Black TUSQ XL by Graph Tech 42mm Flat B0ttom Strat Style Nut PT-5042-00

Nice tight fit in a HB TE52 after a little sanding on the fret board side. Needed a little edge sanding as well. Perfectly cut slots for frets 1 2 3 tuning accuracy. Tuning stability excellent. Worth the cost for a quality upgrade to budget guitars.

I bought a very cheap second hand strat copy to use as a take anywhere guitar. After replacing the strings and adjusting neck tension , bridge action and intonation it was a lot better but the nut action was very high and uneven. I tried filing and shaping but it didn't respond and went bad. After checking the dimensions I ordered this nut which arrived in good time. It was slightly too thick to slip in but after 15 minutes careful sanding it was a firm fit. I didn't use any glue, letting the string tension do the work. Before fitting I wasn't sure about the string height, looking maybe too low for comfort, but after tuning it was spot on. Guitar now very playable. Very good !

Absolutely fantastic, well worth the money. Literally no noise from the top end, no pinging, nothing at all. Tuning has never been so enjoyable. Massive upgrade to the stock nut on my 2013 Squire Strat

It's an easy replacement for a strat nut. Minimal filing and shaping was required to make this perfect.

I recently bought a Coban Telecaster DIY kit with a damaged nut slot and missing nut in a clearance sale. I repaired the slot with plastic wood and used this as the opportunity to try a Tusk nut, it fitted perfectly without any need to alter it and gives the guitar the correct string clearance from nut to third fret, I have used this in conjunction with a set of Wilkinson Tuners and between them both it makes tuning the guitar and keeping it in tune a doddle. I will be converting my other guitars to these nuts when they are due for restringing.

Fitted to Esp ltd telecaster. Almost identical to the original bone nut in size. Only required light sanding to smooth the edges. Tuning seems much more stable after fitting.

Great. Needed a little sanding but now fits in slot perfectly , better than being loose.

Got this for an old Encore strat I got in a charity shop as a mod project. The nut really has made a vast improvement both tonally and with tuning stability. It will need sanding down to fit most guitars but this was relatively straight forward (I sanded from the bottom to get the correct height, rather than filing the already well crafted slots) Very pleased with this purchase and the improvements to tone and stability were more than expected. Would recommend!

Con un poco de trabajo de lima, encaja perfecta en las TE de Harley Benton. Mejara sustain y afinacion. Poco pasta y trabajo, gran mejora.

Nickel à la bonne taille sur ma squier Strat' j'ai dû légèrement poncer les côtés 1/2 mm à peine

I’ve bought a couple of these now. Fit perfectly both times.

Il capotasto Black Tusq Xl è fantastico, l'ho montato su una Squier Affinity ed è perfetto. Non è necessario apportare nessuna modifica, limatura o adattamento, basta semplicemente icollarlo e riposizionarlo per bene come l'originale in plastica. Purtroppo l'unico neo non è stato il prodotto ma bensì la rimozione di quello vecchio: devo dire molto difficoltosa tanto che si è pure scheggiato un pezzo della tastiera vicino alla paletta, proprio in corrispondenza del foro di regolazione della truss rod. Nel tantivo di farlo saltare, spingendolo di lato con un punzone si rigato un po' il primo tasto. Per fortuna non si nota molto. Ho riparato il pezzetto che si distaccato con un po' di Loctite. Non appena il tutto si sarà essiccato a modino, faro' un piccolo intervento di restauro con l'olio e una rifinitura finale con lana di acciaio. Non ho avuto modo di verificare il funzionamento ma visto come si presenta escludo a priori che possa essere qualcosa di negativo, anzi direi tutto l'opposto.

El artículo llegó en excelentes condiciones y perfectamente empaquetado, todo esto en el tiempo estimado que se comenta en la publicación del producto el cual fue enviado desde Japón.