Replacement Parts for Shark AI AV2501S AV2501AE RV2502AE RV2520AOUS AV2510AOUS AV2511AE RV2610WA RV2610WD Accessories Kit with Main Roller Brush Filters Foam/Primary Filter Sweep Side Brushes

Good

This is an all-in-one kit for a group of different models, so not all parts will work with all models. For my AI (don't have the exact mode #, but I bought it from Costco), that meant the black filters are useless, but I believe every other part will work.I bought this kit because our model is around 1.5 years old, and I keep getting "dust bin not installed" or similar errors. From experience, I find these are usually related to a clogged filter, or rather the base tries to suck the debris out of the vacuum unit, and senses a low pressure differential which it then INTERPRETS as something not being installed. This is particularly frustrating when you're trying to solve a problem! I was also getting a fair amount of the vacuum "flap" on the vacuum unit being propped open with small debris that should otherwise be cleared out - that was also a signal that the base just didn't have the ability to empty the vacuum unit.All this said, there are a few filters in the unit which you need to clean regularly depending on what you have in your home. For us with a husky, that means cleaning things a couple times a week. Don't forget the filter in the base unit that's under a cover on the top left side!At any rate, our unit was getting tired - in addition to the filters, the beater bar was also..... beat. The bars in this kit fit just fine, and I anticipate that the unit will clean better, as our old beater bar was so worn I doubt it really brushed the floor like it should.For the cost I think this is a great value.

Everything in this , fit great in my AI robot , thank you and great price

So started looking and it was a nightmare trying to figure out what parts correlates to my model #. For those wondering mine is AV251WAXUS. This kit everything else beside the main roller brush works but you can make it work with the old roller. I’m going to explain the pictures above to try to help.Instructions:1. You can pull the spinning piece off your old roller. 2. Then go ahead and pull the plastic end caps off3. You can then slide out the brushes and the fabric from the old rolled and through them away, but pay attention to the orientation of how they go in.4. Repeat process 1&2 on new roller.5. You can then slide out the new brushes and fabric.6. Install the new brushes and fabric into the old roller.7. Put the ORIGINAL plastic caps back onto the roller8. Snap the rotating piece back on.9. Install it back into the vacuum.Now it will fit and work flawlessly as intendedJust wanted to help someone else who may have the same issue.For that reason alone I can only give it 4 stars due to the dimensions being off.Also if you install the new roller without the changes it will be super tight and will give you an error that the roller brush it stuck.

It was so easy to replace the filters and brushes—less than 10 minutes. I was shocked at how dirty the inside of the machine was. I called the company, and they said the parts were obsolete. I was thrilled to find it on Amazon. It was a Great Price and an easy fix. The machine even sounds different.

Every piece fit perfectly. I did need to take a screw out to get one filter in and a star wrench for the front sweeper wheels happy with this purchase and will buy again

I have gotten several of these over the years and they have been a great kit until the last order. Both the brush rollers keep jamming and getting locked up, cannot ever turn them by hand. Pull it out and work on loosening it up so it spins, put in back in and a few minutes later the same thing. Guess it was just a bad batch of brush rollers but does not help me much and need to replace them.

Great deal for your shark. Extra rollers and filters and brushes to keep your vacuum running tip top.

Needed some replacement filters for our Shark AI. The filters fit perfectly and the vacuum is running like new again! However the brush roll seems rather tight.Update: I had to remove the brush roller as it created too much friction from improper fit. It was draining the battery and getting stuck a lot. Purchased a separate replacement brush roll from a different manufacturer and it works well.

ممتازة لكن مو نفس جودة اللي تجي مع المكنسة الفرشة والريش

I have been looking for replacement parts for my Shark AI robot vacuum since I got it. This kit is great, replaced all the parts that came with the kit, everything fit perfectly. The round Foam filter is slightly shorter, but it still works just as well. The Main brushroller sounds quiet and the vaccum ran one cycle with no issues. Will be ordering these replacement parts again when needed!

Can’t comment yet as I have only used the side brushes which were easy to replace and they worked well

Good selection of parts. Need more of the rotating brushes as my Shark goes through them quickly.