Universal Nylon PA6 Magnetic Jack Pad Jacking Puck Adapter Support Compatible with BMW, Mini (Qty 1, Red)

These are perfect for Corvette vehicles.

This is a review for the Mercedes pad made to fit the indention on the jackpoints on the sides of the car. The 2000's and newer MB have these weird rubber pad things on the jackpoints instead of a typical pinch point or even just a flat surface, which make it difficult to use a standard jackstand. I'm happy to say that these aluminum pads are a near perfect fit and allow use with both a jack and/or jackstand.I did consider the rubber versions of these pads, but read too many reviews about how the rubber ones deform, and didn't want to deal with that, so went with the aluminum pads.When I test fitted these pads before use, I was a bit concerned since they are not a flush fit in that the middle portion is about 1/4 inch too long, which means that the car rests on just the middle raised portion. I wasn't sure quite what to expect with this kind of weight distribution, so I jacked up my car by the center jackpoint, and then lowered them onto the jackstands with these jack pads in place, half expecting the car to slide off of these slick looking aluminum pads. However, once the weight of the car was on them, there was absolutely no movement at all. I did the usual shove test to make sure that the car wasn't going to go out of balance and was going to slip off the jackstands and fall on me and crush me while I was working on it, but it was as solid as can be.Quite happy with how these aluminum pads performed, and also happy to see that there was no deformation in the metal and no signs of scratches or indention or any defects after the first use.

This product works really well for Audi and VW cars to ensure you’re using the pinch weld jacking points correctly. My only gripes are that it’s not a bigger diameter or magnetic on the bottom to keep it in place on the jack itself which can still move under the weight of the car. Obviously still use stands but it this product was helpful in swapping out the summer wheels this past weekend for winter tires on my 14 S4 and the wife’s 21 Tiguan

I got a few similar ones from Amazon but this was the best - first off it is metal, check all other people complaining about rubber breaking under jack - umm no thanks. This piece fit right in the opening of my 2020 GLC43 (for factory jack stand). It does go higher a bit but it does not impact anything because it rests on the top of the jack pad, not sides. Factory jack works the same way - check pics. Super sturdy, just replaced rear brake pads myself.

All of my BMW vehicles were purchased as pre-owned vehicles. Every time I buy a "new to me" used BMW I am never surprised when I lift it off the ground for the first time and discovered that the jack pads have been completely destroyed by either the previous owner, or, more likely, the people that have done maintenance on the vehicle on behalf of the previous owner. People who are new to the brand simply don't know how to properly utilize the jack pads that are fitted to every BMW vehicle. The jack pads are made out of hard plastic that is fragile if used incorrectly, but incredibly strong and provide extra stability when used properly. You must use a jack pad adapter of some type in order to utilize them correctly. Most people, however, simply don't want to spend any extra money to use them properly, or don't know what they are, so the jack pads get destroyed over time. Then the vehicle gets sold to someone like me who ends up having to replace all of the broken jack pads. It's my lot in life.What makes these Potauto Universal Aluminum Jack Pad Adapters SO useful is that they are very well made, they are durable because they are metal, you can get them in bright red, and they are very reasonably priced. Why does it matter to me that they are red, you ask? Well, I once drove around for two weeks with a black jack pad adapter made by a different manufacturer stuck up inside one of my destroyed jack pads without even know it. Once I had lowered the car, the adapter didn't drop out of the destroyed jack pad. It was dark, the jack pad adapter was black, I was tired, and I didn't notice that it was stuck up in the damaged jack pad. Can you imagine a metal jack pad adapter coming off at 75 mph on the highway! Luckily that didn't happen, and I'm surprised that it didn't. All of my jack pad adapters are now red, and I never leave one behind.Therefore, these Potauto Universal Aluminum Jack Pad Adapters in red are a must have if you work on your own BMW. Utilize them properly and keep your jack pads in factory condition.

I bought four of the black aluminum Mercedes adapters for my car. They work great with a jack and with (flat top) jack stands. They’re tough and lightweight- will probably last forever.

Very well made jack pad. A must for your late model Mercedes. Eliminates the chance of bending the pinch joint or your rocker panels. Easy to use and eliminates the possibility of your jack sliding off the lift point .

I did some reading and there aren't many pads that actually do the job properly. The key to a good jack pad for the BMW is to make sure the lips of the jacking points do not do the lifting by making contact with the round part of the pad. The top, rectangular piece of the pad should seat in the slot and touch the frame. It the outer rim of the pad is doing the lifting, it will still crush the plastic under the car. I did some measurements and this was the one. Bought it and it worked as expected for my 2022 BMW x5. If anything changes regarding it's durability, I will update this review.

OK, for you BMW heads, take head PLASTIC/RUBBER pucks are BAD news UNLESS, they are more that 12mm tall, the colum that fits into the adaptor MUST be tall enough to support it, OTHERWISE it will REST on the rubber and bend it HORRIBLY, this will cause wear and tear and it to break, NOT GOOD if your under a jack.I did a test fit and it fits my 2 series properly, very sturdy un breakable nylon,I will modify my review if I have any issues, which I doubt.Looks great so far awesome product, DONT WASTE YOUR TIME, MONEY and SAFETY on Rubber adaptors... just dont

They fit fine although the magnets did not hold the pucks up. Not sure if the magnets are too weak or non metallic on the car location. I just had to line them up with the jack.Overall pleased with the value of this purchase.

Buena calidad, cumple con su propósito, pero no fué lo que yo necesitaba.

Not sure why these are magneticAlthough they do have magnets in them, they are useless in that regard, as the magnets can’t work through the plastic jacking locations on the car, so these are pointless.These are just overly expensive plastic jacking adapters, nothing more.

An excellent price for a quality product!