KCHiLiTES 452 Apollo Pro 5"" 55w Fog Light with Integrated Stone Guard - Pair Pack System, white light output

I placed the 5" spot beam at the a-pilar and 5" fog beam at the bull bar. The wiring is fairly simple minus the "running wire" part. All light sets come with harnesses, relays, switches. You can even have your set-up running two sets of lights (4 lights total) to one switch. See the KC website. That is what I did for the top 4 lights (see photo). I connected all lights to a auxiliary fuse box so I did not have to deal with the additional relays and finding a location under the JK hood. For switches, I am running Daystar switches and using the Daystar panel. Granted, these lights are not the brightest on the market like some LEDs, but they are more than bright enough for me due to my overall set up. I wanted to get away from LEDs seeking the traditional look of the round KC lights as opposed to cube and light bars I am also running KC headlights. So in terms of look in addition to functionality, I am very much satisfied with all my KC lights including these 5" Apollo lights.

I debated on the 5" or 6" lights for my 75th JK, but went with the 5" to leave room for a winch. Installation was easy, but I took my time to make sure everything was neat and clean. Having said that, I did also purchase the Rough Country MLC-6 switch pod on Amazon, which meant I didn't have to use the full wiring harness. Highly recommend buying it, especially if you'll have multiple lights/accessories. I won't go into a review of the switch pod, as I've already done it on that page. For the lights, I did cover all wiring in plastic loom to make it look cleaner and add protection. The wires running from the bumper to lights are visible, so the loom gave it a much more professional look. I attached the lights to the bottom of my RealWheels pre-runner bar (also purchased on Amazon at the same time) and it was easy to remove the rock guards and turn them upside down. Just be careful not to drop the lens!We had a chance to use these in a recent snow and they performed great. These lights look great and I love the KC logoed rock guards in white! Only time will tell how they hold up, but I'll update my review if something changes. Planning to purchase more for the pillar and would definitely recommend as an easy and inexpensive way to accessorize your Jeep or truck!

I've only recently been learning how to (properly) wire lights and accessories to a vehicle. Given my experience level and the two modifications I made, I think anyone could figure this out. Comes with harness and diagram. There are plenty of Youtube videos to reference as well.I prefer the feel and durability of a standard toggle switch. I also don't care about having the button light up. So I used that instead of the switch that came with it. I just took out one of the four plastic pieces that reserve space for future rocker switches or rear defrost and wiper buttons and drilled a hole directly in the middle of it. There was some very thin plastic on the inside that I had to cut out with pliers and wire cutters. It made no difference to the structural integrity of said plastic piece. I used a 3M 3/8" toggle switch (20 amp) that can be found at some Walmarts. The switch fit perfectly.The second mod I made was moving the connector for each light. The connectors are only around 5 or 6 inches from the lights which means if you use them as windshield lights like I have, they stand out. The connection is sealed well from the weather but I thought it looked tacky. So I cut between the light and connector and added enough wire to hide the connectors under the hood (for each light). Then for the outside wire I couldn't hide, I used Flexible Polyethylene Wire Loom to give them a more professional look and to help protect them from the elements (see pics).Installation is pretty straight forward. Next, I plan to replace my stock fog lights with 6" Hilites. I'm very satisfied. It would be convenient if the wires connected directly into the light but then again it leaves a little room for some customization.

I love these! Perfect fit for my 01 Honda Crv. The wire harness worked great. Instructions are easy to understand. I had no issues with installation. Everything included appears to be good quality. The lights themselves are pretty bright for being halogen. I do wish the beam spread out a bit more, but I'm sure I can compensate by adjusting them more outward. Overall, great lights if you want that old school halogen look.

I installed these on my wife's Jeep Liberty. I needed a fog beam pattern to enhance her night driving in inclimate weather as well as any other time. I chose KC because they were the only style fog light I could find that came with stone covers as well as lights which were 5". My wife did not want any big gaudy lights so the 5" size was perfect. Unboxing these lights, they looked amazing. Great quality, made in USA, and everything needed was included. Installing these lights was a snap, the instructions and installation was exactaly like the PIAA lights I have on my Jeep so it made it really simple. For looks, quality and installation this product is an easy 5 stars. Once the sun set, I hit the road and tried out the new lights. The lights were significanly "yellower" than the stock, 6 year old headlights on her Jeep. I was astounded because when I first put my PIAA lights on I was blown away by the white brilliance of them, I understand these are a much different light (and price range) but I never expected them to be so dull. The side to side pattern on these fogs are not as wide as i'd expected, my PIAAs have a steady stream of light with no interuptions where as these KC lights have noticable interuptions in the beam pattern. I dont know what that's called but its annoying. Whatever, I won't complain any further because these lights look amazing on her Jeep and they are not the worst, they still do a great job filling in the gap that the headlights dont cover, even if they are dimmer they still help more than nothing.

Just as advertised and easy to install. Everything provided and they work great as KC lights are famous for.

Replaced bumpers on my JK and needed new fog lights. Thought I would try these since they're the same watts as the factory fog lights. WOW wasn't disappointed, nice low beam for about 500 feet and about 30% wider beam than the factory lights! Great for the trails at night! KC kit comes with everything you need to wire these lights up, and I mean everything! Nice! Quick shipping from Amazon!

Work great. Didnt know they came with all the wiring and switches and fuses you would need to hookup so that was a bonus

Thanks!

Great lights, easy to set up and came with everything i need to install. 55W isn't as bright as the other lights available, but just fine for a fog light.The bracket they came with installed easy enough but the flat bracket might be a problem depending on where you choose to install them (on a bullbar or lightbar for example. Its secure but wont be very "flush".).Follow the instructions to aim them for the best results.