Lisle 39960 Ford Transmission Oil Cooler Line Disconnect Set

Used the 1/2" and it worked great. Slid on one line fine. Pushed it in. Followed advice online to push the line in and then work it out. At first it didn't seem like it was working but constant tug and slight wiggling and the line slowly made it's way out. The second line seemed initially more difficult because the tool wouldn't fit by a miniscule fraction. I tugged on the line enough to get the tool to fit and it then came off as well as the first.

Perfect for the job.

Even thought it looks kind of weak, it gets the job done, I would recommend it, just can’t beat the price!

This tool is needed to change the external transmission filter on my 2008 Ford F-250. The filter is an ATP B-359 sold by amazon. This is an external filter. This tool is for pushing back the locking devices on the transmission fluid lines.Due to a hand injury I could not change the filter. The mechanic at the shop I paid to change it accepted my offer to use my tool. He had a plastic one. He liked mine so much he ordered one from amazon as well! I read the reviews prior to purchase and note here that one review was bad because the tool failed. I can not say for sure, but it may have been operator error. Mine worked perfect. I have used many Lisle tools over many decades and have never been let down. I am a retired large aircraft mechanic and have worked on cars and trucks for over 50 years as well.

Worked very good !!!!!

I used these for transmission line removal on my radiator. Works good. But you really can only use them 1 time.

I saw this tool being used on YouTube and gave a link to purchase this. I bought this as a backup. I took my truck to have radiator and water pump replaced and the mechanic said he didn't need it because he uses split copper tubing. His method worked great on the bottom line but he was stopped cold on the top line After 30 min - I said 'mind if I try this tool' and he said 'might as well it not coming off for me'--15 second later I had the line off. I gave him the tool and he gave me a discount.

I wound recommend these, but I will also tell you to buy the metal version. On some fords, the transmission clips are rugged and the plastic tool can’t seem to retract the clip fully.

Fonctionne très bien pour tuyau de refroidissement de la transmission ford escape 2010.

Llegó en tiempo y forma y justo en el momento que los voy a ocupar para realizar un trabajo

I got this for a 2008 Ford F-350 transmissions filter lines. To change the filter. It worked in the end. For first timers: you attach it around your pipe and firmly push the narrow part into the pipe fitting. It forces a circular split ring off the pipe and into a recess within the fitting. The pipe will pull out with your other hand. Keep firm pressure against the tool to hold that split ring still in the fitting as the pipe slides out. There’s a raised bump on the the pipe inside the fitting, which is held in by the split ring. You must get that ring off the pipe and into the recess. Do not twist hard. It will break. Firm and direct inwards. Use WD40 first and during to blast all the grit out. That split ring needs room to move into its recess in the fitting. It’s full of grit.

Performs as it should very satisfied with the tool

Excelente servicio gracias