Carpuride W502B Pro for B.M W Motorcycle CarPlay & Android Auto & Dual Bluetooth, 5" Waterproof GPS Navigation Screen for Motorbike, Music Sharing, Intercom, EQ, Light Sensor, Compass, Barometer

I have a 2019 R1250RT, which is the generation before the TFT and runs the removable Navigator VI that mounts in the center dash. I bought the BMW-specific 5in Carpuride with the thought of using it in place of the Navigator VI. The Carpuride BMW adapter mount clicks into the dash receptacle and gets power, just like the Navi VI. So as a replacement for the Navi, it works great. But it turns out I like the data displayed on the Navi VI and the ability to control it from the wonder wheel. So I am keeping the Navi VI and instead have mounted the Carpuride on the handlebars with a ball mount. They ship the Carpuride with hardware for a RAM type mount which I used, although the awesome Tackform ball that I already had is 20mm, so you need an adapter. The USB plug inside the right dash cubby won't power the Carpuride but it works great getting power from the 12v power point on the right fairing with a USB-A adapter.The Carpuride is easily visible in sunlight, the image quality is clear, and it connects reliably to my iPhone, even if the phone is in the panniers. The screen responds to gloves and overall, it works no-brainer like the Apple CarPlay in my cars. I thought about the 7in but the 5in is plenty big enough.

I have a ‘16 GSA with the factory nav mount. You can just mount the Carpuride onto the factory mount (it clips in with nothing else), but I questioned if it would stay on for rough roads..An easy solution - almost as if they intended this (but it’s not in the manual that I found and the screws they included were too short)..There are 4 screw holes on the Carpuride that align perfectly at least with my ‘16 GS’ factory holes around the nav. The problem is those BMW screws, even if turned around, are too short AND the wrong thread size. Carpuride came with 4 screws of the right diameter but 1) they won’t fit through the bmw nav holes and 2) they’d be too short. Easy solution:1) Get 4 new screws of the photographed size (5mmx40mm 0.8 pitch thread).2) Drill the plastic holes in the 2 OEM GPS mount pieces just a bit larger so the new screws will slide through. This is plastic so easily drilled. On the larger piece drill from the rear as the front has these little inset metal pieces (they’ll come out once drilled).3) Then assemble again, I’d advise a little blue locktite on the threads since it’s a motorcycle and will vibrate (and that will keep the screws from coming loose). Now it’s both bolted to the bike so it can’t fall off - and it’s also in the GPS cradle and locked with your key. So there’s a little theft deterrence too if someone unscrewed those 4 screws.4) On my year (‘16) GS I found the bars (brake reservoir) would bump the nav at full lock. To prevent, I simply cut the 2 factory zip ties on the wire to leave more slack, then I could slide the entire mount assembly an inch or two further to the left (and more centered) which allowed clearance on both sides at full lock. Tighten your 4 screws and you’re good to go.And the GPS is great - super easy to use, just sync to your phone in seconds and it’s ready with all the normal CarPlay functionality. I also connected a Cardo headset so I could hear things.Highly recommended!

Its a good size screen and it works as I expected, so far so good

Fairly well packed. Unit is quite pretty and feels solid. Install and connection to my phone was a cinch. I only have two complaints:1)The instructions should be larger and more comprehensive, especially regarding the mounting.2) A lot more care should be given to the included hardware, especially screw lengths as most are longer than they need to be.

Llevo probándolo 15 días y hasta ahora muy bien, el control es inútil, es más fácil manipular directamente en la pantalla.

Exactly what I wanted it to be. Works flawlessly. I took it on a 1500 mile, mostly off road trip so it got a real test. I used Google maps and OnX off-road to navigate. I also used it to control Spotify and phone calls to my Bluetooth which has always been problematic. This thing works great and the price is right. Best part is never have to deal with Garmins terrible interface again!

Excelente calidad drl producto. Envío a tiempo.

Installed this on my KLR650. Works well and syncs up perfectly with my S23+ Galaxy. About to do a BDR so this will come in very handy and will be using Gaia with it.