Bolt Extractor Kit Heavy Duty, Lytool 13Pcs Bolt Extractor Set with 3/8 Inch Adapter, Stripped Lug Nut Remover, Easy Out Bolt Remover Set for Rusted, Rounded, Damaged Nuts Screws,with Storage Case

Good quality steelWork as expectedUsed every day on stripped bots with Allen head bolts the Allen hole stripped used these tools to removed screws with strip head.Must For Engineers, Automotive technicians or MachinistsSaved time/ Instead of speninf hour drill & extracting other spirrol extractors or square head extractors; these extractor took me only seconds with impact wrenchThey nicely came in a plastic storage box

Working on old pieces of equipment be it cars, motorcycles, bikes, or even just old A/C units, every so often you have a stuck bolt. You try to impact it off you try heat, you try concussion, and during these attempts you round off the bolthead. SO, what to do next, Well i ordered a bolt extraction kit from amazon, and i use it to get a purchase on the rounded bolthead (this one was on a rusted control arm i needed to replace) i had soaked it in PB blaster and then Bam! i impacted it off using the extractor. These seem to be a bit more aggressive than what i am used to, which is not a complaint by any means. I knocked it on the bolt end (using a hammer of course definitely not the end of my ratchet) and really got it on there. the only downside is i have to use a punch to knock the bolt out of the extractor when i was done, no big deal. Would recommend and i am happy with my purchase. (i have used about 3 different sizes so far and each one was bit into the bolt perfectly and has done exactly what i neede it to do)Would buy again if i ever lost this set.

I wasn't impressed. I have used similar tools in the past, so I'm not a novice with these things. This stripped out along with the bolt head. Made things worse AND become worthless. Returned it for a refund.

I was skeptical, as these are extremely inexpensive, but they did the job(s) flawlessly

As with most tools, my major concern is... how long until I break it.I often find with tools of this nature, you have to push them well beyond the limits of normal tools, and they usually don't live up to the stress.That said, at first use these seem okay, I haven't had the opportunity to really try to break them, but they are similar to most any set you might find at a hardware store.I recommend having a set of bolt extractors, as well as screw extractors... and while this set seems fine it is unremarkable. Useful, no reason to pick this or another, so far.I will update if I break one.

The set comes in the typical blow mold plastic case with the bright yellow slide lock. Inside it has raised letters for marking individual bit sizes. These markings are a bit hard to see with old eyes and low light but easy enough from the side as the letters are high enough to cast good shadows. The bits are heavy and have a hex head for utilizing a larger socket over the top. I like this idea since if you are trying to remove a stripped nut/bolt you obviously need more torque that some of the smaller drivers can provide. All bits are 3/8" drive, the first three bits have a 16mm hex, the next five are 19mm, then you have a 22mm , two 24mm, and the last two are 27mm. As seen in the photos I seem to receive a set with minor manufacturig flaws. One bit was left with a burr inside and another with a small area that did not receieve the finish. Will it effect use, I do not think so. The only hting I would add is a label to the case signifying its contents.

I didn't use the tool as it was used and sold to me as new, so returned for refund

This bolt extractor tool is of high quality and very useful. There are 14 pcs of different sizes in a very sturdy plastic box. These are perfect for DIY tasks.

Essaye à plusieurs reprises et aucun résultat c est nul.

Sono stati utilissimi, non riuscivo a svitare 2 viti per sostituire gli ammortizzatori e con questi ho risoltoTop

Perfekt für den Hobby Handwerker.

My first experience ever with this kind of design. It grips really well. I like all the clear marking of sizes on the heads. Especially like the little case, very organised. Just remember to lay the case down always and not standing it up, all bits will get loose inside the case if you open it standing up