EZARCPrecision Screwdriver Set, Laptop Screwdriver Kit, 145 in 1 Magnetic Computers Screwdrivers Repair Kit with Case with T5 T6 Torx for MacBook, Eyeglass, Phone, Watch, Electronics, Toys, DIY

Since I have only had this tool kit for a week, take my review with a grain of salt. I can only provide first impressions and not provide any comment as to durability of this tool kit.I was impressed generally with all aspects of the tool kit. Each of the tool bits are approximately at least one inch long with about half of this bit fitting snuggly into the magnetic screw driver handle.A nice heavy tag board chart is provided with the labeling and location of each tool bit. Since this card is loose in the kit, I can see it easily getting lost and or damaged. For that reason, I took a picture of it for future reference. I think the only improvement with this card would be for it to be laminated and then attached to the tool kit so that it would not be lost. I did note that the tool bits are stamped with their designation, so even without the chart, you can determine which tool you have in hand.There is more than one of most of the tool bits, so if the tool bit is damaged or lost, you still have another one in the kit to use. I believe the kit claims 16 different tool bits for most applications. Many of which I probably will never have a use for, but it is nice to have that option available if needed.The quality of all of the components seemed to be excellent. I can not attest as to how well they will hold up under heavy use. I liked the positive magnetic fastening of the tools into the handle. The snug fit provides a positive control over the use of the tool bit.I found the tool bits difficult to remove from the case. I have big hands. The bits are very close together and fit tightly in their slot in the tool kit. Big hands and tiny, closed placed bits provides a challenge. I used a pair of needle nose pliers to remove the bits I needed to use. I think that with use, the fit will loosen up and make it easier to remove bits from the kit.I found the flex tool extension quite stiff and it will not make tight bends. It is well made and I am sure it will last a long time. While it will make a "U" bend, it is not easy and requires a large radius.I am not sure what the guitar like picks are designed for or what purpose they serve. I guess in a pinch, you could use them to play your guitar.Overall, I was very impressed with a nicely designed tool kit. A kit, that if you take care of your tools, should last a long time.

I am definitely pleased with this product. It's compact and has everything I need it for plus a small storage compartment for extra screws and what-have-you. I think the screwdriver could have been better made but again you get what you pay for. I would suggest it to my friends.

Nice compact size with lots of magnetic tips. I like this enough this is my second one. Recommend it.

Best designed precision screwdriver set I've ever owned. Love the form factor. Bought it for pocket knife maintenance. Pretty happy with it. Highly recommend.

This thing is great! The outer case is made of aluminum, at least 1.5mm thick. The inner bit holder is held in firmly with a push latch, so there's almost no chance it will slide out when not in use. I can't speak for the durability of the bits yet, but the (machining?) Of them is definitely higher end. The screw driver handle is really nice, all aluminum with a soft silicone grip. The spinning cap is SO smooth, I'd swear there's a tiny bearing in there somewhere but I can't get it to come off to see. The only thing that would make it better is if it had stronger magnets to hold the bits in place. They are not at all weak, but the bits tend to slide up in down. I've never had one fall out though.

Very nice that all the bits are magnetic and the driver is hidden in the case.

Has a lot of bits and a great case with extra compartment for bonus screws!Pretty much covers all your small electronic screw needs.

Pretty unique and cool little set. It also has the little bit I need to take apart my joycons

Mi occorreva un set di cacciaviti di precisione e non volevo comprare quelli di ifixit pubblicizzatissimi ma prodotti cinesi rimarchiati, quindi ho scelto questi che sono, si cinesi ma già a colpo d'occhio si vede che sono di qualità. Il set si compone di due parti, un guscio di alluminio che con una clip tiene in posizione la rastrelliera in plastica degli inserti divisa per file e calamitata in modo da non far cadere gli inserti, gli inserti sono molti, con misure molto varie, bruniti e realizzati molto bene e su ognuno e incisa la sua misura. Da un lato e presente un interruttore che se spinto fa uscire la testa del giravite che può essere estratto, anche lui viene tenuto in posizione dalla sua calamita attraverso un perno di metallo(molto ingegnoso) è realizzato in alluminio nero con sulla sommità una testina girevole che agevola l'avvitatura e dotato di una calamita forte che trattiene bene gli inserti anche se lo si scuote molto forte.In conclusione consiglio l'acquisto e se la recensione vi e stata utile cliccare il bottone qui sotto. Grazie e Arrivederci.

This is one of the nicest tools Ive had the pleasure in receiving / using for a long time... The packaging is almost "apple" in its clean and functional form. The use of a push clip to remove the tool carriage from the carry sleeve is slick and faultless. Once the carriage is removed from the sleeve the individual drivers are held in place magnetically - so no clips to force or break... The driver handle is exracted just as easily. All in all its as the title... Well designed, well made, well finished... very nice indeed. Several friends may well be getting one of these for xmas!!

good for PC disassembly,or similar, the unit is compact, can see at a glance if any tips are missing, tips don`t fall out when inserted, each tip is portrayed by type, each tip stamped by size,very robust, heavy, probably overkill for very occasional use, would be ideal for professional worker, I did not have any difficulties using it, the best of the bunch, would only need to purchase this once,would last a long time, unless lost, or stolen. no postage charge on amazon, caveat, i have not used it extensively.

I must admit these are of superb quality. Bits are true precission and not made out of cheap alloys, proper high quality. Metal casing is a nice touch too.Handle as in one of the other reviews is a letdown but sorted with couple of heat shring tube pieces for better grip.But just for the bits themself have to give it a 5, very rarely you can find them so nicely made at that price mark (~£22 for a whole set).

I bought this set to replace an old set of 6 small screwdrivers, to give me a greater range for fixing small items such as spectacles, toys, mechanical ornaments, etc. There is such a comprehensive selection of screwdriver heads that there is probably every size I could ever need. Also, the design is very clever, as all the heads and the driver bit are easily accessible and contained in a slim metal case.