BOMEI PACK High Temp Tape Powder Coating, High Temp Masking Tape 2 Rolls x 2 inches x 216 Feet, Heat Resistant Tape, Epoxy Release Tape Ideal for Painting, Powder Coating, Circuit Boards

Worked perfectly for what I needed! Perfect size, very durable and stood up to a very hot heat test like a champ!

I use epoxy in small pours to fill knot holes in wood or repair insect damage. I hate when I spill over or just have really tiny holes. I used the tape to protect the wood around the pour zones and it was fine when I used my heat gun or torch to pull the bubbles up.

Due to how thin it is, it is very easy to wrap around things. It is a little flimsy so it may not work for things that may need stronger tape.

I wanted to see how well this tape performed based on its specifications. I heated it to 200°C to see if it held up as they claim. The tape was not affected by this temperature at all. The tape didn’t lose any adhesive strength, nor did it leave any residue after being heated to this temperature.But how would it work at 10% above specs? Heated it to 225°C. Same results. Okay, how about 20% above specs? Same results. 30% above spec? I heated it to 255°C (28% above) and the tape continued to perform excellently. It released easily from the surface it was attached to, and the tape still had adhesive power even though I heated it heavily in open air with the adhesive exposed to the air and the heat.Amazon Vine sent this product to me for an honest unbiased review. Would I recommend it for others? Yes, this appears to be an excellent tape for masking off your projects at temperatures up to at least 250° C, and even higher.

Regular masking tape is good for paint, but I like this for moisture protection. It is a good solution for when you need something like a combination of both scotch tape and masking take.

This is a great tape. I originally got it for masking bisqued clay projects for glazing and it can handle heat if I need to speed up drying. There's no residue that would interfere with the next coat of glaze. It also works on the 3D printer bed to help with adhesion. It's a little hard to get off the roll, but I also have a 6" roll. The variety of sizes it comes in are super helpful.

This tape works well to keep resin in an isolated area. The resin doesn’t stick to the tape. Good quality.

I got this tape for making UV resin casts. Sometimes, you need a flat surface you can pour your casts on, and if you put much effort into the project you want to be really sure that the resin will release from that surface once it's cured.This tape works well. It doesn't inhibit the UV light, so my 360° UV light can cure all sides of the project. Once cured, the resin releases easily as soon as you flex the tape.The only thing I've run into is that it can be a little hard to get a bubble-free application of this tape (bubbles in the tape would cause dimples in the surface of the resin). But if you go slowly and are careful, you can overcome this fairly easily.