2 Meters Of 8mm Stove Rope & 100ml Adhesive Pack - Replacement Seals

USED ON MYWOODBURNER. IDEAL FOR THE JOB

Great fit for our Morso Owl, I initially bought 10mm rope but this was too wide and stopped the door shutting.Fitting is easy,Remove old rope,Use a wire brush or similar to clean out the old groove.Apply glue and place rope in groove.I tried apply glue to door and to the rope, as I hadnt removed the door and placed it horizontally I think on balance placing glue on rope worked a little better. YMMVIt was a little fiddly but nothing too frustratingReview by Snikom husband of MoGin

The rope does what it is supposed to do. Need to change it more often to ensure maximum efficiency of the stove.

works well but you need to be careful with the glue as it is very runny.I took the door off and removed all the old rope. I then carefully poured the glue into the channel all the way around. Don't over fill the channel.I then laid the rope carefully on the glue so that it soaked up the glue and cut to length at the end. I then left the door on a newspaper for 24 hours before refitting.I think next time I will use 6 mm rope as the door is very tight closing.

Rubbish glue doesn’t stick where u want it to

good product easy to fit does the job well

Great price and plenty of glue. Use tape to keep rope on after you've glued. Put a towel down. It gets messy.

My lower door on my wood burner required a new seal . Both items were just the ticket to ensure agreat door seal, the efficiency of the stove is a whole lot better.