12 Ft./3.7M Professional Laser Level Pole with Tripod and 1/4-Inch by 20-Inch Laser Mount for Rotary and Line Lasers, Adjustable Telescoping Laser Pole with 5/8"-11 Threaded Adapter-LP36A

A few months ago I ordered the Huepar 3D Green Beam Self-Leveling Laser Level 3x360. Really nice unit, but I found out trying to get it to an exact height could be a challenge, the magnet on the laser bracket is very helpful, but you don't always have a magnetic surface. I tried my camera tripod, and that worked, but only for about 5ft in height. I mainly use the laser for shelves, pictures and sometimes need to have it a little higher than my camera tripod will go. Then I saw this Telescoping Pole that can work up to 12 foot. After checking out the photos and info, I decided to give this a try. I must say, it is nice and works great. I will describe the best I can. It came in a nice carry bag, this way you can keep all parts together. All the extension poles are made of aluminum, that makes it lightweight and you don't have to worry about rust. Each pole has standard and metric markings, 1/4 inch and 5mm. When you screw the poles together, the marks line up. The tripod is much like a camera tripod, the legs can be extended and adjusted for uneven surfaces. There is also a screw at the top to tighten the stand to the pole, no need to super tighten it, and a bubble level to see when you have the stand level. The bottom pole has a spring and a foot piece to push down on, this is after you select the correct amount of poles for the height needed and use the length adjustment on the bottom pole. Hold the yellow part of the bottom pole in one hand, and the footstep part in the other hand and give a slight twist to unlock the pole to pull out for adjustment, then slight twist to retighten. I mention these things as there were no instructions included. The part that slides onto the pole to hold the laser has a lever to lock it too the pole, The one slight issue I saw with this is when the lever was out, ready to install on the pole, you either had to stick you finger in the bracket to push back the plastic piece that locks it to the pole or when putting it on the pole, you have to tilt the bracket and catch the plastic piece on the pole first. With it unlocked, it should slide straight down on the pole, but this is not happening on the one I have, they could use a spring to pull that piece back to make it work better, or, once you have the bottom pole in the tripod, then put the next pole thru this bracket from the top, it will slide through with ease. Once you have the bracket on the pole, it has a fine adjust, there is a lock screw on the side, be sure this is loose before turning the adjustment, once adjusted to the height, just slightly tighten the lock screw, DO NOT CRANK IT DOWN. There is a top piece to put on the top pole that will rest on the ceiling, but beware, this will do no good on a lay-in ceiling, and if you are using it on popcorn ceiling, it could knock some of that off, so you may want to put the stand in a doorway instead. Overall, for me, this stand should take care of almost anything you need, it is light, portable, easy to put together. I have seen other poles that did not have the tripod, without a tripod, you would be limited to places you could use a laser.

Very impressive. Solid , easy to set up, and truly appreciate the carrying case

Great value and works well

I purchased this to go with our laser level from the same company, which works very well. This really needs to be anchored at the ceiling. If you’re doing anything over about 5 feet high because the legs of this are not as stable as I would like them to be. They need to spread out a little more, but that would create problems in itself of being able to use it in tight places so it’s kind of a catch 22 as to whether it should be a wider footprint or whether this just needs to be carefully set up so that it doesn’t fall over.

Solid. Able to move your huepar leveler just about anywhere that you need for perfect adjustment. Has little level indicators on the stand so you know its level as well. Light weight.

The most important aspect of using a laser level is to set it to the desired height. Over the years, I have used various sizes of tripods and find I was having to stack things to set the tripod on so that I could focus the light at the proper height. Another challenge is what to do when you have to use a level near the ceiling. Stacking things that high can take up a lot of room to maintain stability. This unit allows you to very easily set your vertical height and then fine tune that height and only take up the size of the pole. It does come with a tripod, but have not had to ever use it. It is very easy to move it and set it from floor to ceiling.

The vertical part of the contraption seems to be of poor quality. It’s supposed to extend to give you wiggle room for whatever height you need and mine got stuck after the first use. I had to get my demo flat head and bang it out and I damaged it in doing so. I tried to pull it out with some grips but I’m not sure how it was lodged in there that pulling on it would not work. The pieces are glued together and they came apart and some plastic pieces even broke from the legs somehow. Setting it up is a bit of a struggle but seems to be worth it if you want some sort of consistent level. It’s as heavy as you’d expect and the adjustability is fine. Not sure it’s something that I’d recommend buying though

So helpful for home projects! Has a small learning curve but so great.

I bought this Huepar Telescoping Pole to help me with the install of screws in the Trusses and walls of my new a garage. It was great quality and the price was reasonable. It sure made it easier to follow the laser line when I was using the Huepar Laser Level to drive in the screws into the Trusses. The storage case was a nice addition. Yes I’d recommend the Huepar 12’ Telescoping Pole!

Great stuff overall, but keep in mind there is no option for tilting the laser - this one is designed for straight lines, no tilting, unless you buy an additional adapter.

So far I've used this on a few Job sites. It's pretty good. Quality is ok so far. Fit and finish goes along with its price point. Yes there are higher end stands for sure but this one works well. It Comes with its own travel bag so you don't lose pieces of it tossing it in and out of the truck. Over all so far I like it. Use it when you need it and treat it well it should last quite a while. I've used it with my huapar green laser and it works well. Didn't mount to my Bosch but that's an easy $3 fix with a different screw and it was good to go. Over all I'd buy another one. I like the adjustability of this laser stand it works well at any position and easy to adjust.

Bon trépied, bien fait, vas tres haut. Seul bémol, serait peut être la solidité des trois pattes

This product definitely exceeded my expectations. I used it for mounting cabinets and it worked perfectly with my Dewalt Laser level. Can Mounting from ceiling to floor up to 12’. Various leveling options and fine tune adjustments for the laser level to get that exact measurement needed. The screw together pipes are also very sturdy and not made of a cheap material. It’s very well built and well worth the money!