240V 145A Gasless MIG Welder | 3-in-1 MIG/ARC/Lift TIG Inverter Welder with IGBT Synergy | Digital LED Display | Portable Stick Welder with MIG Torch & Flux Core Wire

I've used these for a few jobs over the last few months and have no complaints apart from sometimes the cable can come out as it is just a twist fit. Ideal for occasional use. Very lightweight and looks good too.

Only learning to weld and bought this as it's a multi welder. Tried the MiG gasless and rod but not the other functions yet. So far so good, 13amp fuse pre fitted and works fine so far. Welds are nice and tidy. Only couple hours practice use so far but impressed by what it can do for it's surprisingly small size.Will bring it to welding course soon and ask ye man to give it a test run (he knows what to look for in a weld)Haven't got the tig attachments or gas yet but will get around to it when I get a chance

Upon using this item on a 16 amp plug the pins get hot with a 190 amp machine setting ? Keeps blowing the 16 amp MCB at the consumer unit and therefore as the 13amp plug instructions I connected this unit to a 32 amp supply and draws 22.8 amps 230 volts AC @ the 190 amp machine settings ?? So a 16 amp industrial plug is totally wrong for the manufactures advisory information ?? and a bigger input cable is require for the 32 amp supply ?

Lovely welder very impressed, very variable for power and wire spread, all at a very low price for what it can do

Go elsewhere, welder can't lay any beads down at all. I even called a friend who's a welder as thought I was doing something wrong. Turns out it's rubbish. Waste of time and money.

Cracking little welder 10/10

My limited experience and knowledge led me to take it to a professional welder, he set it up welded 3mm steel and pronounced it fit for my purpose.

Well this is the second one of these I had to buy. (First was missing the electrode holder). Right from the start it was bad news. The wire feed motor isn’t powerful enough to feed the wire at all until you turn the power up so high that you can’t weld anything thinner than 3mm without it just melting away. Doesn’t matter how loose I set the tension, it won’t turn unless the voltage goes up to at least 18. Even then it struggles and sometimes stalls. This welder is probably quite good for heavy welding such as industrial/construction work but for home use it is not very good at all.