VEVOR Leather Cutting Machine, 11 x 5.5 in Embossing Plate Manual Die Cutter, 0.47 in Pressure Stroke Leather Embossing Machine, Dual Guide Shafts Die Cut Machine for Various of Materials

Very heavy machine, works well. You need to spend a bit of time assembling it, but overall it’s not to hard. Very easy to use it afterwards

What I’d been doing with a loud mallet and a rinky dink tipping small 4x4 press to punch shapes in leather now seems like child’s play. I literally slid my circle shape and leather underneath with the white pad below & the machine had been pre adjusted to perfectly fit- the punch of the shape was like manna from heaven, quite, perfect, and so refreshing that I wanted to keep just punching stuff. When something is so well made, and looks handsome on your work desk, it’s a tribute to the wonderful people on earth can see and accomplish such a great machine - it’s just oh my goodness

It's big. It's heavy. It's a little dirty (but it's a machine, so that's to be expected). It also comes in a fun wooden crate. It came with one retaining bolt unfastened and the other loose, but was easy to securely attach. All parts accounted for. It includes a rather substantial wrench for adjusting the height of the plate. It appears to be set correctly out of the box so I haven't had to make adjustments yet. The action is smooth with the addition of a little bit of machine lube. I just have to wait for my custom die to come in the mail to really test it out. Great value for the cost of you don't want to drop $1600+ on a manual clicker press.

As you can see by my pictures, the machine did not arrive in good condition. I found it on my driveway with the crate upside down. It appeared that one of the wood blocks which would’ve held it off the ground for a forklift to get under it was broken off. And the crate was barely holding together. Peeking inside the gaps, I could see that the machine was tipped upside down just floating around inside the crate. It was not secured to the crate at all. After removing it from its box and getting it right side up, I had to set about putting it all back in working order. The pillars were totally loose. One bearing was slid partially off of its journal and not seated properly. So after tightening everything up and getting it adjusted level. I was able to set it up to try and use it. The Machine in use actually works pretty good. My only complaint is that there’s not a whole lot of travel. If your die cutters are not all the same height you need to make adjustments in the height of the press plate. Not the end of the world but annoying. I gave it four stars based totally on the Machine itself and did not remove any stars because of the shipping. All in all, I’m happy with the purchase. Luckily, I was handy enough to put it all back together and get it all tightened up square and straight. Thankfully, there didn’t appear to be any permanent damage from the poor shipping.

It's great for the price, considering the sheer size of the work area. However, the striking distance is very shallow, meaning you can only put really flat items under it. The main problem is that the handle isn't long enough to produce the leverage required for cutting on such a massive press. It's almost like they never actually tested it at all. I had to find a 24 inch threaded solid steel rod to use as a custom replacement handle in order to generate enough force to cut, and even then, I am bottoming-out the spring, and it just BARELY manages to cut through my materials. Sometimes, like 1 in 10 cuts, it fails to fully cut. Which is honestly way too often and results in a lot of defects and wasted resources. Despite the issues above, it's still the biggest press I've found for the price point, so there are simply no alternatives to compare to.

the tool is solid good quality! Because the box was slightly destroyed in shipping, for the weight of the tool, the box is weak. the two main bolts were damaged in shipping, a nut that secured the bolt to the metal plate was missing, the other nut was hit and it stripped the threads- NO BIGGIE- still a quality built tool. Solution- remove the two large bolts/anchor bolts, turn them upside down, putting the stripped threads on top, which doesn't matter having damaged treads on the top side. buy two new nuts, slice them in half with a cutting wheel (be careful, use a vice to hold the nut). Secure them on the underside of the metal base plate, tighten the two top nuts and the two main bolts are now secure. at this point your back in business!

This machine more than met my expectations! It's heavy duty yet easy to operate and adjust. Smooth operation and well built. Shipped in a wooden crate and when I went to pick it up, I understood why. For this machine, the price was unbelievable. I couldn't be happier with my purchase. 🎉💯🎊

If i could give this machine a "10" I would. At first I was VERY skeptical in ordering because of the reviews. Well, I am here to tell you that none of the issues that I read about even remotly pertain to this die cutting machine. I am nothing short of over the top happy with it. It came in a very heavy duty wood crate that took 2 UPS guys to unload. I have been cutting out in several thicknesses of leather and it is the BEAST! Better than I expected and I would deffinately reccomend it to you! I have received nothing for my review so it is a honest to goodness review. The price was a deal and because of the deal I was afraid that the machine would be a lot smaller and lighter in weight. But at near 100 pounds I can tell it is built to last me forever. Everything is durable and strong. Go ahead and give this machine a try. You willbe very impressed.

Conforme et fait le job

Received on time, no issues with press. Quality control poor as received instructions for a steering wheel stand. Thank God for YouTube.

Die manuelle Stanze hat meine Erwartungen voll erfüllt. Sehr leichte Handhabung und Leder lässt sich damit wirklich leicht ausschneiden.

Excellent machine, well made and really well packaged. It’s delivered by a two man team who bring it into your premises. I bought this to use with my dies that I use for leather. It is exactly as described in the advert and I am extremely happy with it.

Wheels are off the groove and it's very loose. The amount of money I paid for this, I shouldn't have to tinker with it. It is very heavy however I believe I have a damaged item. I'm not happy with this this