Upgrade Heighten Landing Gear Feet Pack (Elastic Cushioning Structure Shock Absorb) for DJI Mavic Pro Platinum Drone

The legs worked great and was able to avoid small grass when landing in a open field highly recommended.

These are great to make your landings safer and more stable, especially if you are in remote locations and landing on uneven surfaces. They help protect your propellers from striking the ground or objects. The rubber feet also don't skid on smooth surfaces like the hood of a vehicle. They fold up neatly with the legs for easy storage.

These are a fantastic accessory! Cheap, installs very quickly and easily, and they perform exactly like they are advertised too do, and that’s something that seems to be a rarity these days.My final thoughts: if you own a Mavic these landing gear are a must have! The extra height they provide not only raise it up enough to protect the camera and gimbal, but they also eliminate the need to have a landing pad for every flight plus these also provide the ability to takeoff and land from/to terrain that would have been previously an impossibility. If you own a Mavic then you know exactly what I mean! As far as the price? Less than $10, all of this combined equal a true no brainer in regards to purchasing this gear. 💯% absolutely recommend 👍🏻

Ordered my second set of these landing gear extensions. They fit pretty well, but lost one of the front extensions on a flight after about 50 flights. I would recommend checking the fit prior to each flight. Love the shock absorption of these and would give them five stars except that they ship from CHINA, not the USA and take a month or more to receive.

If you are still flying a Mavic Pro without this upgrade then you are missing out. These fit the drone like a glove and lift it a couple inches off the top of the grass so you don't need to lug around a landing pad everywhere you fly. When you land the springs in the legs help reduce the shock to the drone body and I would guess that will extend the life of your gimbal. They are compact enough that I can still store the drone in the same case with the legs installed (your mileage may vary here...). Anyway 'nuff said. Great product. Worth every penny.

I really enjoy the look and that these do an excellent job of keeping my drone out of the dirt and high grass near me. The suspension is fantastic and really does a well to give me a soft landing. I do have to say that flying with these on significantly reduces my reception range and so I am only going to be using them for normal/shorter range flights. I am totally able to fold my drone with these installed but the feet are all on one side when folded so the drone sits lopsided when this is done. Would buy them again!

Quality seems ok. The legs lift the Mavic up a few inches which should be much better for grassy or slightly uneven take offs. Front legs slip on over the original legs, they fit kind of snug, but I’m concerned they could slip off during a flight. Rear leg clips on the existing rubber tabs. It feels like it is holding solid. Time will tell! I’ll update this review after I have flown with it a few times.

I bought these because I wanted to have the Mavic sit higher when launching from dirt and grass. These add about an extra inch clearance. I like that they have the springs for shock absorption. The mavic lands pretty softly on auto land, but its nice to have the added protection. They fit snugly and don't seem to affect flying. It's too bad they are black and not a color match to the Mavic. .

The media could not be loaded.  Rightly or wrongly, I've always been a bit skeptical leg extensions for the Mavic. I had one of the original 3D printed sets when I first got my Mavic. One side tended to vibrate off in flight and the other would pull the rubber foot off the original leg. I gave them another go a few months later when I bought some injection molded ones off ebay. They were ok, but the balance wasn't quite right and it was quite easy to tip on landing, costing me a set of blades.These new Anbee ones are a different proposition. First impression is that they're well made. The plastic doesn't feel cheap and there's no rough edges or bits left over from molds etc. The bottoms of all four feet have rubber pads and each one is mounted to the leg by a small black spring. At the front, the fit to the original Mavic legs is firm, but not tight and they push on smoothly. After several takesoffs and landings, with around an hour of flight time, none of the legs have come loose, let along fallen off. The rear feet clip on firmly to the two landing hoops below the aircraft. Previous legs I've tried have actually been so tight as to damage the hoops, but these don't.In use, these work well. The damping effect of the rubber feet and the springs take the edge off the Mavic's somewhat enthusiastic auto landings, which can only be a good thing for the camera & gimbal assembly. The biggest bonus though is the increased selection of takeoff and landing spots these open up. Non-cropped grass, dirt, rocky and uneven surfaces are all much more viable with the extra 5+ cm or so these seem to give when fitted. For this reason alone these are now a permanent addition to my Mavic 'kit bag'. I won't necessarily fly with them all the time, but I haven't found any drawbacks or tradeoffs that would make me think twice about fitting them any time. In an hour of flying, I've yet to see them encroach into shot too, despite flying in winds up to 15mph.You can't go wrong for £5.

Les pieds avant s'emboitent en force dans les pieds existants. Le revêtement souple permet une adhérence suffisante pour éviter tout glissement en vol.Les pieds arrière se clipsent dans la structure du drone.Les essais en vol montrent un fonctionnement normal du drone muni de ces prolongations de train d'atterrissage (pas de problème de montée incontrôlable, comme signalé dans certains commentaires).L'atterrissage dans l'herbe (courte) se fait en douceur et évite l'effet "tondeuse" lorsque les hélices tournent encore.La caméra est elle aussi mieux protégée pendant les phases de décollage et atterrissage.L'effet amortisseur des ressorts n'est pas très visible, mais doit certainement contribuer à adoucir la pose de l'appareil au sol.Je recommande cet article.

Personnellement, c'est du gadget. Pas vraiment nécessaire les amortisseurs. Il faudrait que le mavic décroche à l'atterrissage pour que ça serve à quelque chose. Enfin, ça le surélevé du sol, c'est l'essentiel.

Permet de surélever facilement le drone . Peut se glisser dans le sac avec les drone et accessoires.Top pour un prix modique

Piedi atterraggio Mavic Pro molleggiati. Ben realizzati. Materiale di qualità. Perfettamente compatibili.