CableMod CM-VPB-HDK-R Vertical Graphics Card Holder with PCIe x16 Riser Cable 1 x DisplayPort 1 x HDMI - Black :: (Components > Video Graphics Cards)

Took me around 15 minutes to install. Overall pretty easy although bending the PCI-e extender felt ugly - with the card being set further into the case at rear and side, the PCI-e ports are not aligned.I realise it seems expensive, but you get what you pay for. The materials and finishing are good, you get a PCI extender (generally not cheap) and a custom DP and HDMI cable. I think the price is reasonable.The major plus for me was the drop in GPU temps. At heavy load it's come down 10+ degrees, so now I can play games without opening the case side panel! Good times.

Great piece of kit. Love the look of my graphics card now it is vertically mounted. Give great clearance from case and doesn't effect performance. Only downside to this product is the access to the ports on your card. You get 2 cables included (right angle adaters) but if you use more than 2 monitors, you can always buy more cables.Super easy to install and very sturdy.

The kit is super easy to install and fits in nicely once you remove all the PCI brackets from the back of your case. It positions the card a couple of cm from the brackets and provides an angled DP cable and angled HDMI pass-through so that you don't have to saw off the bracket rails on the back of your case, keeping everything intact. The PCI raiser cable is sturdy with limited flex but, you will have to bend it to hide it behind the gpu so that everthing looks neat.The kit does suffer from gpu sag and I think the 2 retention screws CableMod provides to secure the gpu are way to small for the job. Would prefer to use normal thumbscrews as there is a bit of wobble when screwed in.If you are going to buy this, make sure you have enough length in your VGA power cables because you will have to loop them behind the gpu, again for aesthetic reasons. If they have enough flex, they should tuck nicely behind the gpu so only the connectors are visible.Also, shout out to Overclockers.co.uk who sold me this kit on Amazon. Delivery date was scheduled between the 7th and 10th of June and the package arrived on the 4th!

Probably the best vertical GPU bracket out there and provides far better cooling position than some of the other vgpu brackets on the market because it's sits further back in you case and further away from your PC's glass side panel.Temps are very good thanks to it's positioning and I am getting around 72c with my zotac 3090 while gaming.Cables were a bit fiddly to get in the right position when mounting but with a little patience I got it sorted.Seems like a solid all round kit.

I suggest to not get this product I had major issues with it and I thought it fried my strix 2080ti had a major grounding issue that effected the video out put and a constant whining through the aduio, its also very awkward to install. I tried it in my nzxt h700 with my Asus strix 2080ti.

The media could not be loaded. I installed this vertical bracket into a Phanteks P600S case, graphics card being a Gigabyte 3080 Ti. Pretty easy job, fits perfectly, keeps temperatures down compared with Phanteks standard vertical mounting solution which pushed the card too close to the glass panel. Needless to say that also looks way better vs horizontal position.

The supplied Display Port cable did not work. No signal. Had to use my own.Amazon customer service terrible !!!!!!

Title says it all .... no riser cable useless

My case is the NZXT 510.  I bought this kit because it mounts my gpu as far back from the glass to give maximum airflow with this case.  Bracket quality is thick steel with a flat black powder coat finish.  Instructions are online only and pictures are of an older version of the product, but still very easy to follow.  There is one hdmi extension with the special angle plugin to the card.  The DP cable however is NOT an extension but an actual 8ft cable, the cables are of the best quality as well.  Installation is easy just remember to not aggressively bend the supplied riser cable.  Once assembled and screwed into place the card is solid and will not move or sag.----Things to think about before buying this product ----Be aware of the install and the type of card you are using.  The kit will extend about an inch and a half to the length of the card installed due to the cage that holds the special cables, so check to see how much space you have to make sure it will fit in your case.This product takes up SEVEN slots in the case, and with my case that is all of my slots!  If you have any PCI-e cards ie. sound card, capture card, streaming card, or dual gpu's this will NOT work.Overall, expectations all met and shipping was super fast. Pictures attached to show what I am babbling about.

It’s perfect. It functions, looks, and was designed perfectly. Not only does this allow the GPU to breathe better than traditional vertical mounts, but it also seems to really center the card in the middle of the case.It’s extremely sturdy (as long as you tighten it down properly), does not sag, and includes everything required to mount your GPU. This was the final touch I needed to finish my system.Pictured is my ASUS ROG Strix 2080 Ti mounted on my NZXT H710 case.

Pas encore monté j'attends ma rx6800xt ouais ça ma l'air d'être au top de bonne qualité le support est gris français non noir mais ça passe crème dans une conffig black.

The media could not be loaded. Bei der Cablemod Grafikkartenhalterung handelt es sich um ein schönes Gimmick, mit dem man seinen PC optisch aufwerten kann. Dementsprechend muss jeder selbst wissen, ob er/ sie es braucht und dafür Geld ausgeben möchte. Falls ja, halte ich den Preis von 60€ angesichts der guten Verarbeitung und Qualität sowie des Lieferumfangs inkl. HDMI- und DisplayPort-Kabel für fair und angebracht.Der Einbau ist etwas tricky, aber ohne allzu großen Zeitaufwand gut machbar. Eine bebilderte Anleitung gibt es auf der Cablemod-Website.3 Tipps zum Einbau: Als erstes die mitgelieferten 45°-Kabel durch die Gehäuserückseite nach außen führen, damit erspart man sich später die Fummelei. Die Halterung zunächst ohne aufgesteckte Grafikkarte einbauen, dadurch lassen sich die Slots im Gehäuse besser "anvisieren" und man muss nicht blind herumstochern. Dann das/ die HDMI-/ DisplayPort-Kabel bereits in die Grafikkarte stecken und diese erst danach auf die GPU-Halterung aufstecken. Auch das erspart unnötige Fummelei.Abschließend lässt sich sagen, dass der Vorteil dieses Produkts darin liegt, dass die Grafikkarte nicht wie beim vertikalen Gehäuseslot (falls vorhanden) direkt an der Glasscheibe klebt, sondern weiter mittig verlagert ist und somit eine bessere Luftzirkulation stattfinden kann. Nach dem Einbau liegt meine GPU-Temperatur im Schnitt nur ca. 2-3°C höher als vor dem Einbau. Im Benchmark lässt sich kein relevanter Leistungsunterschied erkennen. Ruckler im Spiel habe ich noch nicht erlebt, falls sich dies ändert, passe ich die Rezension an.

Se volete montare una scheda video in verticale e non farla surriscaldare questo kit di Cablemod fa per voi. Zero perdita di prestazioni, sostiene la scheda video, sta drittissima.