WAGO 221-2401 80pc Inline Compact Splicing Wire Connectors | Includes 80pc 221-2401 (2 Conductor) | WAGO Wire Connectors | 221 Straight Inline Splice | Straight Electrical Lever Nuts | (2-Port)

The media could not be loaded.  Great for hard wired ceiling and wall lights that typically have smaller diameter stranded wires that can be difficult to connect to solid 14 or 12 gauge Romex wiring typically found in an outlet box.Whenever I use Wago lever connectors, I always put electrical tape over the levers before pushing the wires into the box. It only takes one little snag of a lever on another wire or the box to disturb the connection. Better to be cautious than risk any mayhem.There is also a “test port” in the center of the Wago connector to verify the connection with a meter. That’s not a feature found on wire nuts.Stranded and solid copper wires are notoriously troublesome to connect with wire nuts. This Wago product holds them both secure despite differences in wire gauge and stranded versus solid wire.Also great for extending wires is a box that are too short. I don’t know how some of the outlets and receptacles I see on jobs were ever connected because the wires are too short.See the photo of the wires coming from the wall box. I used these Wago inline connectors to add 12 inch pigtails to connect a 20 inch “moon” wall scone - see the “moon light” photo.Terrific for quick, easy to remove speaker wire connections as well. The wire grip on the Wago 221’s is as good as a pre-twisted solid wire to wire connection with a wire nut.The small footprint of the 221’s also makes them ideal for tight spots. Great product but don’t use them on aluminum wiring - the copper in the Wagoconnectors and aluminum wire are incompatible materials. Hope that helps!

Husband says they work great, fast and easy to use.

I have to say I have never used these, they are small and compact, they take the place of wire nuts. So quick to connect wires. Just added outside garage lights, you can prep them on your bench, when you install them you just have to connect the wire to the wago and you are done. Love them

the product made my job easy.

These work well and have been really handy to have in my work kit. Saves a lot of extra work and time in some situations. Makes quick removable connections where space or wire length is tight.

These made connecting up a new radio a delight. Especially for small wires and everything worked perfect. Definitely recommend

Thank You.

Make splicing wires easy and a good connection.

Excelente calidad

I used Wago vire connectors before for the light/medium loads, it's quck and easy, when you are on the step laders. Package ie nice plastick box is made of thin material (plastic), mine came with the corner of the plastic box dameged.

Hang onto wires tightly. Narrow and sleek - don't take up much space. They seem reusable if not damaged.

Work pretty good but a little pricey. Buck a piece

I was skeptical that these wire connectors would hold wire tightly. Boy was I wrong I tested them with two spare wires by pulling as hard as possible, with zero wire slippage. 5 stars from me....👍