I went through 9 x 1kg spools (1 silver, 2 purple, 1 cold white, 4 black and 1 grey) without any problems. The next spool (grey) was stringing like mad, no matter what temperature and retraction settings I used. I switched to a spool of purple and had no issues, so it wasn't something wrong with my printer.So, after chatting online with some more experienced printers, I bought a filament dryer. I weighed what was left of the grey spool (approx 900g including the spool) before putting it in - after 4 hours I took it out and weighed it again - it was 4 g lighter. That told me that the stringing problems I'd been having were down to excessive moisture in the filament.Once the purple roll was finished I put the now dried grey roll back on and it printed fine until near the end (probably about 150-200g of filament remaining) where I found it was a bit tangled - actually, I realised what was happening because it almost jerked the spool and roller off the shelf above the printer. Luckily I caught it before it wrecked a print, not to mention the printer. I shifted the spool onto the normal frame-mounted spool holder.At that point I went to put the next roll of grey into the filament dryer and saw that it was really badly wound. I spent several hours winding it onto an empty spool, then back onto the original spool. It was quite clear to me that it had been very badly rewound onto the spool it had come on - the filament was twisted and in many points looked to be stressed. I then dried it for 4 hours, leaving it in the drier until the roll on the printer finished. It started printing OK, but then there was some stringing again - I think it probably needed more than 4 hours in the drier. Yesterday I switched over to a roll of purple. It looked to be much better wound...right up until it got about 3 layers down where the filament started to get stuck under what should have been lower layers.Interestingly, all three spools I've had problems with were ordered during September. I suspect that there must have been a major issue at their plant a few months ago for their quality control to have slipped so badly.I'm reluctant to change brands as up until these three spools I've had a great experience with the eSun PLA+ - zero clogs, great print quality, good layer adhesion. However, I do have some Sunlu PLA+ to try.

Great quality, looks nice on print and doesnt smell cheap.

eSUN PLA+ Filament 1.75mm.I use a lot of PLA filament and it is usually super easy to print with. I wanted something easy to print with and stronger for parts on a radio-controlled model car. The first prints I had tried were just standard PLA but proved to be too brittle so I tried to print them in polypropylene. This proved to be both difficult and too flexible, the parts curled badly and were far too bendy for the purpose intended.I knew about PLA plus but hadn't tried it yet, reading up on it, I decided to give it a go.I am so glad I ordered the eSun PLA+, it prints like a dream, the finish is good, bed adhesion is good and parts seem much stronger. I even increased my normal print speed by 20% (having read some reviews).For PLA prints, I use a Bowden set up 3D printer with a plain borosilicate glass bed and the eSUN PLA+ Filament prints stay put brilliantly and the glass side finish is really smooth and even.I would definitely recommend the eSUN PLA+ if you are looking for a filament that is a bit tougher and super easy to print with.My print settings for this were Print Head 210ºC Glass Bed 60ºC Print Speed 60mm/s

Great filament. Brillaint colour.

This is a staggeringly bad filament, brittle with poor layer adhesion (bed adhesion is fine) and with extra brittle spots (fresh out of the bag) on the reel that snap whilst printing leading to print failure. I've not managed to achieve a successful 2 hour + print with this filament thus far without the filament snapping on the reel. The finished prints are also extra brittle with poor layer adhesion which is totally counter to the point of a PLA+I have use other eSun PLA+ colours successfully so i think this Blue colour may be particularly bad.1/10 a total waste of cash, out of the ~40 filaments i have used, and several hundred prints i have done, this is the worst.On a general note, eSun spool winding is much worse than it used to be.See picture for a back to back temp tower test of the appalling eSun PLA+ Blue (left) with a quality orange filament (right).

Printen vanaf 210 graden!

Assez bonne facture, j'en suis content!

N'utilisant que du Filament ESun depuis des années, je n'ai jamais déçu (pla, pla+, lw-pla, petg, tpu). Cependant ce Filament orange en particulier est magnifique une fois imprimé. La couleur reste éclatante et uniforme.J'ai utilisé ce Filament pour imprimer la structure de mon planeur radiocommandé, qui sera entoilé de tissus de parapente.Je recommande ce produit, j'en recommanderais moi même assez rapidement, bobine presque vide

I have used eSun PLA+ filament for several years on a Voron 2.4 printer. Until recently I was getting near-perfect results every time.The last batch I ordered came in the new cardboard spool. The result straight out of the vacuum sealed factory bag is CATASTROPHIC. Bubbles everywhere and stringing as bad as PETG. Horrible !Unfortunately I have missed the return window otherwise I would have sent it back.

Good print quality and very strong for Pla