Under Cabinet Lighting, 3200mAh Rechargeable Battery Operated Motion Sensor Light Indoor, 60LED Under Cabinet Lights, Wireless Closet Lights for Kitchen (2pack)

Great lights with dimming and motion sensing. Liked them so much I bought a second pair and am now planning on getting a third pair. I use them in the basement and closets. Magnetic back easily attaches to metal and also has metal strips to screw to wood/drywall. Great for occasional blackouts when I need to get to the electrical box in basement. Lights turn off shortly after motion is no longer detected (20-30 seconds). A lot of light for low wattage. I don't even use the hallway lights to my home office anymore.UPDATE: I'm up to 8 of these lights now. I keep finding useful places for them, like closets and clothes hutch. Double sided gel tape (strong but easy to remove) works great with them.

I’ve been wanting to install under cabinet lights for a while but my wife pushed back on the idea. I ordered these motion activated lights for our grandkids’ closet (and an extra set for me).We installed them in the closet and my wife liked them. They’re versatile, with three light settings. They’re super easy to install using the self adhesive metal plates. I like that they don’t just come on but fade in and out. They’re sensitive enough to catch motion from a good distance.Unbeknownst to my lovely bride I installed a set under the cabinets in our 174 year old house and she really loved them. We’re going to get more for those darker areas in the kitchen. The battery life is good. They’re well built and well priced. And the sleek design keeps them hidden from view- until they turn on. The Mark Store customer service is A1.

My microwave is above the stove and the light is blown. I have been searching for a replacement for two months. Any way I found this light on Amazon for a great price. I like the ease of installation and it also has multiple setting. You can set it to come on for motion detection or set it to stay on until turned off. It also has a couple more settings. Really brightens things up so you can see while cooking. Great battery life. Very low profile and looks nice. It is not bulky and doesn’t stand out. Last but not least. The charging cord is very very very short! But the fact it’s mounted by magnets is truly a game changer. Simply grab the light and charge.

At 75 my eyesight is not as crisp and I require more light to see. I put one under my microwave so I can now see my black glass stove. Put one under cabinet between stove and sink. Have two under cabinets over the sink. Wow I can now see what I am doing! Have them set to turn on when motion is detected. Perfect. Easy to recharge, easy to mount. Highly recommend!

They work beautifully where I installed them. Love that they have a motion detector. I ended up ordering another set. I am pleased.

Used in an armoire closet. Extremely bright. Exactly what I wanted. Charge is long lasting. Mounting was easy. Perfect size, nice quality, arrived quickly. Good value

These lights are great!!! Do NOT pay for high end rewiring or anything else. These bad boys stick with magnets that have an adhesive, and holes for drilling or homing them if you please. They are usb chargeable and just an amazing product. I put them under my kitchen cabinets on motion sensor mode only, lasts about a week or week n a half (many of us coming n going) and they charge fast. Or if you have a handy outlet on your countertop you can just plug it in n forget it. I highly recommend these. Apartment life here, but would be great in a camper, closet, basement, or even garage/shop setting. Buy these! Money well spent!!!

Product purchased was the 13-inch, white, two pack. I would definitely buy these again if needed.I was surprised, when I measured this light, that it exceeds its specs. It is pretty rare, in my experience, with battery operated products to do so on Amazon.I fully charged one light. Then let it run at its brightest setting until it died. It lasted a total of 11 hours and 6 minutes. Then I charged it to full from that state. It took 5 hours and 6 minutes. Total capacity to charge was 3325mAh. I'd say that for the first 9 hours or so it was at the full bright setting and at about the 9 hour mark it dimmed to about the 50% setting (still very usable in my corner cabinet use case) for the last two hours before shutting down completely.When the light is activated by motion, it stays on for about 20 seconds. It stays on longer if motion keeps triggering it until the motion stops.The light measures 13 1/16 inches long and 1 3/4 inches wide and using the sticky magnetic plates for mounting, the total thickness is 1/2 inch (about 7/16 inches without the metal plate). The two metal plates that you stick to your surface are 2 5/16 by 1 inches.There is pretty small hole in the metal plate that you could theoretically use to mount with a screw but the metal is pretty thin and the hole is only 1/6 inch wide but could be very easily drilled out wider if needed. Since it is so thin, you would definitely need a flat head screw to try and get the screw head flush with the plate. You could always use a similar or smaller sized plate of your own making as well. The plate is not a magnet, just magnetic. The magnets are within the light spaced about 9.5 inches apart, so you can stick these on magnetic surfaces which opens up all kinds of other applications for these). A couple of flat head screw heads or washers were all it took to support the light's weight horizontally, but they would not do so vertically as the light's back surface is metal (aluminum it seems) and so it slides off the screw heads in that position.I've mounted one each of these vertically in two corner cabinets. So far everything is staying stuck pretty well. Will report back if/when they fall off/unstick.Photos show a USB meter while charging (red light) and when fully charged (green light). The motion sensor bubble lights red while charging and green when complete. Two other phots show the inside of the cabinet during daytime, one with light off and the other with light on. I adjusted the photos' brightness to match what I see with my eyes, to give a realistic representation of before and after brightness levels. Light is mounted vertically on the right wall as shown in last photo (not adjusted for perceived brightness).One 8 inch USB-A to USB-C cable is included that has two USB-C connectors so you could charge two lights at a time. No power adapter is supplied.There are four switch settings: On (always on), Off (always off), Moon Symbol (only motion activates in dark environments) and a Sun symbol (motion activation active even in iight environments). Another button controls brightness levels a quick press cycles to the next brightness level. Brightness levels are stated as 100%, 75% and 50%. There is a fourth level that seems to be a duplication of the 50% level. Not sure what that is supposed to be. I could not get the Night mode to work. Even when shining a bright LED flashlight at the motion sensor, it still motion activated, duplicating the behavior of the Daylight setting (which is what I use in ny cabinets). All 4 of my lights behaved the same way, so I doubt this is just a defect. You can also set the light brightness by pressing and holding the brightness button and releasing at the desired brightness level from 10% to 100%. The light will remember your brightness setting.