Compact Electric Palm Router 710W, Variable Speed Wood Trimmer | with 1/4” & 3/8” Collets for Wood, MDF and Laminate, 220–240V, Model 101748

A good, well- functioning little router handy for detail jobs. I got this specifically to cut the binding channels on an acoustic guitar, for which it worked perfectly (combined with the tilting base accessory and a good quality rabbeting bit with interchangeable bearings that cost nearly as much as the router- don't skimp on that!)) I can't comment on the durability as yet as I've only used it for that, but I was impressed with the adjustability and the quality feel of the machine.

Bought this to fit a new b-fold door to our en-suite. I have a plunge-router but got this for ease of use, and it's been brilliant. I opted for the round base so I could rotate the router as I worked, to get better visability of the cut; this wouldn't be possible with a square base. This is only my preference, though. It's not too loud when in operation. I actually forgot to put on my ear-defenders for a couple of cuts, and didn't really notice, to be honest; it's noisy, obviously as it's a power took, but not uncomfortably so. I set the router speed to '3'. which seemed fine, as I was cutting a relatively softwood door. The depth adjustment wheel on the supplied collar worked well, although the scaled rule printed on the side was not entirely useful (I used vernier depth gauge to check the bit depth, but a steel rule would work just as well). The quick-release depth locking-mechanism did the job, and it was a doddle to remove the collar. I used the offset edge tool, when recessing the hinges, and it worked well. Changing the bit was easy, too. Far less hassle than than changing the bit on my plunge-router. I had to make a freehand cut to fit a flush-handle, and it was surprisingly easy. The router is not too heavy to move (although I would recommend using two hands for added control) , and it didn't try to jump ahead as it was moved about. NOTE If making a deep cut : TAKE YOUR TIME! I had to cut out a 12mm recess, and (through lack of experience) went straight to that depth. The router obviously struggled, as too much wood was being taken off in one go. Once I dialed it back and did several runs, each time increasing the depth by 2-3mm, it was far easier. Overall, I am extremely impressed with this great, little router, and for forty quid, it's a real bargain.

Picked up two of these routers based on reviews, videos etc that spoke highly of them. Now of course there was negative and neutral reviews so I went into the purchase not expecting an amazing high end tool but something half decent and better still, two for just over €100 delivered. The Makita router it's based on (and obviously a far superior machine) was for sale locally at €165! The routers were delivered before the delivery date....super! They are nice heavy machines, there is a feeling of a level of quality with them......just don't look too closely, they are, litteraly, a bit rough around the edges. The plastic and metal castings could do with a bit of tidying up but in reality this won't affect the performance surely?! I bought two as I need them for specific tasks in a production so they'll be assigned a cutter and used for that task alone. They work fine, speed is good, lock mech on the base is solid etc although I have noticed with one of them the bit does seem to be slipping outward ever so slightly in the collet (they are supplied with 1/4" collects fitted) using Trend 1/4" bits. I'll have to take a closer look at this one, and see if this can be remedied. Overall, yeah perfectly fine for the price, these will not get hard or heavy use, I have other routers for that so I'm happy with what I got for the monies I paid 😎👌

For an affordable palm router, thing machine is a best... and I used my last one for almost 5 years before it finally died on me. I actually used mine as part of my router bench and it had extensive use throughout the years. Thankfully, Katsu still sell them so, got a new one in my basket already. The height adjustment is smooth and the clamp is rock solid. Would highly recommend for hobbyist and professionals alike.

Over the long term, the KATSU Electric Wood Hand Trimmer Laminator has proven to be a reliable and versatile tool for woodworking tasks, this trimmer consistently delivers precise and efficient results. One of the standout features of the KATSU Wood Hand Trimmer is its versatility. With the ability to trim laminate, wood, plastic, and even soft metals, it's a versatile tool that can handle a wide range of materials and applications. The adjustable depth guide allows for precise trimming, while the 1/4" and 3/8" collets provide flexibility to accommodate different bit sizes. The trimmer's compact and ergonomic design makes it comfortable to use for extended periods without causing fatigue. The lightweight construction and rubberized grip ensure excellent control and maneuverability, allowing for precise cuts and smooth edges every time. Durability is another key strength of the KATSU Wood Hand Trimmer. Constructed from high-quality materials and built to withstand the rigors of daily use, it feels solid and well-made in hand. The powerful 220V motor provides ample cutting power, while the durable components ensure long-term reliability and performance. Furthermore, the trimmer's compatibility with a wide range of router bits and accessories further enhances its versatility, allowing for customization and adaptation to specific project requirements. Whether I'm trimming edges, creating decorative profiles, or routing grooves, this tool handles each task with precision and ease. Overall, the KATSU Electric Wood Hand Trimmer Laminator is a top-notch tool that combines versatility, durability, and performance to meet the demands of woodworking professionals and hobbyists alike. Whether you're working in a professional workshop or a home garage, this trimmer is sure to become a valuable addition to your toolkit.After 5 years still going strong. katsu and Mikita are very similar.

I bought this for a little lightweight work in MDF - mainly some biscuit joints and a bit of rebating. It managed these with ease and even managed a quite deep rebate with a larger cutter that I would normally have chucked on my bigger router. Comes with a rack and pinion adjustable base, fence and transparent dust collection cover as well as an offset edge guide bearing and a pressed steel spanner. The router sits comfortably in the hand and seems well balanced. Easy to reach the switch and speed control. The base is easy to remove, adjust and secure. Runs smoothly - no obvious runout issues. Quite loud but no worse than most small power tools. Cable is good quality, flexible and reasonable length. Cutter change is easy with an easy to access spindle lock. The supplied spanner is a bit rubbish but adequate. On the downside, the casting of the body is slightly rough in parts but is concentric and solid. The rack and pinion mechanism could be smoother but I have not had any problems setting and adjusting depth. The clamp mechanism seems secure. There is no soft start but that would be surprising on an item at this price point. Comes in a cardboard box with an insert but no tool storage box. Pleased with my purchase and think it will be more flexible and useful than I was expecting.

Very good little palm Router good value

Do not be put off by the price or the wired connection. This is a very good router and will save you a lot of cash. I had never previously used a router, used it to rout a hinge. Delighted with the results thus far.

The product is great but Amazon deliveries are so slow even after paying extra for Prime

Excellent machine. Very well made, feels solid, largely metal construction well assembled and delivered ready to use. Accessories also well made and dust port works well. The 3/8" collet is not a common size for router bits so an 8mm collet would be more useful. Well packed to deliver the items in good order, the Hand Trimmer is extremely good value for money and I highly recommend it.

Dass der Kantenfräser baugleich mit dem ca. 200€-Modell von Makita ist, wurde hier ja schon mehrfach erwähnt. Ich benutze ihn vor allem, um an Plattenwerkstoffen die Kanten abzurunden und da geht er durch wie durch Butter. Der Stromanschluss ist kein normaler Schuko-Stecker, sondern ein ausländisches Modell (englisch?). Das spielt aber Oberhaupt keine Rolle, denn von der Ersparnis kann man sich ja einfach einen passenden Reiseadapter kaufen oder einfach das Kabel abschneiden und einen normalen Stecker in bester Kellerwerker-Manier selber dranfriemeln. Entgegen aller entsetzter Aufschreie ("Kannste doch nicht machen..."/"Wirst Dich umbringen!") bin ich auch nach häufigem Gebrauch noch immer am Leben und erfreuen mich bester Gesundheit...

Consiglio sicuramente l'acquisto a chi vuole una buona fresatrice ad un altrettanto buon prezzo. ATTENZIONE però ai colletti in dotazione: sono due, uno da 6,35mm (1/4 di pollice) e l'altro da 9,52mm (3/8 di pollice). Come ho risposto ad una precedente domanda, se avete già le frese con gambo 6mm non sarà possibile serrarle con il colletto da 6,35mm! Se vi occorrono i colletti da 6mm e 8mm, si possono acquistare anche direttamente dallo stesso venditore. Se invece non avete il set di frese, a questo punto consiglio di acquistarle con il gambo da 1/4 di pollice.

Non avrei mai pensato ma è di ottima fabricazione e nella qualità dei materiali molto simile a ciò che somiglia della marca più blasonata Sono un pò meno accurati gli accessori ma va benissimo per quel costo Bisogna procurarsi un adattatore per la presa e prendere gli adattatori conici con misure in mm in quanto quelli in dotazione sono per misure inglesi, si trova tutto su Amazon Penso di prenderne qualche altro, si proprio qualche merita