Accusize Industrial Tools 6 inch Master Precision Level in Fitted Box, Accuracy 0.0002''/10'', S908-C684

I was impressed with the accuracy of this precision level. Great bang for the buck. Doesn't beat a Starrett in accuracy, but for the money it was well worth the price!

I bought this to level a pool table. It did work for the job, but the problem was that this level is so sensitive, it would react to the imperfect surface of the slate. I didn't get it "perfectly" level according to this level, but I figure that a notch or two off with this level is probably still right on the money with a less sensitive level. I did need to calibrate it before starting, and again, it is ridiculously sensitive. Lay down some masking tape on whatever surface you're calibrating it on (does not need to be perfectly level, but very close). Set down the level, and mark the outline of exactly where you're going to place it every time. Better yet, use a framing square or other objects to mark the position. A small change in level position on a surface that isn't absolutely perfectly level will make a huge difference when trying to calibrate the level.

This level seems to be very accurate. It doesn't have the features of a $2000 tool but it does the job quite well. It's a tad finicky to calibrate but once I got it spot on it held it's setting. I bought it to set up a lathe. I am not an expert but I think it's almost too sensitive for that purpose. 0.0002" per graduation is quite hard to achieve when making adjustments. The only other shortcoming I could see is there is no relief cut in the base surface to ensure you are only making contact near the ends of the level and not in the middle.The level is quite heavy and did bang around in the wooden box and break it up some. No damage to the level though. They could package it better so it couldn't move around in the box.

These levels are really accurate. Tiny adjustments were immediately visible in the movement of the bubble. They come in a wooden box for protection. They worked perfectly to hep us install a large piece of precision equipment.

Got this to level my new Novakon Torus Pro mill.This thing can detect the adjustment on a leveling pads when rotating the adjustments on the feet with only a couple of degrees of rotation. Very sensitive.... worked great.

Used this level to dial in the alignment and leveling of a cnc lathe. Worked great, making good parts now.

came to me needing to be calibrated, ended up borrowing a buds Starrett. Spend the extra $50 and get a Starrett.

First one was twisted a lot and I can rock it over diagonal.Replacement level is good and give repeatable measurements.You have to calibrate it anyway, which is not hard but, yes, requires lot of patience and good hands.Calibration screw is very sensitive.My thinking is you can buy it if you have a surface plate around to control level flatness.