DJI Mini 3 pro Front Arm Shaft for DJI Mavic Mini 3 pro Drone Accessories,Genuine Spare Replacement

I'm thinking that the weakest link of the Mini3 Pro are these Arm Shafts. I clipped some thin limbs on a tree and the arm shaft broke (picture). The arm was fine (thank goodness - that would have resulted in "major surgery" and soldering on the Mini3). But when I started searching for replacement arm shafts, I couldn't find ANY available in the US. They were backordered at every parts supplier I checked out. My order from IMYHOO took a short while, but it arrived within the delivery window promised! I was able to remove the broken Arm Shaft and install the new one without any disassembly of the Mini3. There was just enough slack in the arm wiring to slip it over the new shaft. 2-Tips that might help someone out there ..... 1. First, install the new arm into place with the three screws. (There is not much room to get to the 3 screws, AND the screws are evidently aluminum - my magnetic T4 tool did not attract them. I dabbed the tool tip in a tiny bit of Vaseline and that worked great for me! I also jammed a small piece of paper towel into the opening around the wires (picture) ... I didn't dare risk dropping one of those tiny screws into the body of the drone ... I'm not sure you would be able to retrieve it!) 2. Then slip the arm over the new shaft and install the two screws. A lot easier fix than I thought when I first saw that pitiful arm dangling! And I couldn't afford sending it to a repair shop and paying $200-$300.

I bought the correct T4 driver set and this was a simple repair that only took 10 minutes. Drone flies good as new!

Fit perfectly, I broke a screw head off installing so hopefully I don’t have to replace again. That was my fault though.

Had this part laying around as insurance since my old mini 3 had this piece break but other issues made repairing it pointless. Inevitably crashed my Mini 3 Pro when I was testing Hyperlapse waypoints and left a tree right in the path of two points. Removing the old part was simple with a tech repair kit (highly recommended, Ifixit or most knockoffs will have what you need) and the replacement installed perfectly. The arm is steady in place and folds smoothly. Good as new!

It fits perfectly from the original from DJI. Has not broken although the other stock DJI part broke.

Front arm snapped off during regular collapsing of the drone after a flight...this part is clearly somewhat weak...be careful! Anyway, I thought I was in for a hefty repair cost, sending in to DJI. Cheap part, cheaply procured, and the the install was super easy. Wish they provided maybe one of each of the screws with this...I ended up losing one screw during the install but that's my fault.

Unfortunately, the DJI Mini 3 Pro front arm hinges were basically designed to be a point of failure to keep the actual prop arms/frame from being damaged. This means that while the shaft is metal, the piece that attaches to the drone body is a piece of plastic with three tabs; a weird hit can snap a tab off quite easily. These replacements work perfectly, but at roughly $18 each, it's an expensive lesson in drone care. All that being said, the shipping experience was truly bizarre. I ordered one pair (replacement plus a spare), and for some reason the next day the order was automatically cancelled. So I ordered it again, and Amazon said it would arrive the next day. Three days later, it did finally arrive. I have no idea what's going on with Amazon lately...

Needed to replace the stock piece and this aftermarket part fit like a glove!

Der Motor passt auch in DJI 4 mini pro.

Passt perfekt in meine Dji.