Leviton Lever Edge 15 Amp Tamper-Resistant Duplex Wall Outlet, 10-Pack, E5325-MW, White

Good: High quality. Lever wire clamps are ingenious, very easy to use - you can almost wire these things one-handed - holds wires solidly once locked, and releases them easily when needed. The levers are even color-coded to make mis-wiring almost impossible. Tamper-resistant guard admits a plug without grief, unlike a lot of TR outlets I've used. UL listed. Good price in the 10-pack. Bad: A bit thicker than lesser outlets; takes some wire management to fit it into a crowded box. Bottom line: Leviton is my go-to brand for electrical fixtures, and these outlets do not disappoint. I was a bit reluctant to try these; electricians always tell you to use the screw terminals, not the push-ins. These *have no* screw terminals, but the levers provide a positive lock and are ridiculously easy to use. I used these to replace three broken outlets in various corners of my house. The only wiring difficulty I encountered is that I had to snip and re-strip a few wires because the lever locks seem to like absolutely straight, smooth copper, and the bare ends I took off the old outlets were neither. Which is best practice in any case, so that's OK. The remainder will be going into additional outlets in the basement, and I am confident they'll work well. Five stars.

These outlets are fantastic! I originally bought them because they’re so easy to install, but what really sold me is the added peace of mind. There are no exposed metal parts that could accidentally come into contact with wires—or with some adventurous little insect that decides my electrical box looks like a nice place to move in. Installation was quick and simple, they feel well designed, and I really like the extra layer of safety they provide. I never thought I’d get this excited about an electrical outlet, but here we are. 😂 Possibly the best invention since sliced bread. Okay, maybe sliced bread still wins… but these outlets are definitely giving it some competition! Highly recommended!

These are really cool. Easy to install and they look great. I didn’t realize that I should pull the ends off before I install them otherwise I have to buy an oversized cover.

Absolutely love these wall outlets. Shut power down, test for no power. Wires - Clip, strip, and install. Extremely quick. Will definitely buy more when I'm ready to upgrade the rest of the house. Look nice as well. Plugs hold better than my original builders grade duplexes.

The lever system is a joy to use for homeowners just trying to replace a busted outlet. You strip the wire the right length per the diagram in the instructions. Open the lever. Insert. Close the lever. Done. Another added benefit of this design is getting out of situations where the wires are short, you can install it effectively even stuck halfway in the receptacle box. Electricians might shrug at this product, but I promise you for the homeowner who doesn’t wire outlets for a living, you will save time, sanity, and the cost is basically the same anyways. Some commenters pointed out the outlet protrudes too far from the wall, but I used Leviton wall plates for $1.60 or so each and they work just great. Leviton, if you read this, I just pulled out an outlet from the 1960s that had the wire strip length impressed into the back in the plastic. That’s so much better than putting it on paper instructions. That would be my one improvement.

Sure you’ll have some boomers saying “that’s a weaker connection than my J hook torque to 8.942 inch pounds” they’re wrong. It’s an excellent product and it saves a whole lot of time when installing outlets and switches. You know you have a secure, safe connection and it isn’t prone to errors like leaving a screw too loose or hooking the wire the wrong direction. Additionally the sides are plastic so no risk of shock when grabbing the sides. These lever spring connections are rated beyond what they say they are, and they are safer and are harder to mess up. Absolutely love them, and the time saved. However, I have 1 complaint to dock a star. That is compatibility with outlet covers. Not sure why they have a thick and taller plastic than standard thin metal on most outlets (the bunny ears) I had a whole bunch of screwless 1 gang covers that didn’t fit , and some two gang they didn’t fit. Same for screw type covers I tried. I had to specifically buy mid size outlet covers to fit and, in my opinion, it seems like there’s no logical design reason for that.

These are top quality and 10 dollars less than big bix stores.

These things make switching an outlet so easy. The clips provide a solid hold and very positive closing, so no way to be mistaken. The only dings I could grant it would be for the excess tabs that I remove at the top and bottom. Unlike a traditional outlet with metal rabbit ears against the wall, these are plastic so it is easy to over tighten and flex the plastic inward. Also, you cannot route out two load wires, only one, so any more will require a pigtail. In the couple of cases where I needed to do that and had no room for a pigtail (why do they make the boxes so damn small?), I used an eaton commercial grade outlet that does not require fishhooks. Anyway, I did my house and am now doing my sisters because these outlets make it so easy.

Excelente producto, el mecanismo de enchufe es super útil, y rápido. Soporta cal. 12 y 14, son bonitas, y elegantes. La caja interior es normal de tamaño. tienen protección contra accidentes. puedes trabajar con los cables cortos.

Replace your lose receptacles to reduce the chance of electrical arcs from high current draws

pretty affordable alternative to the traditional outlets. Not having to use a screwdriver is awesome and to be able to easily and quickly remove it reuse it is great. I am just a DIY'er so not a professional, but these are all I will be using in the future when not requiring ones with usb ports etc. Highly recommended.

Very impressed with the value and quality of the new design! The Wago style wire clips is easy to install! It has extra tabs on bottom and top if you cut drywall too much that can break off if you don’t. It took me less than1min to install and saves room to having to stuff the wires back into box. I’m replacing all receptacles outlets and switches with Leviton!

These are an absolute game changer! No more bending loops, tapping the outside, making sure to tighten the loops the right way, etc. It was so easy in fact I was able to do it 1 handed. As an added bonus for an amateur diyer, the plastic at the top and bottom doesn’t permanently bend as easy as the traditional metal ones, So if you over tighten it won’t permanently deform and have to be bent back to sit flush with the plate. The connector between the two hot connectors is accessible in case you want to have one of the plugs on a switch. (In the video the plug used to be half on a switch, but we got rid of the switch). Note for the screwless wall plate, the top and bottom tabs had to be snapped off. For only a couple bucks more than the traditional ones these are definitely worth it! Update: I have since used up the whole box updating outlets in my house and just ordered more! These make it way too easy!