DiDiSky Under Cabinet Lights, 13 Inch Motion Sensor Lights, 56 LED Battery Operated Lights (7000K), Under Counter Lights for Kitchen, Cabinet, Closet

Saw a similar light at a friends house being used in a pantry, found this brand and got a two pack, and these lights are great, use one for some stairs/ hallway, the other as a rooms nightlight, these have day/night sensor settings that work perfectly (Left on night mode the sensor doesn’t let the light come on in daylight, saving a lot of wasted power), the movement sensors work great and have a wide range. Its got several brightness levels and usb-c charging(charge these once a week, and they are coming on many times each daily, never had either battery die, I just charge it to top it off and make sure they won’t, and they charge quickly, can’t give an exact time because it varies and I have no idea how depleted they are before I charge them. I’ve had them for almost a full year, still going as strong as when the first time I used them They come with two adhesive metal strips and have the magnets built into them, hold them well. I would like it if they made a squared edge version instead of the rounded edge it has so that I could just stand them on a countertop or any flat surface, that’s only a thought and doesn’t take away from the fact that these are excellent portable automatic lights for anywhere you need them. Recommended

My microwave is above the stove and the light is blown. I have been searching for a replacement for two months. Any way I found this light on Amazon for a great price. I like the ease of installation and it also has multiple setting. You can set it to come on for motion detection or set it to stay on until turned off. It also has a couple more settings. Really brightens things up so you can see while cooking. Great battery life. Very low profile and looks nice. It is not bulky and doesn’t stand out. Last but not least. The charging cord is very very very short! But the fact it’s mounted by magnets is truly a game changer. Simply grab the light and charge.

These little lights are awesome. They are well made, easy to install, easy to charge, and run for weeks on a single charge. I have them set to their lowest setting, and have them activate with their little motion sensor. They turn on when you walk into an area, and turn off on their own when you leave or they don't sense any motion. I find them great as night lights, or in places you would appreciate a little automatic no touch light that comes on without you asking or looking for a switch. Under a sink, in a cabinet, under a shelf, or wherever. They are kind of magical, and well worth their price. Pick up one set, and I guarantee you'll order another. NOTE: These are a cool light. You can vary the brightness, but not the color temp. If you are looking for some light with a warmer color, check out their other model.

I love these. They do charge slowly (couple hours) but the battery life is pretty long. I've had them a week and haven't had to recharge them yet. They have 4 light settings so you can decide how bright you want them. I love how they fade on/off gently. The motion detection is pretty sensitive but not so much that a fly will set it off, for instance. I also like that you can charge both at once. I only wish it was a 3 pack instead of a 2 pack. (I bought 2 sets because I needed 3 lights.) I purchased the 13 inch. I also wish there was a setting to adjust how long the light stayed on because it only stays on about 5-10 seconds. Otherwise, great, simple under cabinet lighting solution!

Update 20Feb2025: The light lasted almost 6 months before dying (completely dead) on the first complete charge for my application. Not bad. Everything is still well stuck, nothing has fallen off. I have since mounted one each of these in a couple of Ikea PAX wardrobe cabinets and they work great in that application to provide just enough to see what is going on in a dark or dim environment in our bedroom. Product purchased was the 13-inch, white, two pack. I would definitely buy these again if needed. I was surprised, when I measured this light, that it exceeds its specs. It is pretty rare, in my experience, with battery operated products to do so on Amazon. I fully charged one light. Then let it run at its brightest setting until it died. It lasted a total of 11 hours and 6 minutes. Then I charged it to full from that state. It took 5 hours and 6 minutes. Total capacity to charge was 3325mAh. I'd say that for the first 9 hours or so it was at the full bright setting and at about the 9 hour mark it dimmed to about the 50% setting (still very usable in my corner cabinet use case) for the last two hours before shutting down completely. When the light is activated by motion, it stays on for about 20 seconds. It stays on longer if motion keeps triggering it until the motion stops. The light measures 13 1/16 inches long and 1 3/4 inches wide and using the sticky magnetic plates for mounting, the total thickness is 1/2 inch (about 7/16 inches without the metal plate). The two metal plates that you stick to your surface are 2 5/16 by 1 inches. There is pretty small hole in the metal plate that you could theoretically use to mount with a screw but the metal is pretty thin and the hole is only 1/6 inch wide but could be very easily drilled out wider if needed. Since it is so thin, you would definitely need a flat head screw to try and get the screw head flush with the plate. You could always use a similar or smaller sized plate of your own making as well. The plate is not a magnet, just magnetic. The magnets are within the light spaced about 9.5 inches apart, so you can stick these on magnetic surfaces which opens up all kinds of other applications for these). A couple of flat head screw heads or washers were all it took to support the light's weight horizontally, but they would not do so vertically as the light's back surface is metal (aluminum it seems) and so it slides off the screw heads in that position. I've mounted one each of these vertically in two corner cabinets. So far everything is staying stuck pretty well. Will report back if/when they fall off/unstick. Photos show a USB meter while charging (red light) and when fully charged (green light). The motion sensor bubble lights red while charging and green when complete. Two other phots show the inside of the cabinet during daytime, one with light off and the other with light on. I adjusted the photos' brightness to match what I see with my eyes, to give a realistic representation of before and after brightness levels. Light is mounted vertically on the right wall as shown in last photo (not adjusted for perceived brightness). One 8 inch USB-A to USB-C cable is included that has two USB-C connectors so you could charge two lights at a time. No power adapter is supplied. There are four switch settings: On (always on), Off (always off), Moon Symbol (only motion activates in dark environments) and a Sun symbol (motion activation active even in iight environments). Another button controls brightness levels a quick press cycles to the next brightness level. Brightness levels are stated as 100%, 75% and 50%. There is a fourth level that seems to be a duplication of the 50% level. Not sure what that is supposed to be. I could not get the Night mode to work. Even when shining a bright LED flashlight at the motion sensor, it still motion activated, duplicating the behavior of the Daylight setting (which is what I use in my cabinets). All 4 of my lights behaved the same way, so I doubt this is just a defect. You can also set the light brightness by pressing and holding the brightness button and releasing at the desired brightness level from 10% to 100%. The light will remember your brightness setting.