Art3d 3D Texture Wall Panels, Pack of 12 Tiles 32 Sq Ft (Plant Fiber)

These are not super hard to install, but it takes time to align them and for the adhesive to set.They are a hard pressed paper / card board. Means: it does not lay totally flat and need to apply some pressure until the glue sets.The gaps between each "tile" need filled and lightly sanded to make it once professional looking wall cover.While it is not really easy to install, the result is worth it.

That was the first time I tried to accomplish a project like that all by myself. The reviews from previous buyers helped a lot. Most people recommend painting the tiles; however, I left them unpainted, and it still looks good. If you enlarge the photos, you will see the imperfections- the tiles are not alined to each other perfectly, but it is not obvious, unless you want to find a flaw.I used liquid nails to attach the tiles and had to buy a special tool to cut the panels.That was an adventure, but I am happy with the outcome.

This is definitely a great option for the price!My husband and I had a bit of a mess because of the glue that we were using, so that made the process way harder. That was our fault, but the product itself is great! The packaging was perfect, not a single one came defective or broken. They are delicate but sturdy enough. I absolutely love the result and would definitely do another wall like that. If you use the correct type of glue, it should be quite simple to build a wall like this. They send a manual with instructions that I only found after we finished the whole thing, so heads up to that, the instructions are useful!

We love the look of this panel but after all the work I had to put into it I'm not sure its any easier than a mosaic on mesh install. It's lightweight and only needs a general adhesive to be installed, however it didn't fit the measurements of our wall as hoped and we had to cut into the middle of the stone to make it fit. This meant we had to come back and fill and caulk all the way around because there were odd gaps across. It's a sturdy material but it's harder to cut than we expected so it made for some frustrating moments and bent cutters. The 3D shape makes blade cutting almost impossible if you have to cut outside of the trim. It's best to spackle the seams afterward. Installing around outlets is hard because of them being 3D. You need 3D outlet rings and you'll want to caulk around them as well. All this to say is they look really cool but I would not call this a cheaper, easier alternative. It took a lot of work and with all the extra things I needed to make it work I could have bought a mosaic on mesh at a wholesaler and it would have been comparable in work and cost with the size of job we did. I do however recommend the product if you like the look. It really is a cool style

My wife and I installed these tiles in a very small area about 3 feet wide by 8 feet tall and we each had four hours each in it (8 man hours)and we were very accurate with our cuts. The problem is with these panels they are fairly flimsy and when you go to caulk them along the wall they end up flexing therefore you can’t caulk the ends to the wall very easily. If you wish to install something like this buy a full sheet because we will see every single joint once this is painted and it will look really bad. We caulked every joint but they are very visible still because you cannot get these things flat on the wall no matter how hard you try. I definitely would never buy these again my wife and I are both very disappointed. Update when painted they look very splotchy

We chose the natural, non-pvc version of this tile. They were easy to cut with a utility knife. Now painting is a different story. The paint applied easily enough BUT with all the angles painting was difficult. I should've used a sprayer, but I didn't. I tried a small roller and then ended up using a brush because of the many angles and the semigloss paint choice I'd think I was done painting and then discover spots I'd missed.I loved how lightweight the material was, which was imperative when doing such a large area.

Unfortunately the plant based cardboard like material is absolutely not suitable for tropics or humid environment. PVC is possibly a better choice being it is more suitable to the environment but, much more costly.

These are extremely light weight, it’s plant fiber which feels like thick paper. Easy to cut with right tools, probably a lot easier than using the PVC kind. That being said, YOU DO NOT WANT TO GET THIS WET. I feel that it may absorbe and stain if wet. Looks beautiful, specially if lights or LED is shining next to it. I WANT TO BUY MORE OF IT NOW. I don’t think it’s safe to remove from walls if applied with some construction glue like liquid nails. So maybe use double sided tape if you plan on relocating later. Other than that, it’s a great product.

Received very bad quality tiles, matte and glossy mixed and too broken. Don't buy the product. Waste of money

Als TV-Hintergrund und einem gewissen Abstand macht diese Deko einen sehr guten Eindruck. Im Zusammenspiel mit Ambi-Light (in meinem Fall das Goovee TV Immersion Set) spielt der Hintergrund natürlich richtig gut auf! Das Bild wird gefühlt deutlich erweitert und der Effekt ist sehr viel deutlicher, als an der Tapete. Dennoch ist der hohe Preis und die unsauber geschnittenen Kanten ein Minuspunkt. Laut Hersteller wird empfohlen, die Paneele zu grundieren und zu streichen, das habe ich nicht getan und werde das auch nicht tun. Für meinen Geschmack ist es durchaus hell genug. Die Verarbeitung, bzw. das Zurechtschneiden ist mühselig, alleine mit einer Schere (eine gute wohlgemerkt) bin ich hier nicht weitergekommen und musste mit meinem Dremel arbeiten. Vor allem, wenn man kleine Stücke aussparen möchte (Regelträger, Steckdosen, Lichtschalter, usw.) steht man vor einem Problem. Kabelkanäle und die TV-Wandhalterung machen da weniger Probleme, da hier in der Regel ganze Stücke abgeschnitten werden.Insgesamt gefällt mir der Effekt natürlich sehr - der Preis ist mit ca. 82€ aber deutlich zu hoch!

excelente

Installation facile avec un pistolet à calfeutrer et de la colle sur tout les morceaux. Il suffit de mettre du latex pour que les joints ne paraissent pas. Et on fini avec la peinture choisi. Pour les interrupteurs ou prises de courant il faut ajouter des rallonges de boite électrique. Voilà.

Después de la 2nda caja, pudimos colocarlos con facilidad con resistir 5000