DIYAH 12 X 48 Inches Self Adhesive Headlight, Tail Lights, Fog Lights Tint Vinyl Film (Green)

I'm updating my review and rating. Originally thought the film was not working properly. What I discovered (and found out is mentioned in a handful of reviews) is that there are "two" protective layers to be removed. That detail is not mentioned in the instructions provide on the Amazon ad page (there are no instructions included with the product). I believe my first experience failed because I didn't remove the "outer" film after installation. Found the following video which highlighted this for me (Note: this was a link on the ad page when viewed using the Amazon app, but does not appear on web page version): https://www.amazon.com/vdp/7cb4501e781b4b5eb51939a54b4a1c87 Once I reapplied the film, and removed the outer protective layer after smoothing, it has stayed in place like it should. So changing my rating from 3 stars to 5 stars. ********** Original Review Installed this filter on the lens of a flat led light to reduce color temperature. Had high hopes this would work. But because the film is so tightly rolled when it arrives, it never relaxed and eventually uncurled right off the light. Maybe the adhesion on my particular roll was old and didn't have the strength it should have but unfortunately it was disappointing. Maybe others have had better luck. Can't recommend based on my experience and application.

My first time using this wrap so bear with me on the review. This stuff is nice. Very clear and easy to install. Covering lights is not as easy as I hoped it might be and I ended up with mine not covered at all. For me the turn of the light..it's curves...were much harder for me to work out....I would say it's probably a heat gun if you have one but I'm not experienced at this at all so I just gave it my best shot in short and then let it be. It's worth practice as it costs at estimate $250-$375 to have my head and tail lights covered and if you buy 5-6 rolls of this wrap and use your old lights to practice on first I gaurantee you'll be able to wrap head lights and tail lights exactly like the shops. I say that because it's true but the keys to custom and professional and shop jobs is that they want to find a key way to lock customers in to thier service. That's unfortunate because it adds confusion to the diy consumer who wants to be able to do a good job and protect thier investment and secure thier own interests as well. The industry literally goes out of thier way to effect consumers and prevent them from making progress and process easily without swallowing thier bottom lip and often thier bottom line for cost. It's just me? No..there's a method behind the diy community that unravels as you work and it's one that's brotherly and fatherly and fraternal....timing in to make you practice and eventually join the industry or be seen as disrespectful or a lone wolf. This applies to mechanics tattooist's artists musicians wrappers painters and customizers of all kinds. Don't even get into martial arts! You'll find you're automatically a kung fool!!! But anyways this wrap is nice. It's what you'd wanna buy to practice wrapping lights and it's thick..its not thin...it's not tint...it's a protective film wrap...buy it try it don't deny it...you can learn with this film and you'll just need some old lights to practice. The curves are all that's hard and with a squeegee and some heat you should be able to get that worked out. It's nice stuff.

Easy to apply, and looks good. However, the dark is very dark. I think I’ll reorder and go with the lighter one, but definitely worth the money in my opinion.

Do not buy. Don’t waste your money the same way I did. It is not easy to install. Requires especial skills and experience. I even used a heat gun to get rid of the wrinkles but didn’t work. if you remove the film to reapply, it will leave residue on the glass from the adhesive and won’t go away, also the film won’t stick well after removing it. The adhesive ruined the glass or surface on the headlight now I had to order a new pair aftermarket headlight to replace the actual, I should sue the seller because now it’s gonna cost me like $400 (parts and labor) to fix the damage. It was just a big mess I highly regret purchasing this junk. Do not buy if you don’t want to ruin your headlights

Product as described. Has great appearance until you get up close. Doesn’t work well with heat and edges start to peel up after a few weeks.

Easy to apply, the adhesive is strong. Need to be careful because it’s easy to rip once it’s set and you need to peel it back up to correct. The color wasn’t as dark as expected, it’s more of a smoked out color. It may seem easy to scratch but that’s because it has a really thin top layer that needs to be removed after installation. Will be buying again.

It took a few coats to achieve the amber look I wanted on the fog lights but it adheres really well to each other and the light surface

This was installed per instructions, but the result was bad. Originally I thought this was just me so I sought some professional help to install the rest and the result was still bad. The good: it's clear, It sticks, it's cheap The bad: 1: it sticks, too much. The material is prone to trapping air bubbles, even using a tool to slowly apply it in one even line. Air is very difficult to get out if you're more than 1 cm past the bubble and will give imperfect results if it's squeezed out through the part that's already stuck 2: The material is too stiff. There is no give in the material. It's not pliable at all. If your headlights are not flat as a cardboard, there will be issues because it cannot stretch to meet aby contours leaving you with either a gap between highs and lows or excess film and creases. Heating does help a little bit, but only a little. I have also found that when heating the film, while it will stretch a bit, it will become very thin and the adhesive on the underside will also be too thin to stick so heat it very mildly. 3: There are imperfections in the film. My corner lights were nearly flat and even cut to size, I found some excess from some wrinkles. Flat glass+ flat film= wrinkles? The glue is also not even. It seems even but I've noticed that certain areas may make a slight pocket after adhesion and needs to be pressed down again. Theres no air in these so it causes no problems but I can see how one of these might affect you if it happens in the corner of a curve on the headlights or something. My advice, get one of the more expensive films and get professional help. Idk how it worked out for others but from my experience, I cannot recommend

Product not as described. Not self-adhesive so USELESS. Delivered in tight roll which produced creases in film, even had this had adhesive backing, would have been impossible to install without creases on what should be a smooth film application.

افضل من المتوقع ،،، شكرا امازون

I used this product for my headlights but it didn’t workout

Installé en fin septembre 2025 et je vien de remarquer sa. Sa brûler la pellicule et sais mes lumière d'origine. Et arrière sa commencer a faire des plie