ROMECH 200W Hot Knife Foam Cutter Kit, Electric Styrofoam Cutting Tool | Clean Smooth Cuts, Fast Heat-Up, 15-Level Heat Control, Blades & Case Included, Cuts EPS, XPS, EPE, EVA Foam, KT Board

This is a great foam cutter, especially for the price. My business uses curved foam blocks as void fill for specific pre-cast concrete products. I used to order the blocks pre-cut to shape, and at $5.00 apiece, they weren't cheap. Now, I can buy bulk foam sheets and cut the blocks myself using a table-top jig. That drove the price down to around $1.80 apiece. The money I save means this tool literally paid for itself with the first 50 blocks I cut. It does get warm after a while, and the instructions say to let it rest for roughly the same amount of time as you use it (10 seconds on, 10 seconds off, for example). My cuts are short, averaging 20 seconds a run, and it takes about that long to reset the jig after a cut, so this thing is perfect for the job. Kit comes with all the bits you need, including the Allen key required to attach or remove the blade. The blades have individual cases. There is a cleaning brush and a simple set of instructions. My only beef with this thing is that the instructions don't provide temperatures for each heat setting, but a little experimenting had me cutting with minimal smoke in under 5 minutes. Pro tip: KEEP THIS THING MOVING! If you have to pause during a cut, pull the blade clear of the foam, or the results will be sub-optimal to say the least! That's not a fault of this tool, just the result of high heat in close proximity to foam products. It lives in a very solid vacuum formed case with a slot for every part. Each part locks into the case securely when stored, so no worries about jostling or tumbling parts getting beat up or broken in transit. All in all a very good tool at the right price. Highly recommended!

Tried so many styrofoam cutter & they have all been useless. No quick heat, flimsy cutting wire. no on/off trigger. This one has it ALL. Changeable heating rods, trigger operation & fast heat. It's the absolute benchmark & probably good enough for work use. For home it's a winner!! Bonus - comes in a nice case with a stand plus its can hang. HIGHLY RECOMMENDED. One that works!!

The only thing I did not like was the mechanism for supporting the iron when not in use. There was a thin metal support onto which you are supposed to lean the hot iron, but it seems a bit wobbly when the cord is coming out of the base of the gun and the hot iron is on the stand. If they could engineer a slightly stronger option, it would improve. The tool cuts like butter, though, and did exactly what I hoped it would do!

Works as it should. Just clean good when you're done and it will last. Car is good too

This was easy to use. It does get quite hot and you need to move it and not leave it in one spot for too long, but it works quite well. It cut large pieces of foam for me like running a butter knife through butter. It’s not always the easiest to shape, depending on how thick your foam is, but it gets through dense and thinner, more airy foam quite easily. I would recommend this.

Came damaged, broken case. It works okay, has 2 blades, they both get hot. It is kinda cheap but I expected that. A little disappointed it came damaged and the case is broken but glad it still works.

We have been getting frozen foods that come in a styro chest inside of a cardboard box. Cutting the styro up was a challenge with either a knife or saw, making a mess of small particles. This hot knife cutter eliminates that problem and makes clean cuts. I bought this particular unit due to the availability of replacement knives. Cutting the styro is easy enough, the only tricky part is that the knife blade wants to twist as it cuts along the separated halves. It seems better closer to the screw clamps. I might try a shorter blade in the future. It does the job that I wanted it for, so I am satisfied.

Works great, does exactly what it says it will

Very simple and intuitive to use, just install the blade and you are good to go. This tool cuts through 2 inch thick rigid foam VERY quickly, most likely because it does get very hot immediately. Make sure you have a place to set it down between cuts because this thing is ready in seconds, since it does get so hot I would recommend that you use leather gloves because the potential to burn your digits is quite obvious once you pull the trigger on this device. I use gloves because I am old and fumbly. The reason I bought this device is because I need it to cut insulation panels to fit precisely on my RV motorhome, I am in southern British Columbia a couple of miles from the 49th parallel. I don't care what anybody says, when you live North of the 49th, you are gonna need some skirting and insulation up here in the Great White North and THIS IS the tool to get the job done. It allows you to quickly make nice clean cuts through rigid insulation panels quickly and, it does not look like a 2 year old did it when you are done. I personally have not had a problem with residue being left on the blade, although the tool comes with 2 blades and cleaning brush and instructions on how to use this specialty tool. It has already met and exceeded my expectations and it appears to me this item will last for many years to come.

returned 5 minutes after receipt. the product is sold in Dubai where the current is 240V AC while on the product it is indicated that it works at 110V AC. This info does not appear anywhere in the specifications.

Incompatible with Australian electrical supply voltage.

This product broke down within 5 minutes of its first use. Very dissappointed.

Merci beaucoup pour votre produit, c’est très efficace et rapide. Ce couteau chauffant est merveilleux ce qui facilite le travail et fait de belle coupe propre ce qui empêche le ramassage de milliers de bulles lors d’une coupe de styrofoam. Je recommande ce produit fortement. Merci beaucoup et je vous félicite pour votre bon service . Bon courage à tous Michel