

🔌 Power your passion nonstop with the ultimate camera lifeline!
The DMW-DCC8 DC Coupler is a fully decoded dual USB power adapter designed for Panasonic Lumix cameras, providing stable 7.2V-8.4V output via USB input (5V, 2A-4A). Featuring built-in safety IC chips, it ensures protection from overcharging and overheating. Compatible with multiple Lumix models, it enables extended shooting sessions powered by portable power banks, making it an essential tool for professionals seeking uninterrupted performance.
| ASIN | B07C17ZFNX |
| Best Sellers Rank | 526 in Camera Battery & Charger Adapters |
| Guaranteed software updates until | unknown |
| Item model number | JYC-DCC80-D |
| Manufacturer | Hincore |
| Product Dimensions | 10 x 16 x 1.3 cm; 60 g |
C**G
An ideal external powering companion for your NP-FW50 powered camera!!
These leads proved to be ideal for my Sony a6500 and can't fault them which are ideal for being powered by the aid of a suitable external 30,000ah portable power bank! Suffice to say that the AC-PW20 Dual USB Power Kit connected with a NP-FW50 DC Coupler Dummy Battery proved to be ideal for my Sony a6500 or indeed any camera that requires a NP-PW50 DC battery whether that is the Sony A6000 range or the A5000 or the NEX-3 series such as the NEX-5N/5R/5C/5T series & NEX-6 & 7 series, A33,DSC-RX10 & mrk II respectively! So if like me and you feel that your camera is hungry on your NP-FW50 DC battery then this kit really is "a must have" so it really is a no brainer! Compatibility with a suitably rated portable power pack or is connected to a V-lock PSU and V-lock Battery (if your planning on building a much larger cinematic rig) then it's pretty much a case of plug and play really (proper rated voltage & current outlets accepted ofcourse). Soon you'll find that having to charge up your camera battery as often as you once did with limited operation times really will be a thing of the past with this kit! My personal recommendations to compliment this kit with your camera would be a compatibly sized camera cage with fitted handle with a 20-30,000ah portable power bank with power bank cradle holder firmly attached from a brand of your preference whether it's courtesy of SmallRig© or Neewer© etc then your pretty much all professionally set basically! The AC-PW20 Dual USB Power Kit really is "a must have" and is sold from a reputedly very good Amazon seller that one could not fault! Kind regards and remember to stay safe during these exceedingly very difficult times that we are all experiencing right now! Craig 👍
A**.
Works perfectly! Extends the battery life on my A6300 brilliantly.
Just purchased this for my Sony A6300 for use connected to my Anker/Aukey powerbanks. Having done the continuous record limit removal on the A6300 I have been testing the camera recording 4k 25fps and it's been running solidly now for 45 minutes uninterrupted and still according to the camera has 85%. Previous tests with normal NP-FW50 Sony batteries have overheated the camera at around the 30 minute mark. Edit: Have reached the 47 minute mark and the overheating warning sign has appeared but is still filming. Edit 2: Has reached over an hour of filming without overheating - onscreen battery reading at 82%. Removed the dummy battery and put back in the same dummy battery and turned back on the camera - reading of 94% and no heat warning sign. Very impressed. My power bank still shows four full LEDs so I presume this could power for a lot longer time than the predicted on screen percentage on the camera. The product itself seems well constructed, has a solid cable and connector and the dummy battery you insert itself seems of good quality. Instructions are simple and printed on a sheet of A4 but pretty self explanatory. Note: You will need an external battery or power source that delivers over 2A of power. My Aukey 20,000mah deliver 2.4 and is working great.
L**M
Does the job
Using this for my EOS 4000D, it's definitely not made for this since you need to keep the battery door open but it does work. Item feels a little bit cheap but after using it for 4 or so months letting me use my camera as a webcam (quite infrequently) it has been worth every penny. It used to be a hassle changing the battery after every call but this has been performing nearly flawlessly. The only real issue i've had is it needed to be unplugged and plugged back in a few times because the camera wasn't powering on - pretty rare issue though for me.
H**J
Works perfectly with the Sony A5100 hooked up as a desktop webcam
I purchased the single-port version of this product, and so far it has been working flawlessly with my Sony A5100, which I use as a webcam. Truly a simple plug-and-play solution for keeping the A5100 charged during long video calls. No charging failure or overheating issues noted as of yet, even during lengthy conferences. Highly recommended for anyone with a similar mirrorless/DSLR webcam setup. The included cable is also very long, which is fantastic for those who need a bit of slack. This has been particularly useful for my desk's (somewhat convoluted) cable management setup, keeping things tidy and tucked away. However, it is definitely worth noting that this product should NOT be plugged into a power source that outputs a voltage exceeding 5V, as over time this may cause damage to the product. Ideally you would use a power bank or wall charger/adaptor with an output of 5V 2.4A or 5V 3.0A. Mine is plugged into a 5V 2.4A USB output port on a 65W multi-port power delivery hub. Please double check the output of whichever power source you intend on using. Aside from that small warning, this product is a very simple and effective solution for compatible cameras, at a very affordable price. Highly recommended.
S**Y
Works amazing with my Lumix G7, combined with an Anker powercore 24K, just finished a 5 hour stream and lost about 30% battery with the screen on, HDMI captured to PC, no recording.
G**E
Un prodotto da un fantastico rapporto qualità/prezzo, io l’ho preso perché dovevo utiiizzare la mia Canon 4000D come una webcam collegata direttamente al pc. Il suo lavoro lo fa egregiamente questo prodotto e devo dire che scalda anche poco nonostante le tante ore che sta acceso il prodotto. All’inizio ero perplesso sul suo acquisto perché leggevo di persone che hanno dovuto modificare la macchinetta 4000d per far passare questo filo dato che la macchinetta non presenta nessun foro però ho risolto almeno io semplicemente spezzando uno stuzzicadenti e inserendolo nel relè come da foto , in modo che si creasse il contatto per tenerla accesa. Quindi confermo che per la 4000d è compatibile ma dovevo fare qualche trucchetto per farla funzionare.
F**.
Uso più flessibile dell'originale Canon, provvisto di innalzatore di tensione da 5v a 8,5V per uso con powerbank e alimentatori USB da 2A. Avendo un alimentatore stabilizzato e protetto (!) a 8V si può alimentare direttamente la camera usando solo la prima parte.
J**A
Perfecto funcionamiento. Conectado a un cargador de móvil también, por lo que para trabajos estáticos sirve para olvidarte de que se te agote la batería a medio trabajo
C**N
identique à la description de vente, marche parfaitement
Trustpilot
2 weeks ago
4 days ago