GRAND PITSTOP Motorcycle Maintenance Stand, Portable & Compact Lift Stand Moto Jack, Adjustable Height for Chain Cleaning and Lubrication Easy to use

Works great on my wife's BMW and my KLR650, easy chain maintenance ETC

Very stable, surprisingly easy to use, works wonders, lifted a 450lbs bike easily, doesn’t shake, great value. 10/10 highly recommended

I was able to erect my bike using this. But, it felt unstable and the bike would fall when I try to clean the chain. Others have a base on the bottom. This one has a rubber mat where the lifter would be placed.

You will need a better piece of rubber for the end that touches the ground if you are lifting the bike on concrete or a smooth hard surface. I saved a small piece of tire sidewall rubber for this scenario. I’m surprised how well this Jack will lift most bikes. Get a helper the first time and practice before you actually need it. Now that I have the technique down, I can lift a loaded full size motorcycle. Buy name brand if you have the money, or grab this one and adapt.

Not sure which surface this is meant to be used on, but it doesn't work on a smooth garage floor or driveway where you might be doing maintenance. And it would do terrible on dirt or grass if you're on the trail. It might work well on rough city streets or grooved highway pavement? When I try to use it, it just snaps out from under the rear swingarm. Plus, it really only works on the rear tire. What happens if your front has a flat?

Pretty neat little device. Easily portable and definitely comes in handy when you have problems on the road. Good value for the money.

VERY DISSAPOINTED- BAD DESIGN. NOT SAFE or STABLE. I own 3 bikes and I tried this on all of them. Even tried this on my friends bikes when they rode over. I am using CAPS to highlight the very core of these problems so others won’t make the same mistake in buying this thing. I hate wasting my time and money more than anything. I bought the cheapest, within reason, that I could find that looked good and had good or decent reviews... you will see that there are a few different styles for sale out there. I bought the wrong one ! Man did I learn my lesson fast. The lowest setting makes the locking impossible over the fulcrum and will snap out and drop the bike. It happened over and over The base does not stand even with the ground so in actuality it sits on the edge of the steel channel. SAME WITH THE CRADLE CONTACT WITH THE SWINGARM...SITS ON EDGE OF THE CRADLE NOT FLUSH.. Scrap metal. FELLOW RIDERS....beware. I'll try and upload some pictures .

This is cheaper and much smaller to store than a regular motorcycle lift. I used this to entirely remove the back wheel from my 2020 KTM Adventure 390 last weekend with no help from another person. I can fit this into rear bag on my bike easily to take along on rides. The folding function is more for storage than for when putting the stand into place. Here’s the strategy that works best. Put a 2x4 or something under the kickstand just to get the bike to as close to vertical as possible. Next, lock the steering and then apply the Velcro wrap to the front brake lever. That holds the front tire stationary. Now, with the front tire holding in place and the kickstand down, move to the back end of the opposite side of the bike. Unfold the lift lever (the thing you are thinking about buying) and hold it in your right hand as you push on the top of the seat or panniers to get the back tire off the ground. Finally, place the stand under the swing arm and as vertical as possible so it doesn’t slide against the ground (the included rubber pad helps a lot on concrete). Done this way it was stable enough for me to put the back wheel entirely off and then place it back onto the bike with no assistance from anyone. Now, I must add that this stand unfortunately won’t help much when doing work on the front end of the bike, whereas a regular bike stand will, but for the price and portability this option suited me. Well, that’s about all I have to say about that.

これ素晴らしい

Good price quality. Works fine with my honda cb300r

Meilleure "patente" dans mon équipement de moto. C'est petit et très rapide à utiliser. Huiler ma chaîne n'a jamais été aussi rapide et facile. D'ailleurs, il semble vraiment robuste Un must!

Attrezzo semplice e ben disegnato, permette di sollevare la ruota posteriore per la manutenzione della catena (pulizia e ingrassaggio, non lo consiglio per lavori più complessi). ATTENZIONE: oltre a seguire le istruzioni allegate (frenare la moto con l'apposita cinghia sulla leva dell'anteriore, posizionare i pad di gomma sotto il cavalletto laterale e sotto il sollevatore), occorre regolare la lunghezza del Moto Jack adattandola alla tipologia di moto. Il sollevatore arriva regolato alla massima estensione, che potrebbe essere eccessiva per le moto stradali (il piede resta troppo inclinato e scivola impedendo il sollevamento della moto): per la mia Honda (190 kg) è stato necessario regolarlo alla lunghezza minima (riposizionando il bullone sul foro più basso) e così facendo la moto si solleva senza problemi di alcuni centimetri permettendo il movimento della ruota. Considerando il prezzo contenuto, l'ingombro minimo (che permette di portarlo con sé per una manutenzione veloce), e la qualità costruttiva, ritengo il Moto Jack un'ottima alternativa al classico ma ben più ingombrante cavalletto posteriore.

Ça marche, je peut faire l entretien de ma chaîne sans béquille centrale.