AMANSON PC CASE ATX 9 PWM ARGB Fans Pre-Installed, Mid-Tower Gaming PC Case, Panoramic Tempered Glass Computer Case with Type-C,360mm Radiator Support，Black

This was my Christmas present from my wife and kids and wow what a present it is, i have moved from a Riotoro Morpheus to this new case. The moving of components was fast and easy and the results afterwards speak for themselves This case deserves to be advertised a lot more than it is and with a lot more hype The Pros: The Price for this case is phenomenal, they paid £120 for this case and that compared to NZXT H9 starting price of £170 is an absolute bargain Build Quality for the price is excellent, strong, sturdy and elegant double glass design this case takes a 360 rad in 3 positions top, bottom and back panel, they purchased me a Thermalright Notte 360 AIO, i replaced the Thermalright fans with the case fans so all fans matched and the temps are very when idle 35 Degrees C and Max of 75 Degrees C when on full load the Fan noise is almost none existent, running them on MAX and they are a very low hum, my RX 6900-XT fans produce more noise than the case fans Lighting control is great, if you do not have an ARGB header on your motherboard then you are supplied with a remote control as well as secondary button control placed next to the reset button. The remote allows you to cycle through 12 base colours as well as allowing you to change through 5 speed settings and countless modes. If you do have an ARGB Header on your motherboard then your motherboards supplier will have their own software with a multitude of colour options available. The case allows vertical placement of your graphics card As with every product there are always some cons The Cons: Cable management is not the best, it could do with the shield to close off the cables in the second compartment but there are lots of tie points and if you do it right it looks clean and tidy Pop Outs for graphics card placement, this took me back to the 90's with PC builds, i wasn't bothered with popping out the slots but i know a lot of people like to have the slots that can be replaced if selling on the case etc more ARGB splitter cables as i had to split it 3 times from the motherboard for the AIO Fans, Case Fans and Graphics card and as you see from the picture i couldn't take the cable for the Graphics card under or around i had to cross over because the ARGB just wouldn't reach (i have ordered an additional slitter cable which is long) The fans have no rubber corners so i will guess over time that there will be some noise that will come off the fans as the screws loosen slightly with usage. Finally although you can place your graphics card vertically there is no PCIE extension cable or support arm provided with the case (i will have to look for some aftermarket options if they are available) All in all this case is a top contender and it goes to show that you do not need to pay extortionate prices for a quality product

Based on the reviews, I was not expecting much from this product. I am however glad to say that the product arrived undamaged, on time and adequately packed. The case has plenty of room for all of my hardware, albeit there are some downsides that prevent it from getting a full 5 stars! Pros: - Plenty of room in the "Display" area - Hidden compartment at the back for power supply - Decant build quality for its price tier - Plenty of fans for cooling - Fans are bright, quiet and powerful enough. Cons: - Plastic peel on glass is taped between the two panels, so as soon as you go to build inside it, some of the peel comes away and makes it easy to get fingerprints on the glass before you even get started. In addition to this, it lacks plastic peel on the inner of the glass, so it is vulnerable to fingerprints there too - Despite taking up a huge footprint on the desk, space allocated for cable management is not as big as you would expect. Whilst there is plenty of room to jam it all in, the cable management nerds amongst us would struggle to get it perfect. - Lacks USB C port, which in this day and age would be a nice to have feature Though it has its drawbacks, it is a really good product at this price point, and is a direct competitor for some of the more premium cases on the market at half the price (Though USB C and a bit more cost would be preferable), its build quality is acceptable for the price point, and it does look really good when all is said and done, so if like me you wanted to save some money and still have a good looking case, then this could be a great choice for you!

This case is stunning. It's easy to work with, and the hard drive/sata tray is thoughfully designed. Honestly, looks beautiful! Future ref, it would be good to have the case USB 3.0 motherboard connector 90 degree angled... as straight makes it next to impossible to install, especially with the fans at the bottom where my header is.

case looks fantastic. however there are some poorly design problems. 1st if you have a ATX motherboard you'll struggle to get the bottom 3 fans to fit as the motherboard bottom ports are too close. I solved this by getting angled extensions for the ports. 2nd the vertical GPU mount needs to be higher so you don't loose 2 fans at the bottom. 3rd for the price I was disappointed there was no filter grills on the right side panel to filter dust but solved this by buying a DIY grill kit from amazon but I've had cheaper cases that have them included. 4th is that the bottom fan holes are fixed so it made it difficult fitting fans that are daisy chained and slotted together. build quality is solid though. with a few design fixes this case could be amazing. id recommend this case if you know what your doing with cases but avoid this if your new to building.

Case is very nice indeed but it came with no remote controller and no cable for the lights. So I currently have no lights fans makes a wrecking noise and I can’t even return it now

Had a few setbacks with hardware but finally got my new build finished today and absolutely loving it! Looks amazing and keeps the GPU nice and cool. Used to have my aio in front of case but this setup definitely looks better and also been proven to be slightly better setup for gpu temps as while gaming that is what is being used the most. May even be tempted to do a full watercooling setup in this eventually!!!👌😁👍

I was worried at first my atx motherboard wouldn’t fit but everythink fitted in well looks great perfect thank you

Fans mostly the wrong way. No remote and rgb board corroded and not working. Bought an aftermarket one that has a remote and controls rgb of fans and their speed. I used the 360 thermalright cpu cooler. If you have a big psu then wires can be a little tight. Mounted the gpu side on first but only left a small gap and screws didn't line up so fitted it the conventional way and used an rgb support balanced on the edge of a fan. Only one USB 3 port and no USB C, so the description of the listing is incorrect. Otherwise, it looks good and is quiet

No funciona para ATX.

Metal is a little thin but not in an awful way. Matte finish scuffs easily but paint seems durable. Mine came with broken front glass and amazon got me a replacement case shipped out immediately. I built in the original and swapped out the front glass. The fans are quiet, nice and bright and move decent amount of air but all fans moving air out of the case was a problem. I turned the top fans over to create some type of intake. I did the top fans for aesthetic reasons. To keep the easily seen fan faces showing. Not the best setup for thermals, flipping bottom fans would have been better but would have looked worse. It works well and looks amazing. Gets a lot of attention.

Lots of space for a clean setup. The quality of the case is excellent, with a very sturdy metal case, good quality ports and I/O, cable management compartment, hard drive mounts, and plenty of fans. For an RGP setup it is a killer look. I chose to vertically mount my GPU. I think the back panel metal could have been a little thicker, especially around the PCI ports, as it is slightly flimsy - but it works. The fans provided are of a 10 pin variety, and can sync to aura sync, but it's not obvious how to enable this (push the on button twice to toggle between motherboard and hub control). Due to the 10 pin connection, it's difficult to find replacement parts for the fans. Overall, excellent value.

I couldn’t pass this case up after I saw it. My AMD Athlon X2 needs a lot of room to breathe and this case has it! I actually wanted to put my old setup and first built gaming pc into a really nice case and display it. This case was perfect for it. I’m tempted to get another one to house my main pc. No issues with quality or shipping. Panels are easy to remove. Good cable management. Plenty of space for fans. I did have to drill a few holes for the old sata hard-drive, no biggie though. Only thing was I needed another half inch or so in height to run cables out of the bottom, but I made it work. I ran cables before setting the mobo down. I saw others had this issue before I bought the case, it wasn’t a dealbreaker. Also note, the case doesn’t come with fans. That was okay for me, but maybe not for everyone. Great case, I’d recommend it.

I was excited to get this case. Selling it for $94 and $20 off sounded to good to be true.... Because it is!!! The case came with no documentation. No way to best direct air flow... Ignore the fancy pictures... Every fan is mounted as an exhaust fan. 7 fans and they all blow out... Really??? The tempered glass is the thinnest I have ever worked with. The sheet metal is thin and buckles under too much pressure so be careful So why 3 Stars... The design is excellent... Worth 3 Stars. UPDATE... This case will work with a ITX board but the picture showing the Micro-ATX board staying within the MB tray area is a lie.... it extends 1.5 inches into the radiator water cooling area. If you use a cooler like Arctic it's to thick to fit. Better to buy the ITX board if you want to keep your radiator and fan option to the right of the MB. I originally gave this thing 3 Stars. It's now down to 2. To much of a headache...