CISBO SB398 Parking Reverse Sensors Buzzer LED Display Canbus Kit, Dark Grey, Set of 4
Description
- Compatible with Canbus car
- Audio Buzzer LED Display
- Detachable sensors
Suitable for cars (both older and newer) with and without CANBUS systems. A car with CANBUS (mostly cars made from 2004 onwards) means that the car has an onboard computer. If a non-CANBUS parking sensor kit is fitted to a CANBUS car, the computer in the car detects an extra device connected which then causes the voltage to drop, causing the kit to malfunction. Fitting this kit will eliminate this problem. Sensor sensitivity adjustment from the control box. Main Features: Easy to install Sensor sensitivity adjustment (For example, if the sensors are fitted closer to the ground due to the car having a lower bumper, the sensor sensitivity can be reduced so that the detecting angle reduces) Five different frequencies of alarm sound according to distances. Detachable sensors Waterproof and duskproof sensors CE approved Three year warranty Kit includes: Four sensors with 2.5 meter cable Four sensor spacers Main unit (100 x 72 x 26mm) LED display (98 x 25 x 19mm) with 5 meter cable 60cm power cable. Red wire to reverse light, black wire to ground, yellow wire to ignition (optional, can be connected if the car has a CANBUS system) 21mm Hole Saw - the size of the sensors 3M double sided sticky pads for mounting the main unit and buzzer User manual and installation guide Technical parameters: Operating voltage DC: 12V Power consumption: max. 65 mA Detection area: 30 to 150cm Operating temperature: -20 to 70 celsius
Reviews
J**T
Didn't fit had to return it.
I only got the wrong model for the car. Had it returned and money refunded.
D**C
Great
Working six months perfect and being able to adjust the sensitivity is great for mounting low!
C**S
One Star
was working for about 3 months not but for 25 pounds.
P**N
easy to
brill worked perfectly, easy to instal
A**S
CISBO
GREAT CISBO REVERSING KIT!!!!!!!
S**N
Accurate
Had these for nearly a month now. Very helpful bit of kit especially with my tinted rear window at night time. I like that the display shows a distance measurement alongside the directional bars. 0 meters means there's a small gap remaining between my car's towbar and the object behind.I've had the chance to use them at different times of the day in different weather and straight after having the car spray cleaned. The sensors have worked fine in all conditions with sensitivity set to maximum.It begins detecting different objects at different distances. For example..A flat wall: 2+ metresMy neighbor's Juke: 2mMy neighbor's Astra: 1.5mLampposts: 1.5-0.8mBeeping starts at 1.5m. Anything detected further away than 1.5m is only shown on the display without audio.There's a small button on the device that allows audio to be turned off.I've had my sensors (originally black) colour-matched to my car.Will likely spray the sensors with WD40 very soon to help protect the sensor sockets from water.It's been an accurate piece of kit this far without fail up to now.Update 27 March 2020One of the sensors started beeping randomly when the car is in reverse although there's no object behind the car. This was resolved two months ago by doing just I planned in the original review: use WD40. I took out the sensors, wiped them down, including where the cable enters, and sprayed them with WD40. I repeated this about a week later. They've been trouble-free since.These have been brilliant for tight parallel parking.
Common Questions
Trustpilot
3 days ago
2 weeks ago
