Raidmax NV-R120B High Quality Airflow MSI Aura Sync Adjustable Quiet Color LED RGB Case Fan for CPU Coolers and Radiators for PC Computer Cases

The media could not be loaded.  There's not a lot of information to be found about these fans, so I'll try to help you guys out.These fans have 2 cable headers, one has a 3 pin fan header connector and a molex connector to power the fan. The other has a 4 pin female, and 4 pin male connector for the RGB. The female of one fan plugs into the RGB header, the male plugs into the female of the second fan to daisy chain. I would have liked to see a connector built into the housing, rather than double headed cables. I placed a piece of electrical tape over the unused male end of the RGB connector, as they don't include a cover, and the pins are out in the open, ready to short out on your precious motherboard.THESE CABLES ARE SHORT. They barely span the height of an ATX motherboard. Pick up an extender cable for the RGB and power if you think you'll need it. I used the molex connectors.The fans pull air from the RGB side. I wanted to get them as intake fans, but had to use them as exhaust, because if you flip the fan around, the RGB ring is against the case and wouldn't look very good.I have an Asus motherboard equipped with Aura Sync, and the colors are correct. In the Aura Sync program there is an option to calibrate the RGB header. The fans light up different colors and ask you which color you see. I didn't have to use this because they already worked correctly.I only have one RGB header, and daisy chained like this, the fans are not individually configurable through Aura Sync. They both light up the same.The fans are not any louder than the NZXT ones that came with my S340 Elite case, although there is slightly less airflow.The fans are nice and bright. I'll attach photos of the Red, Green, and Blue presets in the Aura Sync software, but I had to reduce the brightness to get the colors to show up correctly on my phone's camera. I'll attach a video of the color cycle feature in Aura Sync as well.The LED covers are frosted and diffuse the light pretty evenly, its hard to distinguish where each LED is under the cover.If you have any questions, reply to this review and I'll tell you anything I may have missed.Would give it 4 stars, but for the price, you can't beat these. So I gave it 5.*Edit*I've had these fans in my case for a little over 2 years, and they still work great. I turn my computer off when I'm not using it, so keep in mind that the fans are not running 24 hours a day.The RGB still works great, and the fans are still roughly the same volume as they were new. I don't hear any rattling or anything alluding to a failing bearing. Still happy with these fans.

While the air flow is amazing for a cheap fan, the fan fails the main point, the rgb. I'm going to be fair and say maybe I just got a faulty unit and I'll return it and buy it again and see if my luck is any better.The problem with my unit is the colors are super inaccurate, yellows are green, whites are blue and some teals and cyans look just plain weird. My asrock ab350m doesn't have the most advanced rgb software so I'm limited to tweaking these fans. And i pretty much need an asus board to make it work. 😒Update I don't have the time rn especially with school and work I can't buy it again I'll just have to see for what other reviews say if it was just my unit then maybe I'll buy it again.

Fans performance is just fine. Better than my stock case fans. The LEDs can be controlled the using ASUS Aura. They are not addressable therefore have limited execution of complex effects like comet, starry-night e.t.c. The LED colors are fine and I have no other complaints other than the color being impossible.Word of warning: If you wish to mount these fans at the top of your case. Get ready for a lot of returns or find other fans. Like another one of the comments said, quality control does not seem to be their strong suite. The fans have a distracting rattling/whine when mounted upside down. I just purchased my 9th fan prior to this review. 2/3 fans that I mounted on the top of my case have developed that distracting sound.

The media could not be loaded.  Just bought one to try it because of the price, it is much much better than I expected. It is very easy to connect. Connect either a 3 pin to motherboard or 4 pin to power supply to power it up. And a 4 pin RGB connector to motherboard. Looks very nice in front of my case, I will buy 2 more to make it 3 on my case.I use my Gigabyte RGB Fusion software to control the color of the fan. The color on the fan is perfect, you can make it any color you want on the software.

The fan works well, but the LED plugs do not fit any other connection inside the case. If you have existing LEDs inside the case like my son does, pay very close attention to the connection types. This can replaced a Raidmax fan that was nearly identical. The power connection for the fan matches up fine. Don’t assume the LED connections are going to match. Very disappointing.

The media could not be loaded.  Good fan. Colors are great. Color is only on one side of the fan. Fan pulls air in through the RGB side. Could be cheaper😉

Ordered 6 of these and 2 of them came without male 4 pin attachments. Disappointing Q/C, but the fans work as intended otherwise.

The fan itself is fine, but the one that was sent is broken. It doesn't show up in Aura Sync, but I can edit the colors. HOWEVER, only the blue LEDs seem to work (see photo). The fan is on the left side as an exhaust fan. 2 stars.

los ventiladores se sincronizaron perfecto con mi B450-F strix lo unico que yo cambiaria es que los cables de RGB fueran un poco mas largos , fuera de eso funcionan perfectamente , solo necesitaba 2 , pero los compraria de nuevo !

Excelente calidad y fácil de conectar