40m/132ft Irrigation Hose, 163Pcs Garden Irrigation System Micro Drip Irrigation Kit with Y Hose Splitter & 4 Types Nozzles & 5 Tubing Valves, DIY Auto Plant Watering Kit Misting Cooling System

I sat in my living room and assembled everything, then carried it out and installed it. I don’t recommend doing it that way because I ended up with extra tubing in areas I didn’t want it and not enough in others. This is not a fault of the system but of mine. I also added about 3 feet of regular water hose to get the reach I wanted.The sprinklers connect very easy, just push the tube on. I didn’t use the hot water because I felt it made the tubing to squishy so it wouldn’t go on all the way. I would not have been able to use the water hydrant connection because the threads wouldn’t match up to my timer. I just spliced it to an old piece of hose. I didn’t take away a rating star because the rest of the system is that amazing.There are enough parts here to do a pretty good sized area. On full blast, I’m spraying about 12-15 feet out of my flower bed. Get a small clear Plano box for your extra pieces, it’ll keep them organized and easy to get to. Very easy system to build, and install.I will update if anything goes wrong. Today is 07/24/22

Kit went together fine. Make sure to warm up the tubing and push all the way in it it’ll pop out.The hose bib connector is the wrong thread pitch for American plumbing. I’ll either use the Teflon tape and force it or buy the correct ones at the store. The product description should be updated for this as it is misleading.

The tubing supplied is way too soft. Had to install zip ties to keep it attached. Heating the tubing for ease of install was a fail also. Tubing doesn't shrink back for a tight fit.Hose bib attachment is for european threads. Had to buy adapters.The 3 stars are for the awesome collection of connectors and jets but I probably wouldn't buy again knowing what I know now.I did buy more 1/4" tubing from Mixc. It was more rigid and worked well.

You will find everything you need in this bundle. If you wish to conserve water and focus attention on the plants that need it most, this item is for you.

My idea of a drip irrigation system is making the watering of plants more efficient. The connections on this system are constantly popping apart even with minimal water pressure. When it does hold together, the water does not reach most of the drip points.

Easy to put together. Pretty much everything I needed

I have raised beds, planters and grow bags in my backyard and ordered this kit to “add on” additional drippers and sprayers to my existing system. I am very happy with what the kit provided since it allowed me to expand my existing system. Here are some thoughts on two scenarios where I think would add value:Scenario 1If you want to connect this kit to your backyard hose bib, you will need to invest in (at least) a couple of things like: a back flow preventer; pressure regulator; and filter. Depending upon how far you need to send the water, you may also want to buy 100’ of 1/2” distribution hose (or more) and you will probably want to buy a water timer so that you do not have to manually turn on/off the water each time.In my case, I purchased most of the additional materials mentioned above from my local big orange hardware store and used them to run the 1/2” distribution hose out to my garden. I used the parts in this kit (1/4” barbs/tees/hose/drippers/etc.) as “add-ons” that connect to the 1/2” distribution hose and run water to my raised beds, grow bags, etc. I have all of this automated through the use of a Rainpoint water timer (see separate review) and am very pleased with how it all works.Scenario 2I do not have a rain barrel system yet but this kit seems well suited to distribute water from that kind of setup since you probably will not care about backflow, do not need a pressure regulator and filtration may not matter. In this case, you may still want to invest in a 50’ or 100’ coil of 1/2” distribution hose, to get the water near your planting beds, then use the included 1/4” barbs/hose/etc. to run the drippers/sprinklers where you need them.For my future plans, the 3/4” hose connectors in the kit would allow me to join a length of 1/2” hose to the rain barrels then use a tee connector & shut off valves to join that hose to my existing system. This would allow me to continue using water from the house but have the option to open the shut off valve and use rainwater I had been harvesting.InstructionsA full color parts/instruction sheet is included that gives a general idea of how the different drippers, sprinklers and sprayers work but I found it best to just connect them up, see how they worked, then move them where I needed them.TIP: cut your 1/4” hoses a few inches longer than you think you need so that you may simply snip off the end and attach a different sprayer/dripper to it as needed.Nearly everything in the kit seems to be made of a good quality plastic but, of course, only time will tell how well it all holds up.Hopefully, this review was helpful to you.

Fácil de instalar.

Buen producto