DeLonghi Steam Valve

fit my delonghi magnifica perfectly and works great now- also changed brew o rings. better price, service and delivery than a previous parts supplier.

Fits my Delongji Magnifica ESAM3300 perfectly. I have several of these workhorse machines and the steam wand is used for every drink. Eventually the seals wear out and liquid drips from the valve during startup or brewing. This is a low cost replacement with an OEM-equivalent quality that I’ve used for hundreds of drinks so far. Installation is easy and requires removing the rear and side panels. Pay attention to the order in which the front panel screws are attached to save time reassembling. You’ll need a pair of needle nose pliers to remove the positive & negative leads (note the positions of your existing valve and staples retaining the hose. IMPORTANT: You’ll need to remove the o-ring from your existing steam wand and use it with the replacement. It it seems stuck, carefully use a needle to loosen and remove. This repair shouldn’t take longer than 10 minutes, but while the machine is open I recommend checking for any leaks which may indicate an o-ring replacement is needed. Don’t forget to lubricate the infuser and if you haven’t done so, you may wish to replace the orange high pressure o-rings in the brew unit as well as the generator. Easy to do and restores pressure to the machine.

My DeLonghi Magnifica steam valve developed an annoying slow drip. My wife “demanded” I fix it. The replacement valve arrived quickly and looked like an high quality piece identical to the old one. It was a fairly easy job using a Philips screw driver and a pair of tweezers to pull the “hairpin” retaining clip for the water hose from the old valve. Happy wife….. TIP: Work on a table covered with a white sheet. That hairpin clip will fly off with surprising speed and you will spend more time looking for it than doing the entire job! Don’t ask me how I know. A thin coating of food grade silicone on the O rings will make them go back into the new valve effortlessly and prevent any damage to them.

Forgot to get the o-ring out of the old one. Water all over the plave when I started it up. Pulled the side pannels and front panel again. Retrived the o-ring from the old one. I gently fished it out with a toothpick. Very concerned that I might damage it and the machine would be down until I got a replacement. Put it on the hose reattached to hose and clipped it in place. Once I buttoned up the machine and pushed to start button. No leak! If I had to do it over again I would get a new o-ring and steam knob and replace them all together. Glad I didn't have to send it off to fix.

Perfect fitting replacement for my leaking steam wand. Installation was easy, until I turned on the machine and water leaked everywhere. Disassembled again and figured out that there was an O-ring missing where the water tube connects to the wand. I had already tossed the shipping package so I am not sure if it was not supplied or if it fell out of the spare steam valve assembly during transport, consequently I will not deduct points for this. I reused the old O-ring and everything worked fine afterwards. It's a fairly quick and easy repair and you can find a youtube video online on how to do it.

Cured the leak from my steam wand while the coffee maker was brewing. Very simple to install (took me 10 minutes without instructions). Be sure to save/move over the water supply O-ring from your old steam wand.

The unit works great until it decides to activate itself without the nob being turned. When this happens, the pump and the heating element is activated....since the nob is not turned, it will not let the steam out and creates pressure. The first time this happened, it created a ton o pressure and the steam blew out super hard. I’m glad I was around, this could of been very dangerous. Amazon is sending me a replacement and hopefully this won’t happen again.

Better price than other replacements websites. Fit perfectly and was easy to install

Part was a perfect replacement for my old faulty Tap. It arrived in a decent time and was much cheaper than ordering it elsewhere. Installed and so far 0 problems. Would recommend to anyone that needs it.

Perfetto per la DeLonghi EAM 4000b

メーカーに聞いてもありませんの一言で片づけられたので色々探しでこれに行きつきました。 交換時の注意点は上部のホースの入口の部分にOリングを入れないと漏れます。 スチームも正常になり水漏れもしなくなりました

Prima Ersatz für den undichten Dampfhahn an meiner Lieblingskaffeemaschine von Delonghi

Appears to be a genuine part, easy replacement. One inner o-ring needs to be removed from the old unit.