Front Bumper Lip Splitter 6pc Universal Canard Fins Black

Decent. Very brittle though Fits the car spot on

Look good and easy to fit but I have lost two already due the tape being not as sticky as it should be.

price @ review: £7.99 - good price Option chosen: Universal 6 pcs black Product Experience: GEARCELL 6pcs Front Bumper Lip Fin Bumper has been a useful and worth it purchase. This product is a universal car front bumper lip splitter designed to enhance both aesthetics and aerodynamics. Crafted from high-grade ABS material, it boasts impressive durability and resistance to environmental factors. The splitter's primary function is to manipulate airflow dynamics, effectively reducing air resistance by minimizing the amount of air entering the undercarriage from the sides. The implementation of this splitter can lead to a noticeable improvement in vehicle stability, particularly at higher velocities. By creating a more favorable pressure differential between the upper and lower surfaces of the vehicle, it generates additional downforce on the front axle. This increased downforce translates to enhanced traction and cornering capabilities, especially beneficial during high-speed maneuvers or track days. From a structural standpoint, the GEARCELL splitter utilizes a soft rubber composition that offers multifaceted benefits. Beyond its glossy appearance, the material exhibits exceptional anti-aging properties and wear resistance. This composition not only serves to protect the vehicle's paint from minor impacts and abrasions but also contributes to the overall aesthetic appeal of the front fascia. The product's design allows for seamless integration with various vehicle models, requiring no modifications or trimming for fitment. Pros / Cons Potential likes for this product include its universal fitment, which broadens its appeal across different vehicle makes and models. The ease of installation, facilitated by pre-applied adhesive, is another significant advantage. Users may appreciate the dual functionality of aerodynamic enhancement and cosmetic improvement. The durable ABS construction and rubber composition suggest a product that can withstand daily driving conditions without degradation. Advice about the product: On the flip side, dislikes might stem from the potential for improper installation leading to reduced effectiveness or premature detachment. Some users may find the aesthetics too aggressive for their taste, particularly on more conservative vehicle designs. There's also the consideration that while universal, the fit may not be as precise as model-specific alternatives. If I was to advise on the purchase of the product then it would be to carefully assess your vehicle's specific needs and aesthetic preferences. Ensure proper surface preparation before installation to maximize adhesion. Consider professional installation if you're unsure about the process. For performance enthusiasts, this product can be a cost-effective way to improve front-end downforce, but manage expectations regarding significant performance gains on street-driven vehicles.

6pcs Front Bumper Lip Fin Bumper, Universal Car Front Bumper Lip Splitter for Car Body Auto Anti-Collision Strip, Decoration Front Bumper Side Canards Splitter Fins Black @ £7.99 These are obviously made from plastic, but not a bad brittle plastic from what I can see. Look/feel/finish, seems all ok There is a small strip of adhesive tape on the back of each mini splitter which makes them easy to install, just make sure the vehicle is clean and dry before you try and stick these on. When fitting it is best that the ABS (plastic) is not cold so keep these inside at this time of year (December) for a day before fitting and ideally the bumper you are fitting them to is also warm so use a hairdryer to bring the temp up so it is warm, but not hot to touch. Doing this will prevent the ABS from cracking and also maximise the adhesiveness. As I have seen this type of modification to my car before I knew it was going to look ok and possible have some improvement over the airflow around the lower front bumper. Price seems reasonable. Hope that helps

These trims not only look awsome {ok ime a secret boy racer ye i wished haha } but they are also functional i have a tvr 7 and the turbo inlet is just behind the bumper and was forever getting too hot and we where advised by our mechanic to get these splitter fins and wow what a difference My turbo runs cooler and has actually increased power by 1.6 bar just by deflecting the air from the front bumper to the trailing edge off the sheel arch They are supper easy to fit and it must be 3M double sided tape because once its on its on i would STRONGLY ADVISE using masking tape to mark out the positions then there cant be any misshapps So all in all even taking aside the functional side off things they also look the Mutts VERY HIGHLY RECOMENDED TOP TIP IF THEY DONT FOLLOW THE PROFILE OFF THE BUMPER 100 PERCENT SIMPLY WARM THEM UP WITH A HOT AIR GUN YOU DONT NEED MUCH HEAT AND PLACE THEM RIGHT ON THE BUMPER AND HOLD FOR A FEW SECONDS TO COOL IT DOESNT EFFECT THE ADHESIVE AND THEY HOLD THERE SHAPE

The GEARCELL 6pcs Front Bumper Lip Fin Bumper is a fantastic addition for enhancing both the protection and aesthetic appeal of my car. Once fitted correctly, these bumper lip fins provide excellent scratch protection for vulnerable areas, giving me peace of mind in tight parking spots and during daily drives. Installation was relatively simple, and the universal design made it easy to align and attach them securely to my car’s bumper. The fins stay firmly in place even after long trips and exposure to varying weather conditions. Not only are these fins functional, but they also add a sporty and sleek look to my car’s front end. The durable material feels robust and doesn’t easily scratch or fade, maintaining its appearance over time. For anyone looking for a stylish way to protect their car from minor bumps and scratches while adding a custom touch, this is a highly recommended product. It’s affordable, practical, and makes your car stand out!

the tape barely holds them in place, and the fact that they are so rigid means that unless your bumper matches the curve of the canard exactly, or your using screws to hold it in place, it will fall down really soon

I recently tried out these to give my car a little style boost and added protection, and my experience with them was a bit mixed. To start, these splitters do fit pretty well. The “universal” fit seems accurate, as I didn’t need to trim or modify them at all. It was nice not to have to fuss with cutting anything down, and they actually fit the curves of my bumper decently. Once I had them installed, I’ll admit they looked pretty good and did add a slightly aggressive look to my car’s front bumper, which was exactly the vibe I was hoping for. However, the material was a bit of a letdown. They’re made of rubber instead of a more durable plastic, so while they’re lightweight, they feel kind of flimsy. The rubber bends easily, and I worry that it won’t hold up as well over time, especially when exposed to the elements. Another downside is that they were a lot smaller than they seemed in the pictures, so if you’re expecting a bold, standout look, you might be disappointed. They’re more subtle than the photos suggest. The biggest issue I had was with the adhesive. The double-sided tape included with the splitters wasn’t nearly as sticky as I expected. After cleaning and prepping the bumper, I still struggled to get them to stay on firmly. Eventually, I had to use some Gorilla tape to make them stick better, which worked but was an extra step I wasn’t expecting. I’d definitely recommend getting some stronger adhesive if you decide to go with these. In the end, these bumper lip splitters are fine if you’re just looking for a quick and affordable way to update your car’s look. They’re an inexpensive way to add a little flair, but if you’re looking for something durable and high-quality, you might want to invest in a different product. From a distance, they look pretty good, but up close, the issues with material and adhesive are more obvious.