ARCTIC Freezer 36 A-RGB - Single-Tower CPU Cooler with Push-Pull, Two Pressure-optimised 120 mm P Fans and ARGB Lighting, Fluid Dynamic Bearing, 200–2000 RPM, 4 Heatpipes, incl. MX-6 Thermal Compound

I can’t recommend this cpu cooler enough. It looks great, has great ram clearance and it manages to keep my Ryzen 9800x3d cool even under heavy load. Also the fan installation is effortless with the snap on design, no need to mess with those pesky clips!

Did you get a prebuilt with a lame stock cooler, or buy a smaller one with your first build? This will definitely take it up a notch not only with the looks, which is super sleek, but the cooling and efficiency is fantastic. Your CPU will thank you especially when you’re playing intensive games! This is an absolutely stellar price for what you get! Highly recommended.

I installed this CPU cooler on a MSI Pro Z790 P mother board with an Intel i5 12600KF processor. This is a large cooler with two fans so make sure you have enough room. They gave you everything that you needed for the install. I wish they would have included an instruction manual as opposed to digital instructions. This cooler works great! It is keeping the CPU temperature at 30 degrees Celsius. It was very easy to install. I love the snap-on fans and the push pull configuration. This was a great value. It is very reasonably priced, and it is a quality product. I would recommend this CPU cooler.

This cooler is amazing. The install was simple on a lga 1700 socket with the contact frame, it could be a little scary cuz you remove the bracket around it, but very easy are simple to do. Very easy to mount once contact frame is on. It's not to big and would fit in 90% of cases. I have a relatively small case(lian Li lancool 205m mesh) and it fit no problem and plenty room with the ram sticks. Very vibrant Argb and the fans are dead silent and have really good airflow. I have a 12600kf and the performance is crazy for an air cooler. Idle it's sitting around 27c and playing games like hogwarts legacy doesn't pass 39c under 100% load the peak was 60c. This cooler isn't talked about enough. For 33 bucks it's a steal and better than any other.

This is a great cooler for the price and is cooling my Ryzen 5 3600 around 25 C better than stock under load. Fits well onto my ATX motherboard and gives plenty of clearance for RAM and motherboard heat sinks. Cables for power and RGB are a little short, had to get creative to keep them from resting on top of the fins. Pins on some of the connectors for power and RGB were bent before it arrived to me, but were easily bent back into place with a little elbow grease. Also, one of the cooling fins appeared slightly deformed near the top-front, but does not seem to affect performance or aesthetics enough for me to care. It works, and it works well, and that's good enough for me.

These fans are really quiet, they look great, was easy to install on a AMD cpu. After about a few weeks I started to notice some raddling on one of the fans, I double checked to see if the fan was catching a wire or something but nothing. It's unfortunate that I got a bad fan but even then, I would still buy again. Update! after contacting support and providing them with proof of my problem, they sent out a replacement fan for free. It did take them some time to help me but they fixed it! Updating to 5⭐

I have this item and the Arctic 36 non-rgb air cooler and I love them both. They were easy to install. They keep my CPU and socket below 30C at idle, and they are both very quiet. These items are very well made, the type of quality I would expect from a German company. Will definitely use again in the future.

Nice cooler for the money and quiet too. It keeps the 12700K in my home server nice and cool without making a lot of noise.

Este disipador de Arctic es de lo mejor que he probado sin duda alguna. No sé que proceso de fabricación o diseño han seguido, pero me parece una obra de arte. Con solo 4 heatpipes lo he probado con un 7600X, con un 7700X, con un 7800X3D y con los 3 he obtenido temperaturas mejores que con otros disipadores más grandes. La calidad del disipador es buena, denota solidez, su estructura es algo más grande si lo comparas con el Arctic Freezer 35 o el eSports Duo (34), pero nada exagerado. Me he dado cuenta de que donde han sacado partido ha sido aumentando la densidad y grosor de cada una de las aletas del disipador, lo cual explicaría parte de su éxito como disipador. Respecto a los ventiladores, incorpora 2 Arctic P12 PWM PST, los cuales se montan con un sistema de tornillos (y no con pestañas), además de que lo hacen siguiendo un sistema push-pull. De los ventiladores he de decir que son silenciosos, incluso a máximas RPM a penas se escuchan. Configuradas las curvas con Fan Control, el rendimiento es muy bueno, dando en reposo temperaturas de 36-40 grados y jugando en torno a los 55-60. Comparando con un DeepCool AK620 y también con un DeepCool Assassin IV, he obtenido los mismos resultados, teniendo en cuenta que los de DeepCool son más grandes. No me queda más que recomendar este disipador, cuyo montaje es muy sencillo. Para usuarios de Intel adjuntan una placa para evitar que la CPU se doble, lo cual es un detalle. 10/10. Ya veis en las fotos los resultados en gaming. Por este precio, es un lujo de disipador.

Kendi ateşini üreticek kadar değerleri 85 ve üzeri olan amd işlemcimin değerlerini 35-40 a çekti. Montaj konusunda sorun yaşamadım ama kendi tercihlerimden dolayı kasamı artık yatık kullanıyorum. Yani almalısınız Benim ana kartım asus. Asus'un kendi uygulamasıyla rgbleri istediğiniz şekilde düzenleyebilirsiniz.

C'est un excellent ventirad de qualité, il est un peu difficile à monter il faut visser en même temps dessus et dessous la CM. Maintenant je conseillerai de le monter en dehors du boitier sur la CM "brute" en insérant avec prudence le CPU comme première opération de montage avec les gants de chirurgien pour le socket et le CPU. La pâte thermique fournie est facile à appliquer, Arctic conseille de faire une croix avec. Malgré mon CPU puissant cela ne chauffe pas , j'ai aussi 3 ancien ventilateurs de boitiers dont deux gros de 200mm sur mon ancien boitier Cooler Master Storm. Ce ventirad possède deux ventilateurs aRGB un de chaque côté de la tour c'est cela qui est sa grande force car il permet d'évacuer la chaleur avec l'échange entre les deux ventilateur à travers la tour. Il n'est pas tros gros moins que mon ancien Be Quiet de plus de 10 ans qui bouchait un slot RAM. Avec ma MB MSI mes 4 slots RAM sont libres! C'est très beau aussi l'éclairage des deux cotés , lisez comment le brancher selon la méthode propre à Arctic ( daisy chaining, branchement des connecteur "en guirlande" ) en allant sur leur site. voici la configuration sur laquelle je l'ai installé tout est vendu sur Amazon: -i5-14600K (le meilleur des i5 qui nécessite une bonne ventilation) -RTX 4060 MSI (suffisant pour mes jeux à moi) -Arctic Freezer 36 aRGB (excellente tour de refroidissement pour ce CPU puissant) - 32 Go DDR5 RAM Patriot Viper Venom 2*16Go 6000Mhz ( excellente RAM DDR5 de marque pas trop chère) - Samsung SSD 990 EVO Plus 1To Sur une photo on le voit monté sur la CM avant le montage du GPU Nvidia , les 4 slots RAM sont bien utilisables

Zunächst einmal muss ich sagen, dass die Kühlleistung dieses Luftkühlers beeindruckend ist. Dank der vier Heatpipes und des Push-Pull-Systems wird die Wärme schnell abgeführt, sodass meine CPU auch bei intensiven Anwendungen und Gaming-Sessions nicht zu heiß wird. Die beiden 120mm P-Lüfter arbeiten wirklich leise und dennoch sehr effektiv. Besonders positiv fällt mir das hydrodynamische Gleitlager auf, das für eine lange Lebensdauer sorgt und dabei eine angenehme Laufruhe bietet. Ein weiteres Highlight ist die ARGB-Beleuchtung. Die LED-Streifen sind nicht nur ein schöner optischer Effekt, sondern können auch angepasst werden, um sich in jedes Setup einzufügen. Ob du nun die Farben statisch magst oder die dynamischen Effekte bevorzugst, der Kühler lässt sich wunderbar an die eigene Atmosphäre anpassen. Das Installationsverfahren war ebenfalls sehr unkompliziert. Die beiliegende MX-6 Wärmeleitpaste sorgt für eine gute Wärmeübertragung und hilft dabei, die Kühlleistung weiter zu optimieren. Der Kühler ist gut verarbeitet und stabil, sodass man sich keine Sorgen um eine wackelige Montage machen muss. Fazit: Der ARCTIC Freezer 36 A-RGB bietet sowohl hervorragende Kühlleistung als auch eine schöne RGB-Beleuchtung – eine perfekte Kombination aus Funktion und Ästhetik. Wenn du auf der Suche nach einem leistungsstarken, aber dennoch leisen CPU-Kühler mit toller Optik bist, ist dieser Kühler eine großartige Wahl. Sehr empfehlenswert für alle, die ihr System aufwerten wollen, ohne Kompromisse bei der Kühlung einzugehen! 💻🎮

would recommend