Swivel Bases for BO-5 Detachable Swivels, Black

Saw another review saying the machine screw worked perfectly on the Benelli Lupo. That review was correct. The machine screw threaded perfectly into the existing plug hole on the forend of my 6.5 Creedmoor. The knurled nut made the stud stick out too far, so I attached the swivel stud using just a single washer. My Harris bipod attached firmly and there were no issues at the range. Looked a little cheap on arrival but it’s very sturdy and looks like a factory piece once installed.

I bought this for my Benelli LUPO 270 rifle thinking I might need the extra spacers even though I really only wanted the front machine screw stud. As it turns out, it worked perfectly without using the extra spacers so now not only do I have the perfect front swivel stud for my rifle but I also have a complete set of wood stock swivel studs should I need them in the future. You might save a couple dollars just buying the machine screw stud if that is all you need, but this is a great option too if you want a little more for you money.

Bought this to install a bipod on a Marlin 60 stainless, and worked great. Was a little worried drilling holes into my stock, was a little worried the wood wouldn't be thick enough, was worried it's crack my stock, was worried I'd install it crooked, but it was actually really simple and turned out great. Just take your time do it carefully and correctly and you'll be fine.

I used the wide thread pattern screw for my Remington 783 after I drilled out the synthetic stock. I planned to use the machine thread swivel but at the location I set for my swivel and UTG Bipod, but there was an extruded hole in the stock perfectly lined up and sized for this screw thread pattern. At first I assumed the other screws were only for wood stocks but they work well in my synthetic stock and didn't loosen once the Bipod was installed. Pull the action out of the stock, drill, reinstall action, screw in swivel with screw driver, and done.

They work as intended at a good price. What else can I say.

so far so good. I needed this for my Savage FCPK-10 as it arrived (bought it used) without any mounting screw or sling attachment. I couldnt find anything anywhere that had a machine screw with a long enough threaded portion to work in my stock Savage stock. This came in a set of 3, and I only needed the machine screw. I applied some loc-tite and then mounted my Harris Bi-pod. So far the thing is holding solid and even let me hit a .25" group at 100 yards. Still holding strong after multiple trips to the range.

Pretty simple. Worked as they should. Parts were as described

Installed these on my Marlin 795 because the plastic molded sling stud broke off when I over tighten my bippod. I just drilled a hole and use the machined screw with a lock nut, I applied blue Loctite for good measure and put a little bit of JB Weld. It's already sturdy enough with out the Loctite.

This kit was easy to install on my Winchester 12 gauge shotgun with a wood stock. I drilled a hole in the magazine cap to install the front swivel and of course I drilled the stock for the rear swivel. Lots of videos on YouTube for advice. Now I have a sling on my shotgun. Inexpensive too.

fusil

Just what I expected ,perfect