GDLF Outdoor Grill Table for Large Big Green Egg, Metal Grill Cart Station

Unit has served me well. Follow the directions closely and take your time. It did take a couple of hours but found the directions pretty decent despite some of the other reviews. It has stood up well to the outdoor environment thus far including two harsh northern Michigan winters. Quite pleased with it and exceeded my expectations. I have a size Large BGE in the main compartment and a Mini BGE to the right and it supports them fine.

The item arrived in two large boxes. Packaging should probably be a little better considering the risk for damage during shipping. One of the boxes had a hole of about 8" diameter and it appeared some of the parts may have been pushed back into the carton and the hole was covered by tape. Upon opening the boxes all the parts were in the carton. Assembly instructions recommended two people. I was able to do the full assembly by myself except for help from a second person to stand the table upright after putting on the wheels. I was a little concerned that a few of the parts were a little flimsy but after assembly the overall unit is very sturdy and looks exactly like the picture on the Amazon website. The wheels are good quality and all parts and hardware were clearly identified and tagged. I have been looking to purchase a table like this for my BGE and I have looked at several options. I am very satisfied with this item and it is a great value compared to other tables on the market.

Bought this for our XL green egg - it shipped quickly and arrived in 2 boxes at the same time. Instructions were pretty clear - always room for improvement. The only issue we had is there was a hole missing for the bottom door pin for the cabinet door on the right side. We drilled it ourselves and were just a tad off but we reached out to customer service with images and they issued a partial refund which we were pleased with. One shelf was a bit warped but it was easy enough to bend it in place. All in all we are quite pleased with this piece.

Its a really good table for the XL BGE. Trust me just get this one. The only con that I can say is that the cover will not last in the Florida sun, I really recommend using fabric spray paint on it right away! Home depot have cheaper fabric spray paint. It will prevent UV from causing fading and added bonus of painting over the logo. The original cover that I had sun faded and became very weak and tore due to sun damage -- about 8 months -- (called customer service and got lucky and got a replacement from free) Also to prevent the seam from tearing --- Use a very thick tape and stick it where the corners and top of the grill are making contact --- I recommend https://www.amazon.com/dp/B08V4DXTRZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1 for the wheels --- Just put some silicone lubricant to prevent from rusting. https://www.amazon.com/dp/B0019LV3GO?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_12&th=1 Other than those --- I had the table for 2 years now and its still in good working condition

Kind of flimsy, rusts very quick and the cover is not good at all. I bought this about 6 months ago and the cover is already falling apart and fading. There are rust spots forming in various places but it does what it is intended to do. Overall it is ok.

I bought this after seeing the reviews that were mostly positive, but the main con was that the assembly instructions were not that good and it took forever to assemble. This was not my experiences , what I found was that the packaging was well thought out, packed tightly to fit into a small package with plenty of packing materials to keep the pieces from scratching other parts. I also found that all parts were clearly marked numerically , and the numbers were also stamped into most of the pieces where they won’t be seen after assembly . The instructions were very clear and my assembly went pretty quick. All parts were a tight fit and aligned nicely. My advice during assembly of this and similar items is do not tighten all screws at each step until instructed to or after most parts have been assembled, this will allow for all part to line up for proper screw placement. If not you will most likely have to go back and loosen these screws to make it all work… Once assembled I rolled it easily into place on the heavy duty wheels , it rolls smoothly with little effort when unloaded. Overall i give this 5 stars based on price /value , quality of the packing, and the good looks of the product. **One issue i do have with the stand is with the stainless top, at the 4 corners of each top, there are visible marks where the stainless protective plastic was pre cut at corners for fabrication. There are clearly visible lines on the stainless that wont wipe off. This is shown in the pics. So I plan to email the seller and see what the options are to get this fixed , will follow up with any results

BUYER BEWARE! Do not purchase this cart (for the Large Green Egg grill) unless you have a LOT of time, patience, some significant level of experience in assembling equipment, and the money ($600+) to pay to ship the unassembled heap of 30+ parts back to the seller if you are unable to assemble it and had neither foresight nor inclination to document with photographs each difficulty you encountered in your frustrating attempt to assemble this product. I am no engineer but I have assembled numerous “assembly needed” purchases over the last 20 years and this cart was the first product I could not assemble. There were over 30 individually wrapped parts. Step 1 of the instructions are to make sure we had all the parts and they weren’t damaged. So we did that - leaving us with over 30 parts laid out across our garage floor— That took time. Some pieces were dented but it seemed we’d be able to make it work. But, as we got to steps 5 and 6 (of like 50 steps) we got stuck. The parts didn’t fit well together, screws provided and called for in the instructions weren’t long enough to connect pieces they were supposed to be used with, etc. After more than 2 hours of trying to assemble it, my daughter and I gave up. We then spent another hour disassembling the parts and trying to get them in the box which was already damaged when delivered. Imagine my surprise when after all of this time and frustration I learned that unless I could prove that the parts were defective the seller would require me to pay out of pocket to return the heap of parts they sent me before I could get my refund of $250. Well the cost to ship back the parts (not to mention cost of repackaging) was over $600. When I tried to call the customer service number I got a recording to send an email. When I sent an email the response was send proof of a defect. Or let them troubleshoot by identifying the specific parts I had a problem with. I don’t have the time or the patience for this. So I guess I am just out $250. If you want/need a nearly finished grill cart and don’t want to be part of the manufacturing process don’t buy this grill cart. UPDATE:After I submitted this review the seller reached out and offered to refund me for the cost of the grill cart without requiring a costly return. I appreciate the courtesy and thought I should amend my review to reflect it but otherwise my cautionary review stands.

For the money great product. For the looks great product. Here I am not even 4 months later, the label itself is out of any rain. Already have rust on the door! To me, not worth the money if rust is happening already. Insane. If this were in the elements I might understand, but for the price, there needs to be a coating protecting the unit. I'll reach out to the company to see if they'll honor a door replacement. Well see...