Glarks 120Pcs 10 Size Mini Fuel Injection Style Hose Clamp Assortment Kit For Diesel Petrol Pipe

Much better and more secure than the worm style clamps. I used these when replacing the fuel lines and love how sturdy they are and how easily they tighten to the fuel lines. No more clamps stripping out when you try to tighten them. This gives you a good selection of sizes and each clamp has the size printed on the side of the clamp so there’s no guessing. I’ll never go back to work style clamps again.

Very high quality! Excellent kit to have around! Good price!

The Espresso Machine blew off the hose to the steam wand. The clamp holding the hose to the wand's male spigot was misplaced by the manufacturer outside the spigot's barb. That clamp was of the non-reusable crimped-on types. I had no very small clamps of any type. This kit comes with 10 sizes of clamps, each covering a 2 millimeter (approximately 0.080-inch) diameter range. I measured the hose O.D. and picked a clamp that spanned that range. Because the clamps are tightened with a flat blade screwdriver or a hex nut driver, it was easy to reach and accurately tighten the clamp. I'm confident this clamp is good for the life of the espresso machine AND I now have lots of clamps for the next repair or project.

Works exactly as described, much better than standard hose clamps. Plenty of choices for just the proper ft. Would buy again for sure.

This review will compare to a similar sized OEM Nissan fuel injected clamp for reference. First off, this is great value for money... you can't go wrong with the assortment, although for 5/16" sizes, you may want more. That said, I've used Glark's clamps for some years now & I can safely say while they're ok, they aren't the sturdiest compared to oem in long term environments. First off, the material is quite soft and over time corrodes. OEM on the other hand is quite stronger with a tougher steel. Also, the fastening nut is a flat head grooved, small 7mm size that over time when it corrodes, is a failure point. OE in comparison uses a larger head and strictly hex with no screwdriver grooves... stronger & safer for fuel connections. Also. the OEM has retainers on BOTH sides. The Glark's only has one. The other side is simply folded for the screw and another weak point that is prone to corrosion due to the thinner metal. Another nice touch is OEM has edges to their clamps. so that the other end slides smoothly without going out of alignment when tightening down... something Glark's unfortunately does. All in all they work well when new. But if your environment has corrosion to deal with, it would be best to check them every now and again. Sadly the fact is these clamps are the same as many bargain ones being sold, so if you want something better, search OEM or higher end clamp brands.

Good quality and clamps nice.

After the LS swap in my truck I used a kemso 340 fuel pump to provide enough fuel volume to the engine. It kept blowing off the hose in the tank. These used in combination with some locktite glue, the in tank hose has not blown off since. The issue left me on the side of the road multiple times, and I was very pleased that these solved the issue and it has not left me stranded since.

Good variety and sturdy construction so far. Have not exposed to the elements, so I can't speak to corrosion resistance. Overall good value for the money.

Good product

These hose clamps are great! Very sturdy quality design! They won’t cut into hoses’ a must buy!

Praktisch und gut

Variedad y buen producto.

Boite a collier bien recu et vraiment un plaisir car ilya beaucoup de modèles. A recommander si besoin