TECBEARS PLA+ Filament 1.75 mm, Upgrade Pla+ 2.0 More Robust and Stronger 3D Printer Filament 1kg Spool, Max 300 mm/s Printing Speed, Dimensional Accuracy +/- 0.02 mm, PLA+ Black

Nice clean white filament.No adhesion issues over the filament I normally use.The filament seemed reasonably consistent and I didn't come across any winding snags so far.End result prints look nice.Came with resealable bag for storage to help keep it dry which was nice.

Although I can see some benefits, I have yet to be convinced of the need for PLA or PLA+ filaments. On my K1 I normally print with PETG, finding it easier to use and that it produces a more stable, durable, 3D print. I normally print with a filament dryer but as this is a freshly opened spool, no dryer was used.Under Vine I was recently offered this TECBEARS PLA+ 2.0 Black filament. Based around appearance, performance and price, have I changed my mind? In a word, yes (but with a caveat).This black PLA+ 2.0 filament is well packed and supplied on a plastic spool. Personally, I prefer a plastic spool as it runs freer in the dryer than a cardboard spool. I like that two suggested printing temperatures are printed on the spool (for print speed ranges) and that a plethora of information is included on the box. However, strangely, the print temperatures are not included on the box.Out of the box, the black filament is as you would expect. Unlike most PLA filaments, the raw filament does not feel brittle (and is actually very resistant to breaking) but it does discolour if you bend it.In use, I initially used a Creality Print stock CR PLA+ profile and had no issues whatsoever. The parts printed cleanly, uniformly and flat.The image is of the part I produced. It is called ‘Nautilus Gears’ and was downloaded from Thingiverse. I was very pleased with the overall appearance. The 0.16mm layer lines are uniform and virtually unnoticeable.Price wise, this filament is as cheap as chips. An absolute bargain, particularly given that this has the benefits of being + as well as 2.0.In summary, easy to use, produced a part that was dimensionally accurate and assembled easily. Very pleasant and uniform in appearance and extremely competitively priced.The caveat? This comes close, and I prefer this over all other black PLA’s, but I would still choose a Black PETG, hopefully sourced from TECBEARS.

This review is for TecBear’s White PLA Filament. I received this PLA from TecBear free of charge via Amazon Vine for my impartial reviewI print using a Sidewinder X1 printer with a 0.6mm volcano hot end. I typically use a temperature of 195c for PLA and a print speed of 60mm/s. As I print mainly functional parts quality is not my first priority and neither my printer or Cura profile are tuned to perfection but I think this helps good filaments stand out.TecBear’s filament comes on a plastic spool. This is ideal for me as my spools sit on rollers and the plastic spools minimise friction. The filament is vacuum packed in a bag that can be resealed thanks to its built-in zip lock function. I wish more filament manufacturers would use this method so that filaments can be preserved longer..`The filament is well wound upon the spool and the colour is a pure white. While not a matte colour, this PLA is one of the most matte of my ‘standard’ white PLA Benchy collection.On the box, the recommendation is for a nozzle temperature of 200c to 210c for standard PLA. I chose to use the lower end of 200c and I am aware my volcano hot end is very good at lower temp printing.The sample Benchy I produced in this review was one of the best I have ever produced. I am amazed to get this quality of result without further tuning or by using PLA+. Despite the 0.2mm layers, the hull barely shows any layer lines and the helm cabin had no stringing. I do not usually get such good results out of the box.In conclusion I am very pleased with the performance of this PLA on my printer, and on the thought taken in packaging. I would be happy to recommend this filament.

PROS-high quality filament, had no major issues while printing-uniform spool winding-intact vacuum packaging with silica gel included to ensure filament remained dry during transport-printed well between at between 200 and 220 degrees with no clogging issues with bed temp of 60 degrees on Ender 3 S1 Pro-came with resealable bag to allow for storage when not in use-PLA+ definitely results in higher quality results when printing at higher speed than standard PLA and also seems more durable and impact resistantCONS-plastic spool rather than cardboard doesn't allow for recycling-no filament remaining marks on printer either so you have to guess or weigh the spool-Some minor stringing issues indicating some moisture in spoolMY STAR RATINGS:1* substandard, mostly cons2** barely acceptable, cons outweigh the pros3*** meets the basic requirements, cons balance the pros4**** good product, pros outweigh the cons5***** exceptional, all (or almost all) pros

This is a great PLA+ filament, like other PLA+ you do have to increase the temps a little, but form there it is fine. Typically I use JAYO PLA+ and this stuff is nigh on identical.Perfectly wound, nice and tight, no issues with the unspooling when in use. The colour is perfectly white, uniform, and cannot be faulted. Especially for the cheap price it is going for. On par with the leading filaments to my eyes.Overall, excellent!

First time using PLA+ so it took a bit of fiddling to get my temps right. It runs hotter than standard. The results are great. The quality of the print is fantastic. I had 0 stringing issues once I had the temp right. The colour is a gorgeous deep black and nice and shiny. The smoothness of the print is really impressive too.Bonus is, it's really well priced.

🧵 Material PLA+ Mejorado: El filamento PLA+ 2.0 de TECBEARS ha sido diseñado para ser más resistente y duradero que el PLA estándar. Con una mayor robustez, este filamento es perfecto para proyectos de impresión 3D que requieren piezas más fuertes y fiables.⚡ Alta Velocidad de Impresión: Este filamento está optimizado para velocidades de impresión que van desde 0 hasta 300 mm/s, lo que permite realizar impresiones rápidas sin comprometer la calidad. Ideal para impresoras que soporten velocidades altas y trabajos urgentes.🎯 Alta Precisión: Con un diámetro constante de 1,75 mm y una tolerancia mínima, este filamento garantiza un flujo constante y sin atascos durante la impresión, asegurando una precisión excelente en los detalles de las piezas.🖤 Color Negro Intenso: El color negro del filamento es perfecto para obtener acabados elegantes y profesionales en tus proyectos de impresión. Las piezas impresas tendrán un aspecto limpio y atractivo, adecuado para aplicaciones funcionales y decorativas.🔧 Compatibilidad Universal: Este filamento es compatible con la mayoría de las impresoras 3D que utilizan tecnología FDM, incluyendo modelos populares como Creality, Anycubic, Prusa y más.🌱 Amigable con el Medio Ambiente: El PLA+ está hecho de recursos renovables y es biodegradable, lo que lo convierte en una opción más sostenible para tus proyectos de impresión.💡 Fácil de Usar: Gracias a su excelente adherencia a la cama de impresión y mínima deformación, es ideal tanto para principiantes como para usuarios experimentados en la impresión 3D. Además, no produce olores desagradables durante la impresión.En resumen, el Filamento PLA+ TECBEARS de 1,75 mm ofrece una solución mejorada y más resistente para proyectos de impresión 3D, con la capacidad de imprimir a altas velocidades sin comprometer la calidad ni la precisión.

First time buying this product made me skeptical. Printed a few small things to try out the plastic quality and build, no issues. Moved to bigger projects, and it proved to be durable, flexible as it says on the description.I now have a product I rely on and plan to buy for the future.

I bought two identical filaments on a page, the first one was red and had exactly the same properties as any other PLA, but the blue one is impossible to use, I can't print faster than 50mm/s, the filament is partially wet, and very often these are the parts where the melting temperature is higher than average, which causes an irregular volumetric speed.Don't buy it!!!

oby wiecej takich 💪

Ho comprato per provare il multicolore sulla mia nuova stampante BAMBULAB P1S; tutto ok e anche le impostazioni base (generic PLA) della mia stampante hanno funzionato con questo filamento PLA+ TECBEARS (che se non sbaglio è una "sottomarca" della SUNLU)