Spigen GlasTR EZ FIT Screen Protector for Pixel 10/10 Pro, Pixel 9/9 Pro

I think the last time I got tempered glass screen protectors was about 5 years/ 4 phones ago. I'm not prone to dropping phones, and the times I have dropped them, there were never any screen breakages. Plus, they were always a huge production to apply. I got these protectors because it looks like the installation technology has advanced - a LOT - since then. There's a hard plastic frame holding the glass that fits right over the phone. There is some adhesive stuff to remove (first on the part that goes onto the phone, then the part you rub for the backing). There are all kinds of extra accessories: Wet screen wipes, adhesive dust removal stickers, a foam squeegee (my past experience had next to useless hard plastic squegees). I supplied my own latex food handling gloves, just to make the whole experience feel almost surgical in nature (Nurse, sponge) and to keep my fingerprints off of anything (for aesthetics, there were no crimes being committed). I read the instructions for the novelty of it, but the whole system is so intuitive that you really shouldn't need to read them. Everything was completely in line with my expectations of what would need to be done. I'm not sure how (and this has to be completely on me), but despite my careful gloving, wipedown, application, rubbing the back and peeling, and lifting the frame, the first protector had bubbles with minute spots in the middle that the squeegee couldn't get rid of. The second one, I made sure I did the whole thing with a fan blowing gently over the work area. That one installed with no issue. Overall, installation was way, way easier than what I was used to. The main reason I recommend this to any Pixel 9 Pro XL user, whether prone to dropping screens or not, is the oleophobic quality. I've managed to get fingerprints on the glass. But a quick wipe on my sleeve, or my hip, and it's like I've never touched the screen. Prior phones (a couple of them Pixels), it was basically a chore clearing off fingerprints/ finger marks. That alone makes this worth it. I am not willing to drop my phone face down from any height to test its protection. However, for the sake of all of you, I used a sharp edge of a key along the very bottom and very top edges, pressing hard, to see if I could scratch the glass (I won't risk cracking the phone screen, but I'm fully willing to buy another set of screen protectors). The sharp key point skated around with no scratch-making sound. The glass had no scratches. So then, I used a box cutter. I dug the point in, hard, and went from side to side (as though I was opening a package), and a bit up and down (basically moving the point 'sideways' in relation). This time, I heard and felt vibration, as though scratches were being made. Nothing. Nothing to a finger rubbed over the area, nothing when I held the phone up to the light at an angle that would show scratches. As for touch sensitivity, I have never had a problem with it recognizing my thumbprint. Perhaps it's because I followed the often-repeated advice throughout the packaging, and took multiple thumbprints of the same angle (which I always have done anyway). But I added some index finger presses, like 2, and it reads my index finger just fine as well. I honestly don't see any downside to getting this kit. For me at least, the supidly easy to clean screen makes it completely worth it.

This was the first time in my experience that the screen protector installation was completely easy and flawless. Perfect screen alignment, with no sign of any air bubbles at all, at the very first attempt. The Spigen application procedure is a clear standout, well worth the slightly higher cost over some competing brands. I had no problems with fingerprint recognition either.

I was genuinely surprised by how simple and easy the application was, resulting in a perfect fit. I absolutely love that this is made specifically for the Pixel 10 Pro. Scanning the QR code in the settings to optimize the phone's touch sensitivity is a brilliant feature. I don't use a case, so I was concerned the edges would be noticeable or annoying, but they blend completely seamlessly. I forget it's even there. The fingerprint scanner worked fine right out of the box, but I decided to reinstall my fingerprints just to fix a tiny bit of sluggishness, and now it’s perfect. Highly recommended!

Easy to install. Provides supporting tray that customized for Pixel 9 series with the shape of camera bump at the back. The tray is made of dense form which provides good support and helps keep camera at even level with the screen protector installation frame provided. The included squeegee is a good quality one. It has soft tip than just one plastic piece. Nice. The included instruction is clear. It is not too small print and it is step by step illustrations. Putting the frame on phone is also easy. The alignment is good. The instruction indicates to press on to the slot in the middle back and forth. I also applied pressure evenly across the frame as well. You can see how the protector adheres to the screen to most parts (of course some ares of the screen are covered by stickers etc.). I think that helps eliminate bubbles afterward well. In my case, the first application came out 100% bubble free right away. I'll come to the reason for the second application in my case a little later. Peeling the back to sicker off the frame is also easy but I will be careful to pull it slowly and keep firm holding to the frame to the phone while pulling to prevent tearing off the pulling-sticker. Pulling the top clear sheet is the next step after the frame is lifted. This step is the. most easy part. No issue there, just pull the tabs off. Again, I would do it gently as to prevent pulling off the screen protector itself which is stilly newly applied. Just a precaution. I did not have any issue with both applications during this step. T The last step is to look for bubbles and squeeze out ones if there are any. The second application had a small one near the middle. It was very easy to eliminate. I used the squeegee to squeeze it out. Only few swipes down without having to chase it out to the edge at all. It was probably because I did not consistently apply pressure around the frame as the first time. Fingerprint sensing is good. There is no need or perceived performance degradation at all. Unlock is as fast as without the protector. This is another point of concern for this generation of Pixel as it moved to use ultrasound sensing which can be impeded by solid material (a nature of sound wave). This flies so well. The screen protector has a light gap around the edge so it fits my case perfectly. The star is taken off is probably may not be the product issue and perhaps mine. However, I have reviewed few online reviews of this model and they have more or less ran into the issue of dust remained after applied this screen protector. I thought I have a way to prevent that from happening. I keep the frame down while peeling the backing sheet from underneath to prevent dust from falling on to the sticky side of the screen protector. I triply wiped the screen and inspected. The first application had what it looked like a fine long thread of fiber on it. It was so obvious and I couldn't stand seeing it. The protector is easy to remove by the way at this stage and that is a good thing. I attempted the second application and did more checks etc. This time was much better than the first time but still one spot on the screen that caught a spec. of dust. This one is a "spot" kind of dust and it is very small and is not like to catch eyes. That is much better. I think the product is good. You need to find a good clean room perhaps to get complete dust free installation. I just wish Spigen with installation apparatus that give dust free installation like some other brands for Pixel 9 pro. recently.

Exact fit, simple installation, no bubbles! Also a great price for a great product!

awesome installation. Putting a screen protector on can be frustrating, but not here. I watch a few videos and they helped. I wanted to get the SP on as soon as I unboxed the new phone. The E-Z fit tray makes it all work. After lifting the EZ Tray just to watch the Protector flatten out with no errors is for celebration. One tiny bubble was pushed away. Done in 5 minutes. get a nice clean place to do this.

The application process was straightforward. The screen protector went on cleanly without any dust or bubbles. I highly recommend trying this screen protector if you have a Pixel 11 Pro XL; it's definitely worth the cost.

Does not seem to adhere well. I put thjis on a brand new phone, as in I opened it, and put this on before I even set it up. I thought I would have an easier time, because it was clean. I cleaned it to be safe, and used the dust remover, even though I saw no dust. I used their application tool. It works soso. The issue is when you pull the tape to release the glass, it lifts the glass up in the middle of the phone. This can cause new bubbles or issues. I ended up with a bubble, that I can't get out, and I notice it when doing any photography, or reading documents. It's a real pain. I never had this problem with the other brands I used in the past on my phones. Very disappointed, because I had heard a lot of positive about the brand. On the plus side, the fingerprint reader works great with the protector on. It did fit the screen well and does not appear to have affected the touch sensitivity, other than where the bubble is.

Fácil de poner y no deja burbujas

Absolutely amazing installation process. You get all the needed tools and there is almost no room for error. The only thing that can go wrong is getting some dust under the screen. I also notice that the screen feels more responsive with this screen protector than with others. There is also a small cutout on top for the earpiece which I think is a nice touch. As another reviewer mentioned, there is a little gap present on the edges. I think this is a great feature since it plays nicely with cases that have a raiser border. It fits excellently with a Spigen case The protector is also google certified so the fingerprint sensor works flawlessly. Certainly worth the money.

機種変更のタイミングで、レビューやおすすめ記事でよく紹介されていたので購入。個人的にはかなり貼りやすく、空気も全く入りませんでした。クリーニングシート？も付属されているので画面をピカピカにした状態で貼ることができます。小さなほこりも除去できるように、シールのようなものも入っているのが便利でした。 懸念していた指紋認証は、フィルムを貼り付けた後、再度登録し直せば問題なく認識してくれます。 感度も良すぎるくらい、良いです笑 色々なレビューがありますが、個人的にはかなり好みで引き続きこちらを利用したいなと思います。 一度スマホを落としてしまいましたが、画面割れもなく強度もそれなりにありそうです。

I’ve been a huge Spigen fan and a long-time user of their cases, but this was my first time trying a Spigen screen protector, and it turned out to be a massive disappointment. Two days after applying the first protector, it started lifting along the right edge. I figured it might have been an alignment error on my part, so I removed it and applied the second protector from the pack. I took every possible precaution to ensure a flawless install, but the exact same thing happened—the right side started peeling up again within a couple of days. I'm not sure if I just received a defective batch or if this is a design flaw. For context, I am using an original Google case, so a bulky or incompatible case is definitely not the issue here.

Excellent!!! Good quality and easy installation. 👌🏽