KeterFolding Work Table, Portable Workbench w/ 12" Clamps for Garage/Wood Shop - Heavy-Duty and All-Weather for DIY Home Improvements and Worksites

I have 3 of these workbenches. They fold up very compactly, just 4-1/4" thick in a solid 21-1/2" x 33-1/2" rectangle with rounded corner so it doesn't hurt jabbing you when carrying it folded. Super easy to set up (maybe 5 seconds) and also to collapse. When collapses, the legs fold right into the workbench top. Only thing that can be tough is shoving the middle piece in enough to snap to lock. My husband has no problem with it, so probably just an arm strength thing. That middle shelf is convenient.They are extremely functional. I use it for sanding all the time and all my different grits sit on there nicely. I stain using sometimes 4 different colors and the ones I'm not holding in my hand sit there waiting for me to grab them, as are extra rags. Lately I've had my large sliding compound miter saw sitting on one of them. I've had my oldest one for about 4+ years now in a working wood shop and it's just as sturdy now as it was when it was new. No warping that I've noticed. Much easier then the other very popular portable work bench. One of mine has sat in the rain for a few weeks while working off site under no cover. Happy to not have to worry about rusting. There is literally no end to uses not just in the shop, but also the craft room or even gardening shed.

I'll start with the obvious: This is a very cheap folding work table. Expect the plastic molding to be imperfect.However, I just bought my second one of these and for someone who works on them occasionally, both have been far more functional than I expected for the price. The plastic molding issues are mostly cosmetic, a few stringy strands to pull off when I unpack them. The tolerance in the built-in clamp holders is pretty tight, the clamps are a bit difficult to pull out and put back in to their stowing slots.But, that's nothing. These tables are fantastic, despite the very minor issues above. Fix the above, and you're paying at LEAST 4x the price per table.These fold up into almost nothing. When not in use, they stow away in hardly more space than you'd use to hide a folding chair. They have handles on all sides, and they are light enough for someone who works on stuff to lift easily. The weight is easy to manage. I'm able to hold one of these tables at full arm's length, long enough to turn sideways and slide into a little slot against the wall next to a cabinet behind a desk. They are extremely portable. Taking them up and down stairs is easy, due to flexible handle options on all sides. Two hands, one hand, one in each hand, easy.They unfold instantly. If you don't need to hold a lot of weight, this table goes from suitcase form to functional table in about one second flat. If you need to hold weight, you do have to spend another 10 seconds or so making sure the supportive flaps are locked in. Once they are locked in, two reasonably fit people could dance on top of this table with zero concerns. I use one for my miter saw and once set up, never thought I was using a plastic table.The real kicker is, they also fold back up instantly. You just unlock the support flaps, hold by the correct handles, turn it upside down, and shake. All of the legs fold back up into place, maybe having to nudge one or two to get back to fully folded suitcase form.If I had bigger hands I could easily carry four of these, whereas just one KREG table is my limit.The action of the clamps isn't perfect but it's good enough for what you'd use this table for. The clamps are actually pretty smart, with both clamp parts moving independently on the bar. This lets you quickly expand the bottom of the jaw to make room, quickly slide the bottom of the jaw to meet your part, and squeeze the trigger a few times to lock in place without having a lot of clamp bar sticking out from the table. My only complaint is the holsters for stowing the clamps are too tight a fit, I have to use a trick to get them to fit back in once I'm done. (Release the upper jaw. Slide all the way up. Squeeze the handle just once. Slide the lower jaw to meet it, then it will fit.)I've bought two of these now. The second one is for use indoors, and came in handy to glue up 3D prints and wrap holiday gifts, each time taking less than half a minute to pull out and set up, and under half a minute to pack up and stow. A+.

I bought one of these six or seven years ago and used it until I finally managed to break on of the leg hinges while folding it up (definitely my fault). I use it for just about everything except hand planing lumber and chopping mortises, which requires my heavier, more study wooden workbench. Once you get the hang of securing the included clamps to the top, it's a pretty decent saw bench, assembly table, and temporary base for table top machines, like an oscillating spindle sander or bench grinder.

The media could not be loaded. I just added these workbenches to my collection of tools in my storage sheds. As a single lady, these makeup for the lack of manpower, and allow me to work smarter and not harder, on the many projects I’m taking on by myself! I’m above average height for a woman at 5’5.5” tall, so the size of these portable tables is just right for me. They weigh approximately 22.5 pounds each.Looks are deceiving because it looks like it is just thick but flimsy resin plastic but you’d think it was made of steel how sturdy it is when it’s locked and holding weight! My video demonstrates its great functionality and ease of setting it up and breaking it down!Each table comes with two clamps that has a compartment under the workbench so they won’t get misplaced or lost! You can sit your Yeti of iced water underneath the workbench while you’re working. It serves like a shelf within a portable table! You can adjust the height from the fully adjusted setup table, to the storage position collapsed, in about five seconds; vice versa it takes about ten seconds! I’m so glad I found these workbench portable tables! I will never buy a set of sawhorses again! Five-stars and a thumbs up Keter! 👍🏾

Great table, hard to get parts needed for the table.Broken clamp and called manufacture to order a new one not under warranty. Was told to go on line and order it. Tried several times and called manufacture back again, started to get the run around. Never got a answer from the manufacture.No issue from the seller.

As a mobile car detailer, I'm constantly searching for equipment that is both durable and portable. The Keter Folding Work Table has proven to be an absolute game-changer for my business, and I can't recommend it enough!

Love this collapsible table. This keter table really makes my life as a mobile detailer way easier. It allows me to hold my floor mats in place while I blow them off and clean them. Def 5 stars.