🚿 Power through grime with zero hassle and total reach!
The Tool DailyPressure Washer Hose is a 50-foot, kink-resistant extension hose with M22 14mm fittings, designed for compatibility with major electric and gas pressure washers. Rated for up to 3600 PSI, it features abrasion-resistant construction and comes with a complete quick-connect adapter kit, making it a durable, versatile solution for residential and light commercial cleaning tasks.
J**A
Great hose for car wash
Def a must if you only have the 15ft house that comes with pressure washer. Good quality and feels strong
L**W
Replacement power wash hose
Work as described. Great price. I use it constantly, I only wish I had purchased the longer hose. However, it was still a great purchase.
J**S
10/10 Great item and price
This tool daily yellow hose works great with my 3400psi Simpson ppressure washer. If you are hauling equipment around, a longer gun hose is definitely the way to go rather than a long garden hose. I was surpised at how small the box was that this came in. It won't kink but it will like to stay coiled/easily tangled. Using this with a swivel connection might help that. If they make a hose reel for this it would be unbeatable!Quality/durability: 10/10Flexibility: 7/10 (likes to stay coiled for now, but may improve over time. All hoses will do this anyway)
A**R
Affordable
Good for light use, primarily for weekend warriors.
R**G
Great hose for every day use of your pressure washer. Nice Length and Quality
Great replacement hose for my pressure washer. I have 3100 PSI and works like a charm. No issues whatsoever after several uses. The quick connections are great and make it so much easier to use than the original hose.I'm only reviewing for residential use and not sure how it would help with a more frequent use.
A**E
Leaked and split with first use
The connection leaked and the hose split the very first time my husband used it. Do not recommend.
M**S
Fits great to my Greenworks Pressure Washer
50 ft hose with quick connectors arrived the very next day. Comes with picture instructions. Connected the two black pieces to the pressure washer where the pressure washer hose connects to and the other to the bottom of the pressure washer gun. The other two aluminum finish looking pieces go to opposite ends of the pressure washer hose. Make sure not to cross thread it. Easy upgrade. Takes about 5 minutes total, but with my instructions should be faster. There are two extra rubber ring washers and an extra piece for pressure washer with different connection size.This was for an upgrade hose and connectors to my Greenworks 3000psi electric pressure washer. Hose that came with washer was a little short for my likings. Now it’s perfect. No leaks yet. I will update after a few uses or in a couple of months with status of quick connectors. Quality seems good but can only tell how it is after several uses. Price is awesome.
B**L
Kinks a bit
It's a good, lightweight hose that's a solid value if you use it infrequently and are looking to spend as little as possible. It kinks less than the disturbingly cheap hose that comes with most consumer pressure washer units (Why put a Honda engine on it, then use a glorified drinking straw for a hose?), but it isn't quite in the same league as the pro hoses. If you're a pressure washing fiend, consider the "Hourleey Pressure Washer Hose 50FT, Kink Resistant High Tensile Wire Power Washer Hose, Rubber Wire Braided with 3/8" Quick Connect for Hot/Cold Water, 4000 PSI, Gray" that I also got off Amazon as that just doesn't kink. Or try Flexzilla brand, they've always been solid for me. Both of those choices also have a thick outer layer, not that really thin pvc that always seems to get skinned off by barely touching asphalt or concrete. At least the fittings are good, and this hose does have good strain relief moldings at both ends. The 14mm ends are crimped directly to the hose, unlike the previously mentioned "Hourlee" which has 3/8" NPT threaded ends. Why is this important? Quick Connects fail. O-rings fall out. Drop the hose end too far onto concrete, or have someone run over the end instead of the rubber part, and that QC will not latch. It's far cheaper to replace a quick connect than a hose, especially when you get to longer lengths. But if you're not a pro equipped with a trailer and hose reels, etc., then consider joining up 25 ft or 50 ft lengths when you need a longer hose. You won't be spending all day untangling hose every time, and you won't be dragging 30 pounds of hose out just to blast the stink out of the recycling bin.Pros: Lightweight, bright, coils easily, cleans off easily.Cons: Kinks. Needs unwinding to avoid kinking. Permanent 14mm fittings crimped on. Better choices available.
Trustpilot
1 month ago
1 month ago