TECHGEARScreen Protector for Xperia Z3 - GLASS Edition Genuine Tempered Glass Screen Protector Guard Cover Compatible with Sony Xperia Z3

Very simple and easy to apply. Clear, accurate instructions. Went on better than expected and I am very happy with the results. One can hardly tell it's there.Some tips on the installation:1. Make sure that you've cleaned your hands and then the screen very well before continuing onto the glass.2. Attach the strips to hold whilst aligning the glass to the screen and BEFORE removing the backing film have a few practice attempts at aligning the glass correctly on the screen taking note of your visual cues for getting the glass lined up correctly. Make sure that the glass is nicely balance when you are holding the strips and doesn't want to twist. You can move the holding strips to get a better position for the balance of the glass.3. When sure of your accuracy, remove the backing strip (without touching the part that was protected) and lower the glass slowly into place whilst noting your lining up cues.4. Just as the glass first contacts the screen, pause and move slower, letting the glass 'relax' onto the screen. This should result in a minimum (or even none) of the mini-bubbles appearing.

Great product, all the way from delivery to product package as to protect the glass inside. The thickness was superb and sturdy, thats all you need to protect the front face of the phone from scratch and damage. Please note that upon installation of the tampered glass, make sure to be methological in removing small dust/particles. i used plenty of clear tape to remove even the smallest dust and if possible do it in a room with less interruption as dust will be your main problem and not the fitting.the only issue i had was, the case cover i have was pushing/peeling the corners and sides of the glass that i have to cut some portion of the rubber to accommodate the glass, it was really a tight fit so now im thinking of getting Case Mate Tough Case to rest this issue.Anyway, it is a great product for the price and quality, highly recommended...dont hesitate.

Just received 2 of these to replace my old screen protector.I've had so many protectors by now, I'd say I know what I want.The Kit:+Comes with alcohol wipe, microfibre cloth, stickers to handle your screen protector and another sticker to remove dirt from your screen.+There are little stickers which you can put on your screen protector which allows you to handle it once youve taken the back off the sticky side and angle it on to the phone just perfect. They really helped me get it right, so its on very straight.-The instructions are daft. I'll post better instructions for you at the bottom of this review. They arent in the right order and if you follow them, youll likely get dust under your screen or scratch your screen a little.The Protector:+The dimensions it is cut to are perfect. The screen protector fits bang on and even under my official Sony case for my Xperia Z3, without overlapping.+It is a stiffer protector than most. The edges dont peel up because of this.+The surface is really smooth and clear. It doesn't grip your finger while swiping.-It's very shiny. If you live in a very sunny place, this is super reflective and may be difficult for you to see the screen. This isn't bad design, the protector is equally shiny as the normal screen is. Just something to consider.Right, the instructions tell you to wipe the screen with the alcohol wipe, then the microfibre cloth, then put the stickers on to the protector, then apply the stickers to the screen, then remove the film from the back and apply.This basically asks you to scrub the screen with the wipe, as the wipe isnt a miracle wipe, it takes some real rubbing to clean the screen. The tissue its made of will grip anything it picks up and scratch the screen. Then you use the cloth. There, screen clean.Then it asks you to spend a few minutes putting stickers on the protector, all the while, dust is settling back on the screen again.Once you get to put the protector on the phone, itll have bits of dust under it and maybe a scratch or two.IMPROVED DIRECTIONS:1. Put all the handling stickers on the protector, one on each side, one on the bottom.2. Remove your phone from its case (if you haven't already)3. Use the big, round sticker to remove any grit and dirt from the screen, ensure there is nothing left.4. Use the alcohol wipe without unfolding it, gently, in circles, rub the screen, then open the wipe and use a clean side and continue. Keep doing this until the screen looks good. Allow the alcohol to dry from the screen before the next step.5. Use the microfibre cloth. Do not use the side which was resting on your desk or youll just put dust straight back on it.6. Peel the back off the screen protector.7. Using the sticker handles, line up the top and bottom speaker/microphone holes and place the screen protector down.8. Flatten it out, working from the middle, work any bubbles to the edges of the protector.Hey presto!

I've brought this product many times before, and return to buy this product because of the quality if protection it provides my phone screen. However sadly my purchase of this item this time round has forced me to leave a view. The product is great, however this one came cracked. I had not bent the packaging, abused it in personally but when I opened it I noticed a small cracked between the top if the tempered glass screen and the hole made for the too speaker. It's small, but it's there and I'm disappointed it has happened, it has never happened before with my precious purchases of the product and I'm sadly disappointed.

Cut to just the right size for the screen without a case and goes on easily enough. Took it of twice to remove a little dust and was able to put back up without snapping it or losing and adhesion to the screen.It will mean you have to change the cradle size if you're using the magnetic dock but it does fit one of them.

G

Really pleased with this protector. Arrived really quick and very well packaged. The instructions for fitting were clear and easy to follow. I liked the extras that it came with. Unlike my last one it was perfect for the z3, the previous one didn't have all the holes. I found the little guide stickers really useful for placing the screen perfectly aligned as opposed to my usual faffing about and ending up with air bubbles!Hopefully it'll last longer than the previous one, but when I need one I'll definitely buy the same again as it is a much better price and good quality. Definitely recommended.

Parfait