SunnyscopaWaterslide Decal Paper for LASER Printer - CLEAR, US LETTER SIZE 8.5"X11", 100 SHEETS, Personalized Water Slide Transfer Transparent Printable paper - DIY Custom for Tumblers, Glasses, Mug

I have seen reviews of other waterslide brands. This is the only brand I have ever used, and it works PERFECT for me. model planes, cars, candles, soup dispensers they all look professional. I was intimidated seeing waterslide nightmare stories, and this has been easy peasy from the get go.

This product was a quick and artful solution to adding a header to a wood photo board I built for our summer cottage. (See photo). I followed the directions and it worked like a charm. I can pass on a few tips—1. Use a high quality laser printer. The inexpensive Brother laser printer at my house gave poor results with washed out letters. I then tried using a high quality Xerox laser printer at work and the letters on the decal material came out sharp and well defined with excellent colors.2. I wetted the wood destination slightly with warm water before applying the decals. The wood surface was semi smooth (rough sanded with a light latex rub).2. After trimming the decals, I soaked in warm water one at a time for 30 seconds. I used a timer.3. I put the decal with the backing where I wanted the decal to be and with a couple of fingers lightly keeping the decal in place, I gently pulled the backing to the right and out from under the decal, leaving the decal on the right spot without handling it. The wetted surface allowed fine tuning the placement.3. I used a wet paper towel to smooth out the decal and press it into the texture of the wood.4. I slightly dampened a second paper towel and gently blotted the decal to remove excess water drops. Be careful with this step. The paper towel must be moist enough not to lift the decal.The decal has a satin finish that is visible compared to the flat finish of the latex wash on the wood. I would say it is noticeable from certain angles but not so much that it distracts. I will figure out what to do about it over the winter and will provide an update.Overall I highly recommend this product. It provided an attractive solution to giving my project a lighthearted header and should last for years to come.

This is great stuff! It worked petty well for me. The print was beautiful and it adheres great. My only complaint is that it takes 99 million steps for it to work. I don't have time for that. I'd definitely recommend for people who have an extra day to wait on the clear paint to dry, but it's not something I'll be buying again just because of the time restraint.

UPDATE - WHITE Decals - This review is actually for the WHITE decals and the below is for the clear. But Amazon won't let me do separate review for the 2 different products apparently. I will still give the White decals 4 stars. They are pretty much the same as the clear but for the fact that the decal prints on a white background. Same issue with streaking in the printer, but still apply easily and look good. Unfortunately the white decals were shipped in an envelope and were creased when they arrived so a quarter of the paper is unusable. Overall not a bad product.CLEAR DECALS - I have never used Laser decal paper before so decided to try it since sealing the inkjet decals is a pain. The paper feeds fine in my HP Laserjet. For my first try I printed 6 decals for mugs on one sheet but was only able to use the first two because the toner picked up from them and smeared on the paper below ruining the remaining images. So now I just print two at the top, cut them off, send the paper back through and print two more and then have to tape the last strip to a carrier sheet and send it through. This works sometimes and sometimes not. But beyond wasting a bit of this expensive paper, they are very easy to apply. After drying I bake them in the oven at 300 for 20 minutes and you can hardly tell they are a decal. However, they still scratch if you aren't careful. Made myself a mug with a dollar store mug and glued rhinestones on. It is cute so I am happy with the product.

I want to mention first: If you're putting this on anything but a WHITE painted/background, the colors WILL NOT SHOW UP APPROPRIATELY. You have to know that toner and ink are meant to be put on white paper, which means they will show up *VERY* transparent on this decal paper. THIS IS NO REFLECTION ON THE PAPER ITSELF! It's of very high quality. The actual waterslide decal part of the sheet is thin and very nice for scale models (which was my use for it). It only had to be in the water for a few seconds before it came loose and was ready to be applied. It holds up very well to using a hobby knife to reposition it (because they never go on exactly where you want) and is pretty tough all around. I used MicroSol and MicroSet on the decal after application, which it took quite well and melted nicely into every crack and crevice of the model. Even though this is a LASER decal sheet, it's still a good idea to spray a nice layer of clear acrylic varnish over the top since it *is* going into water.To use a decal sheet like this on something painted other than white, you'll need to either use white and cut out exactly along the decal, or find a toner cartridge that prints white. You'll then have to print the decal in white, then put the paper back in and then print over that with color. I'm waiting for my white toner cartridge to see how effective this is. If I can get that to work correctly I will 100% be using this decal paper from now on.

This waterslide paper was easy to use ( I purchased the laser printer version) and I did not have to spray a clear coat before submerging it in warm water. I applied this to my fuel tank.

Does a nice job of accepting a color printed image and will stick well to a smooth surface. Do not leave in the water more than about 20 seconds before sliding off the decals onto your project. Otherwise the decal starts to separate from the backing and you won't be able to get it out of the water in less than two separate pieces. Other than that, works great.

Perfect item that gives a professional look. Was able to personalize golf balls as a gift. I can now use these decals on coffee mugs and glasses to make special gifts.

Excelente calidad!!

This paper is thinner than most other brands but is also very opaque. Clean, crisp, white areas are easily achieved by adding a plain white base decal under the detail decal to prevent dark base colours from "muddying" the white areas of the finished decal.I print using my colour laser printer, or even using the self-serve machines at Staples. Both provide great results.I clearcoat using Mr. Color paints and the decals stand up to this coating very well. I use a decal softener prior to clear coating to help settle the edges of the decals into the paint. All with good results.This paper is easy to use and only requires a few seconds in the water to allow the decal to slide off nicely.Highly recommended.

me gusto mucho la calidad y el servico que me dieron fue super rapidisimo y como lo queria para un regalo todo salio perfecto les doy un 10!!!!!!!!!!!!!!!!!!!

Se despega fácilmente, no se adhieren bien al plástico

Realice una impresión desde una impresora de inyección Epson con tintas de la misma marca y se corrió la tinta