Rhino RackCap/Topper/Canopy Complete Roof Rack Kit with Quick Release Legs, Bars, Some Kits Included 65" Tracks

Liked the looks, quality and price. Hauled a large bed frame head/footboard that wouldn’t fit in the truck bed From AZ to WA (1700 miles) without any issues. Plus was rear ended in OR destroying our camp trailer and it all held tight. Drove many miles with high winds and rain no leaks detected inside camper shell. I would say it is extremely sturdy.It’s a little noisy but not excessive and that can be reduced by removing the cross bars when not in use. Removing them is the only major drawback, the squeeze mechanism to release each side of the bar is extremely stiff making it a real struggle to do. Plus lots of plastic parts in the release/ looking mechanism so don’t want to use a lot of force to remove.Lots of thought and engineering went into producing them and lots of thought went into installing them, had a mechanically minded friends help. Read all the directions, check for all the parts some are tucked inside the cross bar tubes. We pre-assembled the whole unit then carefully placed it on top of the camper and adjusted it from there. We were careful to hit the single wall outer edge of the camper as there was a double walled center section for structural integrity of the shell. The supplied bolts wouldn’t have been long enough and not sure of any compression issues associated with the double wall. All done before we drilled a single hole.Installed on a Leer fiberglass camper shellNo regrets on purchasing, good price sturdy high quality rack.

This "kit" came as 2 different items, with 3 different sets of directions. This makes It virtually impossible to notice that you are missing hardware and tools. Once you get the main frame drilled on to your truck and go to install the mounts for the cross bars, this is when you will realize that you are missing a critical tool.After spending an hour machining and manufacturing your own tool to just press forward, you will get to the point that you are mounting the crossbars and find out that you are missing specialized hardware.I contacted the seller, and while they are incredibly apologetic for it, after weeks, it is apparent that they are unable to do anything to solve this problem.Their first solution was For me to return the product. That is absolutely not an option, as I had to drill holes into my truck topper that the frame is now Covering and filling.Their 2nd solution was to offer me a partial refund for me to go buy hardware that would work to put it together. That is also not an option, as it is specialized hardware, and installation of anything else will Void the warranty of the product.So, here I sit, weeks later with a frame drilled and installed on my truck topper, crossbar mounts that can install, and no way to install the crossbar. .This cost me the ability to take critical needed gear on a hunting trip that I had planned for months.Thanks for ruining my hunt With your incompetence.

When I bought this I was confused about how to adapt it to fit my Jeep Hardtop. This is a generic kit for a pickup hardtop or a van but the instructions inside didn't really explain it enough for me. I called Rhino rack and they were very helpful. First, they have a different kit for my Jeep(!) but he helped me modify this kit to work; I cut the aluminum tracks down to size, cut the mounting studs to 25mm so I didn't hit my head on them, and used the spacing recommended in their Jeep kit instructions to drill the track mount holes. The rest fit right together. Also, in the Jeep instructions it said the weight limit is only 60lbs vs. the 250lbs rating in this kit. I asked him about that and he said the jeep top is not too strong; they had tested a standup paddleboard on a Jeep TJ fiberglass hardtop and it failed, so he recommended I tie the front of the board down to the hood, otherwise pressure on the front of the board would push the back of the board down and crack my hardtop. Though I was stressed to start with, I ended up very happy I went with this kit. It's very easy to transport my gigantic 12' SUP down to Kalipaki.

First off, this is a great price for the entire system, Tracks, mounts, and bars, cheapest I could find by far. It all mounted up exactly as mentioned, took a little bit of time getting it all measured out, holes drilled and mounted, but not too bad and worked like a charm. The thing I really like about this over my Thule bar rack I have on my other car is the great design of being able to remove the bar system so easily, and I mean so easy, about a minute and you can have the bars and mounts off and just put on the foot caps, great for when you go to a car wash or if you just don't want the bars on all the time, really great design. The only thing we'll have to see is if over time, the locking system of the bar mounts loosen up from taking them on and off, we'll see...Overall, really impressed with the price and the product...

EDIT: After dealing with some QC and a little bit of customer service issues, I found everything necessary for this product. Very happy with the final results. You'll need to be very "handy" to make it work.The product is very well designed. I feel comfortable leaving it on my roof with the safeguards designed. The installation could have been fairly easy (with 2 people, will take several hours with 1) if I was sent all the parts necessary with a guide on how to install. YouTube, unfortunately, was my only solution in which I had to figure out the process piecemeal. The paper guide that was sent with the product was for the wrong product and left me with a parts list that was misleading.If you get all the right parts and know how to set up this product already, I highly recommend. Otherwise, you might also be left fairly disappointed by the comprehensive customer experience.

Had to trim to fit but the end caps go right back on after cutting. Worked for my 2016 GMC Canyon long bed topper.

Product was exactly as described and price was very fair. Rhino requires one less piece when attaching to roof rails so this lowered the overall price even more (integrated leg and foot). Highly recommended.

Opened box, nowhere near enough parts to even resemble a roof rack!

These are very good roof racks for carrying ladders or your fishing boat. Very happy with them.

Absolute favorite roof rack I ever had