Ivory White (offwhite,creamywhite,Slightly Yellowishwhite) PLA 3D Printer 1.75mm Filament - FilaCube 1kg PLA 2 3D Printing Plastic for Bone, Lithophane, Piano Key, Elephant tusk, Tooth, fang

A great color match. This is a good quality filament. I am able to print reliably which is important as I run my printers 24/7. Easy to use as you can likely use the default settings on your printer for PLA. I did on my Bambu P2S. Have not yet run it on any other printers. Decent value for the filament especially to get the color match. Filacube, is there a PETG and/or ASA version in the works?

Pros: * finish is amazing! smmth and slippery * interlayer adhesion is very good * dimensionally stable * overall beutiful prints * made here in the USA * responsive tech support Cons: * Warping. Unintuitively, you need less than 40C bed temp, and even down to no bed heat at all to print well for large flat items. but that was not enough for items with a small footprint, but tall as the part in the pics. They still warped, on EZMat, tape, glu - you name it. * for those as in the pictures, I ended up using a standard PLA raft, pausing, changing filaments to Filacube for the part. this kept it down on the bed. I'm still experimenting, trying different sized brims, as I do not want to keep using different materials for these specific parts. And that's just it - part geometry plays a huge role in your results. I spent at least 48 hours trying to get these parts to print without warping, and I would have only done that if the finished parts printed in this material were stellar. And basically, they are if you can control the warp of certain geometries. Sumamry: I have not given up on this material. It's look and feel and strength are really nice. I think I just need to get my printing chops up a bit to leverage it.

This PLA2 is an awesome product!!!! Soft, sandable, dimensionally sharp, and it can be dropped, used in mechanical products, thrown in a washing machine, you name it. My company and I have torture tested every prototype we have made with this product. It can take the abuse. I have been very impressed with this white. It's color is very bright white. This product is incredibly forgiving, and only seemed to have print issues when I would make a mistake with setting up my printer. Prints really well at 198 - 200c with a 50 - 55c bed. While I have gone as hot as 210c on the nozzle with little issue, any hotter bed (60c+)and you will get elephants foot for sure. You could probably print on a cold bed with success too (and the right bed adhesive) though I always like to print with a little bed heat. This filament would be awesome for first time users and advanced users alike. It gives you plenty of room to play, is very forgiving, and gets you great results. I will definitely order again.

Wow this stuff is interesting! Once you get it to print properly, it creates a really high quality sheen/touch. This stuff does not feel nor look like regular PLA. I’m extremely impressed, however, the first layer adhesion is the trickiest!! I’ve found that I can only use this filament for prints that do not have any supports on the build plate. I have no idea why, but every time I try to print a model that has supports, this filament craps out on the first layer of the tree supports. Makes no sense to me and severely limits where I can use it. Other than that, this filament is really beautiful and their selection of browns is so unique! I’ve been looking for grey-browns for a while and this company nailed it. I hope they come out with more colors in the future. Terracotta would be amazing!!

I'd designed a small keychain for a former local high school logo (gotta love consolidations) for some family members that once attended. That's when I noticed how absolutely few manufacturers make a maroon PLA filament. After searching around, this seemed to be the most color accurate I could find to my needs. And it's a gorgeous maroon. Not only that, but the filament sticks well to the bed and prints great. No issues at all on my setup. Setup - FLSUN Super Racer with MicroSwiss Dual Gear Bowden Extruder, MicroSwiss CM2 0.6 Nozzle, Capricorn Bowden Tube, FYSETC PEI build plate. Settings - 180c print temp, 60c bed (these settings worked great for ME and are my normal settings for PLA, your printer, even a FLSUN SR, will likely use different settings, just posting these to give more info to those looking at this filament).