Fractal DesignCelsius S24-240 mm Radiator - Silent Liquid CPU Cooler - PWM - Intelligent Controls - 2X Fractal Design Dynamic X2 PWM GP-12 120Mm Silent Fans Included - 1/4" Fitting - Black

The Fractal Celsius S24 is an awesome AIO cooler. Very well built and easy to install. Cooling plate has thermal paste pre-applied to make the installation easier. Very effective cooler that keeps temps on my AMD Ryzen 7 5800X low. Very subtle "stealth" design with all black finishes and NO LEDS (that's a plus for me). Tubes are covered in woven sheathing that hides wiring, giving a very clean finish to the installation. The cooler offers 2 pump modes, Auto and PWM. Auto lets the cooler control the pump speed, PWM lets it be controlled by BIOS/system software. Very happy with this product and would buy Fractal again without hesitation.

These are pretty great for cooling your rig. You can change from 2 modes: Auto = slower but quieter and PWM = louder but faster (meaning better cooling). This can be a good thing if you do not like to tweek with fan settings and all that, but also can be a negative if you do want to set the fan speeds to hit certain temps without blasting your fans faster than it really needs, which leads to louder PC configuration.I overclocked my 8700k to 4.9 using these with no issues at all. Generally, these are very quiet compared so some, such as the H100i (which I also use on anther rig).

If you want an easy painless setup especially for first time builders this is the AIO for you. No software needed, no messy cables, no problem.I bought this for my Ryzen 7 1800X (Upgrading to Ryzen 7nm next year) I've looked and compared other AIOs from Corsair, NZXT, and even the new ASUS AIOs. I thought I might regret buying this but once I installed it all that went away. Even though it's a last gen asetek coldplate design it has the 5 year warranty to back it up compared to the Asus Ryuo/Ryujin which is 3.The one thing I did was I replaced the stock fans with the Noctua NF-A12x25 and NF-A12x15 for a push/pull config Running Prime95 I was hitting 67C max @ 3.9GHz OC. My system idles at 30C which is definitely better than my air cooler which was at 40-45C idle. Pump definitely doesn't make any noise which made me wondering if it was even running.The one note I can say is make sure you use the proper mounting brackets for AM4 motherboards vs AM3 and older. I made a stupid mistake and mounted the wrong one and my CPU hit 100C which tripped the overheating protection.Conclusion: Buy this cooler, Even if it looks bland and boring the ability to refill/expand the loop was worth the money and the fact that they're slapping 5 years on this just like the other high end competitors makes me really happy with my decision.CPU: AMD Ryzen 1800X 8 Core, 16 Threads @ 4GHzCPU COOLER: Fractal Design Celsius S24 240mm Push/Pull (2x Noctua NF-A12x25 PWM, 2x NF-A12X14 PWM)MOBO: ASUS Crosshair VI Hero w/ Intel Dual Band Wireless-AC 8265GPU:Nvidia GeForce® EVGA RTX 2080 Ti FTW3 Ultra @ Stock (for now)ADD-ON CARD: Elgato HD60 Pro PCIe Streamer CardRAM: G.Skill Trident Z RGB 32GB 4x8GB @ 3200MHz CAS 14-14-14-34-52 (Stable, Samsung B-Dies)SSD: 1x Toshiba OCZ RD400 256GB NVMe (Boot Drive) 1x Toshiba OCZ Vector 180 480GB(Game Drive), 1x Toshiba OCZ Vector 180 960GB (Game Drive), 1x Intel 545s 256GB (Game Drive), 1x Intel 545s 512GB (Game Drive), 1x Samsung 860 EVO 500GB (Game Drive)HDD: 2x Toshiba X300 6TB 1x Seagate Ironwolf Pro 8TBPSU: EVGA SuperNOVA 1000 T2 80+ TITANIUM 1000W w/ Cablemod Pro ModMesh Sleeved Cables. CASE/FANS: Silverstone Kublai KL-07B w/ 2x Noctua NF-A12x25 PWM, 2x NF-A12X14 PWM (Intake) 1x Noctua NF-F12 industrial 3000 PWM (Intake) 1x Prolimatech Ultra Sleek Vortex 140mm Slim PMW Fan (Exhaust), 1x Noctua NF-F12 industrial 3000 PWM (Top Exhaust), 1x Noctua NF-A14 iPPC-3000 PWM (Top Exhaust)

AIO coolers are a tricky deal. Most pumps come from the same manufacturers, and the differentiation usually comes down to (1) quality control, (2) tube and stock fan quality, (3) ease of installation, and finally (4) aesthetics. Poor QC is usually what causes us to read those nightmare stories about AIO coolers- unexpected and random leaks being the top concern. The second horror story is usually installation, bending pins or otherwise incorrectly installing the radiator and fans.Fractal's AIOs are way down there on aesthetics. No RGB, very spartan appearance. But the other 3 points are top notch. They have a reputation for good quality control and long lasting parts. The tubing and fan quality (stock) are great. And their installation instructions are reminiscent of Ikea- clear, consistent and heavy use of good visuals.I can't complain. I've had the S24 for about two years now, installation was smooth and of course no leaks. Sure it doesn't have fancy lighting but honestly I *wanted* an AIO that focused more on quality than aesthetics. Fractal knocked it out of the park with their AIOs. No nonsense, just install and play. I barely notice the noise from the pump; my Corsair maglev fans are louder. Performance is top notch, my 2700x runs cool 100% of the time. Overall would recommend Fractal's AIOs and some of their fans over the competition. It's easy to get carried away with RGB and bells and whistles but what you really (should) want in an AIO cooler is quality control & ease of installation.

The block was a good bit bigger than I expected from the pictures. It does keep the processor relatively cool and is virtually silent, which I like. The only problem I have with it is that the hoses from the block are not angle friendly and have to be moved into a very weird position to get the side panel onto the Lian-Li A4-H2O, which caused the woven outer sheath to pull easily out of the connector, exposing the power wire wound around the water hose. Good cover up job, but ultimately, not angle friendly. One of the best coolers for the money, although could be greatly improved with 45 degree swivelable connectors. the straight connectors are swivelable, so angled ones can be also.

Changed out from noctua dh14 to this because of a new case that wouldn't fit the big air cooler. Hoses hit the door but they bend easily without kinking. Temps are lower than before with very little noise at all. I used the stock thermal compound but I have a 9900ks so compound is not super important. I plan to upgrade this to a full kit because of the expandable setup which is the reason I picked it at all.

I bought this for a new build and everythign was smooth sailing. Because I used a 12th gen Intel processor, I had to get a mounting bracket sent from the company to fit the new lga1700 socket size. The shipping company dropped the ball on that, but that shoudn't reflect negatively on Fractal Design. Once I had all the pieces I needed, it was simple to install and it runs very quiet.

Effektive Kühlleistung: Die Wasserkühlungseinheit bietet ausgezeichnete Kühlleistung für High-End-Gaming-PCs. Mit einem 240-mm-Radiator und leistungsstarken Lüftern sorgt sie für effiziente Wärmeableitung, was die Leistung und Lebensdauer der Komponenten verbessert.Leise Betrieb: Die Celsius S24 ist für ihren leisen Betrieb bekannt. Die Lüfter sind so konstruiert, dass sie auch bei hoher Belastung ruhig bleiben, was zu einer angenehmeren und weniger störenden Nutzung führt.Einfache Installation: Die Installation wird als unkompliziert und benutzerfreundlich beschrieben. Das Kühlsystem kommt mit einer klaren Anleitung und allen notwendigen Montagematerialien, was die Einrichtung für die meisten Nutzer einfach macht.Hochwertige Verarbeitung: Die Bauqualität und die verwendeten Materialien sind von hoher Qualität. Der Radiator und die Pumpe sind robust und gut verarbeitet, was zur Langlebigkeit und Zuverlässigkeit des Produkts beiträgt.Ästhetisches Design: Das schwarze, schlanke Design der Wasserkühlungseinheit passt gut zu modernen Gaming-PC-Gehäusen. Das optische Erscheinungsbild wird von den Nutzern oft als ansprechend beschrieben.Kundenzufriedenheit: Die hohe Kundenzufriedenheit, insbesondere im Hinblick auf Leistung und Lautstärke, trägt zur Gesamtbewertung von 5 Sternen bei. Viele Nutzer berichten von einer signifikanten Verbesserung der Systemkühlung und einer stabileren Systemleistung.

Nutze die AIO auf einem i9-14900k und bin sehr zufrieden damit. Die Verarbeitung finde ich sehr gut, und auch durchdacht.Flüsterleise und seit erneuter Montage mit MX-4 Paste sehr gute Kühlung des Hitzkopfs.Aufgrund des Angebotspreises knapp 70€ ein sehr gutes P/L für mich.

Entrega rápida, la calidad del producto alta. Todas las expectativas de los bienes estaban justificados.Si. Elegí la entrega rápida de dinero extra y recibió un excelente resultado. Pero si elige la entrega estándar, aparecen problemas incomprensibles (tengo una experiencia desagradable con otros productos)

Utilisé pour un processeur Intel Core i9-10805K, je n'ai rencontré à ce jour aucun problème de refroidissement sachant qu'il est utilisé intensivement. Niveau sonore, rien à redire, c'est un 360 mm engendrant un flux d'air conséquent, il se peut qu'il souffle un peu plus de temps en temps.Néanmoins le watercooling ne fait pas tout, assurez-vous d'avoir une pâte thermique de qualité. Il est inutile d'avoir un watercooling aussi efficace si la pâte thermique est bas de gamme. Vous pouvez dans un premier temps utiliser la pâte thermique déjà appliquée sur le watercooling, il fera l'affaire.